Eagle_Adam Posted September 11, 2013 Author Report Share Posted September 11, 2013 Since I was on a roll I figured I should probably address my lack I breaks.... One of my two favorite ass to see up in the air . . . . . :) Rear diff was leaking So it got new fluids and a wipe down Onto the brakes! Which for the first time ever from a PO looked good! Newer shoes and cylinders :) So I adjusted and bled them..... Only to find out I'm missing an ebrake cable on the pass side.... But whatever, one side works ill address it when I do the rear disc swap :/ Quote Link to comment
cruznude Posted September 11, 2013 Report Share Posted September 11, 2013 well......... its all or nothing this time guys! Here she is 79 620 King Cab Ill be picking her up sunday! I know very little as of yet, L20 auto tragic "ran when parked" sat for 2 yrs in a garage some rust but nothing too serious Love that truck, had same back in the day. Whats the color code Adam? Your swap is gonna be bad ass!! Quote Link to comment
Eagle_Adam Posted September 11, 2013 Author Report Share Posted September 11, 2013 Love that truck, had same back in the day. Whats the color code Adam? Your swap is gonna be bad ass!! that truck.... was a rattle can and spray foam special...... Quote Link to comment
Eagle_Adam Posted September 12, 2013 Author Report Share Posted September 12, 2013 well seems like the brakes have finally been stabilized!!!! 2 Quote Link to comment
Busta Nut Posted September 12, 2013 Report Share Posted September 12, 2013 :thumbup: Quote Link to comment
Eagle_Adam Posted September 15, 2013 Author Report Share Posted September 15, 2013 Picked up a know running DE from a 240 with harness, ecu, 5speed, full exhaust and header!!!! 1 Quote Link to comment
Janksun Posted September 15, 2013 Report Share Posted September 15, 2013 Picked up a know running DE from a 240 with harness, ecu, 5speed, full exhaust and header!!!! Thought you already had a KA? Quote Link to comment
Eagle_Adam Posted September 15, 2013 Author Report Share Posted September 15, 2013 I do...... But I just can help myself and this one is a known runner Quote Link to comment
mrbigtanker Posted September 15, 2013 Report Share Posted September 15, 2013 The last couple days have consisted of cleaning and organizing..... Yawn But with a few new shelves and some organizers BAM! Picked up a bolt/nut organizer with removeable containers And jessi got me two long over due tools...... :D Is that you Adam flipping me the bird.lol Quote Link to comment
mrbigtanker Posted September 15, 2013 Report Share Posted September 15, 2013 Picked up a know running DE from a 240 with harness, ecu, 5speed, full exhaust and header!!!! Another KA swap.Right on is this another truck or the same one you had all along?And i want that kermit the frog sticker. Quote Link to comment
Eagle_Adam Posted September 15, 2013 Author Report Share Posted September 15, 2013 Is that you Adam flipping me the bird.lol Naw that's Draynor flipping u the bird, I'm behind the camera 1 Quote Link to comment
Eagle_Adam Posted September 15, 2013 Author Report Share Posted September 15, 2013 Another KA swap.Right on is this another truck or the same one you had all along?And i want that kermit the frog sticker.This is the same truck with the green titans I just couldnt pass up the deal. $300 + gas and Time for a complete running swap is unheard of 2 Quote Link to comment
Tristin Posted September 15, 2013 Report Share Posted September 15, 2013 Damn, thats a really good deal. Hell, twice that would be a good deal... Im jealous now that Im considering a low-key DE swap for mine. Quote Link to comment
Eagle_Adam Posted September 15, 2013 Author Report Share Posted September 15, 2013 You haven't even put one of the two L motors u bought in and now it's a DE swap..... Lolz 3 Quote Link to comment
Tristin Posted September 15, 2013 Report Share Posted September 15, 2013 Im not doing it right now lol... baby steps. Quote Link to comment
Janksun Posted September 15, 2013 Report Share Posted September 15, 2013 Selling the other motor? Quote Link to comment
Eagle_Adam Posted September 16, 2013 Author Report Share Posted September 16, 2013 I have plans for the other motor, it will be going to my friend that hooked me up with this deal. Quote Link to comment
jrock4224 Posted September 16, 2013 Report Share Posted September 16, 2013 You haven't even put one of the two L motors u bought in and now it's a DE swap..... Lolz ahhhh burn!!!!!! jesus mate dohc wow sweet....send me a parts to make green .....I got one here but if I pull parts and send them to u for a swap mr big tanker will flip da fuc out....that dewalt impact is a gem .... I use dafuq out of mine Quote Link to comment
Eagle_Adam Posted September 16, 2013 Author Report Share Posted September 16, 2013 thanx Jrock, ill have a list of parts to be done up in green after i tear it apart for new gaskets! and that dewalt.... OMFG.... and oil pan with that is like cake and 1/3 the time........ Quote Link to comment
jrock4224 Posted September 16, 2013 Report Share Posted September 16, 2013 careful on front cover and valve cover ..... will pull aluminum heads out with ease... Quote Link to comment
Eagle_Adam Posted September 16, 2013 Author Report Share Posted September 16, 2013 careful on front cover and valve cover ..... will pull aluminum heads out with ease... huh? Quote Link to comment
jrock4224 Posted September 16, 2013 Report Share Posted September 16, 2013 impact to 10 mm valve bolts or the front cover......rat tat tat will be too late it will yank the threads right out of anything aluminum ....I.e head or front cover bolts like water pump or necks ......fuck it will rip tht e threads of out of the cast block if u try hard enough... Quote Link to comment
Busta Nut Posted September 16, 2013 Report Share Posted September 16, 2013 This is the same truck with the green titans I just couldnt pass up the deal. $300 + gas and Time for a complete running swap is unheard of You......... ............bastard. Quote Link to comment
Eagle_Adam Posted September 16, 2013 Author Report Share Posted September 16, 2013 impact to 10 mm vaclver bolts or the front cover......rat tat tat will be too late it will yank the threads right out of anything aluminum ....Ie head or front cover bolts like water pump or necks ......fuck it will rip tht e threads of out of the cast block if u try hard enough... gotcha, :D Quote Link to comment
Eagle_Adam Posted September 16, 2013 Author Report Share Posted September 16, 2013 You......... ............bastard. ya, ur not the first one to call me names either :P Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.