Jester Posted July 14, 2009 Author Report Share Posted July 14, 2009 Picking up some D21 spindles from Beebani. :D Should have my dual pot calipers mounted up front real soon. I'll update the pics when I get them on. Quote Link to comment
BEEBANI Posted July 14, 2009 Report Share Posted July 14, 2009 There are only two rings really. The inner left and the outer right are the same and the inner right and outer left are the same. ;) Guys, I'll look through my stash of parts, but I think I might have a few rings. They might be from a 521 though, are they the same? Quote Link to comment
DatDoug Posted July 14, 2009 Report Share Posted July 14, 2009 Truck looks Bad-Ass!:cool: I love the tailgate and the tail pipe (guess I just love tail:blink:) I'd lose the stripes tho and paint the grille black or charcoal. Thats just my 2 cents. Awesome truck:D I also like the contrast when the gas door is open and the interior too. Quote Link to comment
Jester Posted July 14, 2009 Author Report Share Posted July 14, 2009 Thanks guys. The side stripes are going to get a thin stripe of Silver on either side of the Orange. Just as a boarder. Quote Link to comment
DatDoug Posted July 15, 2009 Report Share Posted July 15, 2009 Thanks guys. The side stripes are going to get a thin stripe of Silver on either side of the Orange. Just as a boarder. That will look good. Tone her down a bit:D Quote Link to comment
Jester Posted July 25, 2009 Author Report Share Posted July 25, 2009 ...can we get a couple more pics of under hood I knew there was a couple I forgot to load. I was loading some other photos today and found these two. I chose to use an early model 620 brake booster with my dual SU's. I am concidering the thought of a T3 or T4 draw through which would allow me to go back to the later model. :D I like the idea of a Nissan Turbo diesel too. That would be cool in a 620 KC.:cool::cool: Quote Link to comment
cody Posted July 27, 2009 Report Share Posted July 27, 2009 while at jesters we went to the bank and a snap a couple pics.. First time really using this cam and its slow.. so i couldnt snap the one were jes had his face out the rear window with his tounge stickin out.. :P woulda made a great pic tho.. Quote Link to comment
cody Posted July 27, 2009 Report Share Posted July 27, 2009 Sucks i didnt get to snap that shot of you jes.. lmao Quote Link to comment
78kingcab Posted August 13, 2009 Report Share Posted August 13, 2009 I knew there was a couple I forgot to load. I was loading some other photos today and found these two. this is a awsome pic....makes me want to get r done.....your truck looked sweet at blue lake...... Quote Link to comment
Jester Posted August 13, 2009 Author Report Share Posted August 13, 2009 Thanks, I appreciate that. There is a some stuff I would like to redo, but, it looks good. Loved your truck as well. The quality of work on the body was VERY good. I want to shave my handles now. I'm thinking of running making mine a remote mounted latch with a cable setup. It just scares the heck out of me to think of loosing power and not being able to get in. That and I liked the color as well. Was that a "special blend" of primer or is that a flat paint color? Quote Link to comment
78kingcab Posted August 15, 2009 Report Share Posted August 15, 2009 my s10 has a back up door popper so if battery goes dead so there are things you can do plus the bullit door is the easyest truck to get into..:mad: anyway the (primer) is a catelist with a tint that i get at bobs paint land...gettn ready to spray a all orange one...i send ya a pic of how it turns out Quote Link to comment
Jester Posted August 16, 2009 Author Report Share Posted August 16, 2009 I was thinking Ratsun yesturday and think I am going to use a 620 hood release handle and cable setup mounted under the front fenders up against the firewall for my "access". ALL DATSUN!! :cool: Quote Link to comment
78kingcab Posted August 16, 2009 Report Share Posted August 16, 2009 I was thinking Ratsun yesturday and think I am going to use a 620 hood release handle and cable setup mounted under the front fenders up against the firewall for my "access". ALL DATSUN!! :cool: very nice....mine is in (a) window and i touch a magnet to it and it pops open...can get the set up at radio shack Quote Link to comment
sick620 Posted September 14, 2009 Report Share Posted September 14, 2009 your truck is fucking sexy. it inspires me! Quote Link to comment
Jester Posted September 15, 2009 Author Report Share Posted September 15, 2009 :blush: Thanks man. I have done a few things lately, but, my computer isn't letting me see my pictures. Just white spaces where pictures onece were. Quote Link to comment
72240z Posted November 21, 2009 Report Share Posted November 21, 2009 Have you tried them on another computer? Or to try opening them with a different program? Quote Link to comment
Jester Posted November 21, 2009 Author Report Share Posted November 21, 2009 My Kodak easy share will not allow me to see my pictures through that program. I can't even load new pics. That's why I haven't updated anything. Trying to work with the idiots at Kodak to get it figured out. I'm about to visit their head quarters with a bazooka and see if that will get their attention. Quote Link to comment
72240z Posted November 21, 2009 Report Share Posted November 21, 2009 Oh, I would try a different program then. If it's to open the file itself try the windows pic viewer. If it's getting the pics out of the camera manually go into it though my computer. Quote Link to comment
Jester Posted November 21, 2009 Author Report Share Posted November 21, 2009 I didn't even know you could do that. I'll try that. THANKS! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.