datrod Posted February 1, 2012 Report Share Posted February 1, 2012 Yeah that's the one. The short bus!!!!! :lol: Quote Link to comment
goes2fast Posted February 2, 2012 Report Share Posted February 2, 2012 We could work something out. OK, If you can do it, put me down for 2.:D Quote Link to comment
lil89ram50 Posted March 5, 2012 Report Share Posted March 5, 2012 any update on this? i would really like one of these still. perferably an orange or green one with the 4 speed shift pattern, or rat n wrenches..... Quote Link to comment
Skib Posted March 5, 2012 Report Share Posted March 5, 2012 word. deff want one for the KA trans :cool: Quote Link to comment
cl72wagon Posted March 5, 2012 Author Report Share Posted March 5, 2012 any update on this? i would really like one of these still. perferably an orange or green one with the 4 speed shift pattern, or rat n wrenches..... Well after getting a bunch of excuses, the shop will have them done on wednesday... So that being said I will try to get them out this week for coat, but that is doubtful. The company I am going to use is in oregon. I think they only drive up on mondays and wednesdays. So they will most likely go out to coat next week. Then all I have to do is engrave them...... I will post up when they are ready for sale. Quote Link to comment
Skib Posted March 5, 2012 Report Share Posted March 5, 2012 Well after getting a bunch of excuses, the shop will have them done on wednesday... So that being said I will try to get them out this week for coat, but that is doubtful. The company I am going to use is in oregon. I think they only drive up on mondays and wednesdays. So they will most likely go out to coat next week. Then all I have to do is engrave them...... I will post up when they are ready for sale. Id love a black one with rat and wrenches with KA threads if youl have one :D Quote Link to comment
cl72wagon Posted March 5, 2012 Author Report Share Posted March 5, 2012 Id love a black one with rat and wrenches with KA threads if youl have one :D I dont know what threads the KA trans has....... Let me know and I can re drill and tap it. Quote Link to comment
lil89ram50 Posted March 5, 2012 Report Share Posted March 5, 2012 what colors are you doing? still anodizing them? Quote Link to comment
cl72wagon Posted March 5, 2012 Author Report Share Posted March 5, 2012 what colors are you doing? still anodizing them? Yes they will be anodized, the colors are Red,Green,Blue,Black,Orange. Quote Link to comment
]2eDeYe Posted March 5, 2012 Report Share Posted March 5, 2012 I dont know what threads the KA trans has....... Let me know and I can re drill and tap it. Same thread you had to do for my red one ;) Quote Link to comment
cl72wagon Posted March 5, 2012 Author Report Share Posted March 5, 2012 2eDeYe' date='05 March 2012 - 12:34 PM' timestamp='1330979669' post='648353']Same thread you had to do for my red one ;) ok, then its M10 x 1.25..... Quote Link to comment
datrod Posted March 6, 2012 Report Share Posted March 6, 2012 So what's the ETA on these knobs? Quote Link to comment
sedition88 Posted March 6, 2012 Report Share Posted March 6, 2012 Put me down for a Black one with the Rat & Wrenches and 620 threads Quote Link to comment
DatDoug Posted March 6, 2012 Report Share Posted March 6, 2012 Put me down for a Black one with the Rat & Wrenches and 620 threads Ditto for my Datto :cool: Quote Link to comment
cl72wagon Posted March 6, 2012 Author Report Share Posted March 6, 2012 So what's the ETA on these knobs? The end of next week. I will get them coated, then i have to engrave them. Will do that not this friday but the following. Quote Link to comment
izzo Posted March 6, 2012 Report Share Posted March 6, 2012 What all is possible here? Can i get one with no powder coating, just the billet with ST engraved in it? hoping the same font as in this pic or close to it anyways. Quote Link to comment
goes2fast Posted March 9, 2012 Report Share Posted March 9, 2012 We could work something out. Don't forget me! :P Quote Link to comment
cl72wagon Posted March 10, 2012 Author Report Share Posted March 10, 2012 Don't forget me! :P I wont.... Quote Link to comment
cl72wagon Posted March 10, 2012 Author Report Share Posted March 10, 2012 What all is possible here? Can i get one with no powder coating, just the billet with ST engraved in it? hoping the same font as in this pic or close to it anyways. Po Laser engraving on bare alum does'nt work real well..... Ihave tried it a few times with mixed results. Another way is get it gray anodized,then engrave it. I will see if I can get a sample next week. Quote Link to comment
lil89ram50 Posted March 16, 2012 Report Share Posted March 16, 2012 bump bump. any updates yet? Quote Link to comment
Hardwyre Posted March 16, 2012 Report Share Posted March 16, 2012 Laser engraving on bare alum does'nt work real well..... Ihave tried it a few times with mixed results. Another way is get it gray anodized,then engrave it. I will see if I can get a sample next week. Drag or bit engraving possible? Quote Link to comment
cl72wagon Posted March 17, 2012 Author Report Share Posted March 17, 2012 Drag or bit engraving possible? I am not doing that at this time. All the machines run 3 shifts.... No time to get on them Quote Link to comment
cl72wagon Posted March 17, 2012 Author Report Share Posted March 17, 2012 bump bump. any updates yet? I will get them back on tuesday from ano... Quote Link to comment
Son_of_a_Datsun_Guy Posted March 23, 2012 Report Share Posted March 23, 2012 Friendly neighborhood bump. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.