I'm BLUE Posted April 12, 2013 Report Share Posted April 12, 2013 Located: Portland,OR L16 Long-Block (no front crank pulley or flywheel) "210" head stamping on the side near the rear of the head (not front). Bought it for a friend and he didn't want it.. :rolleyes: I was told it ran and drove good. Price = $150 SOLD All aluminum "Champion" brand radiator. Came out of a 510 , and welds look GOOD. Price $140 + shipping. ( feeler for sale , will keep if no takers thanks ) * 510 L16 weber 32/36 DGV + Intake + adapter plate + air cleaner SOLD * 510 starter - $25 SOLD * 510 alternator - $25 SOLD * 510 alternator bracket - $10 SOLD * L16 Valve cover (painted) - $25 SOLD * L16 510 Header (clearanced at one tube...) SOLD * L16 Timing Cover - $30 SOLD * L16 Oil Pan $30 SOLD * L16 Fuel Pump $20 SOLD * L16 "210" side casting head = $60 SOLD * L16 short-block less oil pan , and timing cover = $75 SOLD * L16 Flywheel + clutch + pressure plate + clutch collar + throwout arm + TO bearing + Slave Cylinder = $100(disc looks fairly new and flywheel looks turned !) * L16 Engine mounts and Engine block brackets SOLD * L16 Pulley SOLD * L16 Cooling Fan - $20 SOLD * L16 alternator to block lower bracket - $15 SOLD L16 Point distributor. $35 + shipping PM or message me. Thanks DTP Link to comment
Kirden Posted April 12, 2013 Report Share Posted April 12, 2013 Needs more Ace bandage imo... GLWS :) 1 Link to comment
I'm BLUE Posted April 12, 2013 Author Report Share Posted April 12, 2013 For Sale Ad updated with Weber 32/36 + manifold + carb adapter to intake with air cleaner and air cleaner housing. Link to comment
Sealik Posted April 12, 2013 Report Share Posted April 12, 2013 TTT Good price on that Weber combo..... GLWS..... :thumbup: 1 Link to comment
I'm BLUE Posted April 12, 2013 Author Report Share Posted April 12, 2013 TTT Good price on that Weber combo..... GLWS..... :thumbup: Thanks Sealik :thumbup: woot ! Link to comment
Kirden Posted April 12, 2013 Report Share Posted April 12, 2013 Actually DTP, would you happen to know what the difference between that manifold and an L18 manifold would be? I haven't taken the time to look into it, but that may be what I need for my 620. 1 Link to comment
I'm BLUE Posted April 12, 2013 Author Report Share Posted April 12, 2013 Actually DTP, would you happen to know what the difference between that manifold and an L18 manifold would be? I haven't taken the time to look into it, but that may be what I need for my 620. I honestly am not 100% sure on that Kirden un-fortunately :-/ sorry man ! Link to comment
nikleNdyme Posted April 12, 2013 Report Share Posted April 12, 2013 Where would one find gaskets for this setup. Link to comment
I'm BLUE Posted April 12, 2013 Author Report Share Posted April 12, 2013 Where would one find gaskets for this setup. I pm'd you nikelNdyme :) Thanks DTP Link to comment
I'm BLUE Posted April 12, 2013 Author Report Share Posted April 12, 2013 All pm's replied Thanks Link to comment
bananahamuck Posted April 12, 2013 Report Share Posted April 12, 2013 Actually DTP, would you happen to know what the difference between that manifold and an L18 manifold would be? I haven't taken the time to look into it, but that may be what I need for my 620. If your asking if this will fit an L18 ,,,yes it will bolt up exactly like stock .. Link to comment
Kirden Posted April 12, 2013 Report Share Posted April 12, 2013 I just wanted to make sure the ports would be the same. However, I have decided to stick with what I have for now. I need to spend more money on the B210 and get it running. Link to comment
I'm BLUE Posted April 14, 2013 Author Report Share Posted April 14, 2013 Carb + Intake + adapter plate + air cleaner combo = SOLD. Link to comment
I'm BLUE Posted April 14, 2013 Author Report Share Posted April 14, 2013 Original Post updated with Aluminum radiator , more stuff, and items sold. Link to comment
I'm BLUE Posted April 18, 2013 Author Report Share Posted April 18, 2013 Ad updated with L16 picture and info at the top of the ORG post. Link to comment
I'm BLUE Posted April 18, 2013 Author Report Share Posted April 18, 2013 Aluminum Radiator is on hold for a local member until a further notice :) Thanks Link to comment
I'm BLUE Posted April 19, 2013 Author Report Share Posted April 19, 2013 Price drop on L16 longblock to $100 for a bit then back up to regular $150. Did a flow test on the aluminum "champion" radiator. *No Leaks *No Seeps *Good flow ! *Radiator has been flushed of 95% of all the nasty brown crap. Here are some measurements of the aluminum radiator as well. It's still ON HOLD for the moment. Tape measure Total Length (tape end on fartherest side of the tank) Total length from drivers side tank outer edge to passengers side tank outer edge Tank depth from core support toward engine Core depth/thickness Core/Radiator Height Inside drivers side tank edge-to-passengers inside side tank edge Just because lol Link to comment
BlkSSnCPT Posted April 20, 2013 Report Share Posted April 20, 2013 I take the alt bracket, is that price shipped??? 90221 if not, lmk thnx!!! -Rob Link to comment
I'm BLUE Posted April 20, 2013 Author Report Share Posted April 20, 2013 I take the alt bracket, is that price shipped??? 90221 if not, lmk thnx!!! -Rob Hi Rob, It's not the price shipped :) I sent you a quote via messenger/PM (access located at the upper right hand corner of your screen if you're not sure :) ) Thanks DTP Link to comment
novita1021 Posted April 21, 2013 Report Share Posted April 21, 2013 Looks like that radiator might also work with sr20 lol Link to comment
I'm BLUE Posted April 22, 2013 Author Report Share Posted April 22, 2013 Looks like that radiator might also work with sr20 lol lol IDK but sounds cool.. ( no pun intended ) Link to comment
I'm BLUE Posted April 27, 2013 Author Report Share Posted April 27, 2013 This weekend only L16 = $80 You come pickup. Thanks DTP Link to comment
racerx Posted April 27, 2013 Report Share Posted April 27, 2013 where you located at and is that distributor single or dual points? Link to comment
I'm BLUE Posted April 27, 2013 Author Report Share Posted April 27, 2013 where you located at and is that distributor single or dual points? Located: Portland,OR The distributor is a single-point unit. Thanks Link to comment
Recommended Posts