konig209 Posted April 9, 2013 Report Share Posted April 9, 2013 Are they really that rare? What are they worth? I have a pair on my truck and i know of maybe two or even three other sets. Pm me offers. And ill prolley let go of my pair the plastic is gone on mine. ill post a pic tommorow. I know i shouldnt post this up on here but its 521 specific. Quote Link to comment
Rocket Dog Posted April 10, 2013 Report Share Posted April 10, 2013 You can replace the plastic and rehab the chains. There's a thread here somewhere showing that. You can replace the chains with small wire cable and make it a little tougher to steal the tail gate (cut the cable versus unhooking the chain). Quote Link to comment
datsunaholic Posted April 10, 2013 Report Share Posted April 10, 2013 521s aren't that easy to steal the tailgates anyway. Chain vs cable isn't the hard part, getting the hinges apart (they don't unbolt like 620s do) requires a drift and a hammer. Ain't getting a 521 tailgate off quietly. I don't see what's so special about 521 chains. It's just a narrow-link chain with flat steel hooks. At least they are on my 520. I've seen folks make them out of (old school) tire chains. Quote Link to comment
oldskoolvws Posted April 11, 2013 Report Share Posted April 11, 2013 The OEM chains are for the purists or the serious collectors. Once in a while dumb asses like me. We all know they are just chain and stamped hooks with a plastic sheath. They fall off and disappear on the freeway. Cannot match a chain and threaded coupler on any Sunday. Scratch, rattle and make noise if there's no plastic. Are easy to steal. In fact, likely the easiest thing to steal on the truck period. Look, hella, hecka, mucho cool when a bunch of Datto heads get together. Morale of this story, if you run OEM chains, secure the truck hook by cable or zip tie so it doesn't find some bushes or a new home that your not in. Quote Link to comment
konig209 Posted April 11, 2013 Author Report Share Posted April 11, 2013 Funny thing is mine have fallen out of place so many freggin times but never i mean never out of the bed lucky me i guess. Quote Link to comment
Rocket Dog Posted April 11, 2013 Report Share Posted April 11, 2013 http://community.ratsun.net/topic/52069-tailgate-chain-covers/ http://community.ratsun.net/topic/46078-tailgate-chain-measurments/ <----- tailgate chain measurements http://community.ratsun.net/topic/33663-tail-gate-chain-latch/ http://community.ratsun.net/topic/51651-tailgate-straps/ http://community.ratsun.net/topic/38049-tailgate/ <---- hinge pin dimensions 1 Quote Link to comment
konig209 Posted April 11, 2013 Author Report Share Posted April 11, 2013 I have the oem but thanks and i know where more are Quote Link to comment
Rocket Dog Posted April 11, 2013 Report Share Posted April 11, 2013 I still owe you hinge pins. I have one stock tailgate chain. You have more? Quote Link to comment
konig209 Posted April 11, 2013 Author Report Share Posted April 11, 2013 I have a pair on my truck. they drive me nuts. Akways falling and shit. But i was thinking of using some rubber coated cable like what they use for dog chains with some dog bolts and sell these oem chains i have. Then go fetch the chains on the ones i know of to sell. Quote Link to comment
zed1 Posted October 18, 2021 Report Share Posted October 18, 2021 Among my spare parts are tailgate chains. One pair (left) have a hole in one hook and long links. One pair (right) have no hole and short links. Does anyone know the model year(s) the variations were applicable to? Thanks, Keith Quote Link to comment
420n620 Posted October 18, 2021 Report Share Posted October 18, 2021 (edited) my 71 521 has the chains / long links with the hole in the hook. checked the 69 521 parts truck, it has the chains with no hole, long links. Hope this info helps. Edited October 18, 2021 by 420n620 1 Quote Link to comment
dat521gatherer Posted October 22, 2021 Report Share Posted October 22, 2021 I've seen dozens of sets and all were long links. The set on the right is not for a 320 I can tell you that. Quote Link to comment
dat521gatherer Posted October 23, 2021 Report Share Posted October 23, 2021 Here is a nos set that does not have a cadmium finish. That should through you off.🤪 Quote Link to comment
dat521gatherer Posted October 23, 2021 Report Share Posted October 23, 2021 The only set I ever came across with holes are the ones I drilled into them. It makes me wonder if they ever came drilled or plated from the factory. A quick google check shows luvs and couriers have different styles as did the 1200. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.