d510addict Posted February 14, 2011 Report Posted February 14, 2011 I am looking for someone who can fab up a Y pipe for an L16 I havent been able to find one for sale. I will pay cash and would like to help as well so that I can learn a few things. Thank you ~Derick Quote
Skib Posted February 14, 2011 Report Posted February 14, 2011 IIRC NismoDr. had one make for his L16 in his 521. hes local too so it was somewhere close Quote
MikeRL411 Posted February 14, 2011 Report Posted February 14, 2011 Any muffler shop should be able to do this. Whether they are willing is a different question. Quote
Sinnful Posted February 14, 2011 Report Posted February 14, 2011 I might be able to help you with that Quote
d510addict Posted February 14, 2011 Author Report Posted February 14, 2011 Nismo used Eds muffler in milwaukie and I checked with them and they said "its impossible to make, we have them premade for $180" exact words no exageration. They also went on to quote me 480 for a full exhaust from manifold back even though the same job from the same place on the same car was around 200 for Nismo. I'm going to try and go there and get someone else to check it out then I'll head to another shop but it is looking like I will need it made by a private party. Quote
Skib Posted February 14, 2011 Report Posted February 14, 2011 Nismo used Eds muffler in milwaukie and I checked with them and they said "its impossible to make, we have them premade for $180" exact words no exageration. They also went on to quote me 480 for a full exhaust from manifold back even though the same job from the same place on the same car was around 200 for Nismo. I'm going to try and go there and get someone else to check it out then I'll head to another shop but it is looking like I will need it made by a private party. well thats a bunch of crap <_< Quote
Guest DatsuNoob Posted February 14, 2011 Report Posted February 14, 2011 HAHAHA Impossible to make? I could turn one out DRUNK in about 30 to 45 minutes! :lol: Would cost you less than $10 too Quote
d510addict Posted February 14, 2011 Author Report Posted February 14, 2011 ORLY? how wanna make a deal DAT? Quote
bananahamuck Posted February 14, 2011 Report Posted February 14, 2011 There is one nobody bid on last time around relisted on ebay right now..........#310288966988 Oops new # 310290949066 It`s not mine,,,,, just was thinking of buying but didn`t Quote
d510addict Posted February 15, 2011 Author Report Posted February 15, 2011 My only issue with that ebay thing is will the peice fit? I'd almost rather work with somoene on these forums as I have a few things that someone might want not to mention im sure a ratsuner or 2 would like some extra cash. Quote
banzai510(hainz) Posted February 15, 2011 Report Posted February 15, 2011 HAHAHA Impossible to make? I could turn one out DRUNK in about 30 to 45 minutes! Would cost you less than $10 too I would like to get 2 Y pipes then. You make one and post a photo. then I will see if I would want to buy is. MAKE TO A 2INCH COLLECTOR Quote
d510addict Posted February 15, 2011 Author Report Posted February 15, 2011 If this doesn't work out any Portland area Ratsun members know much about modding a tubular header? The truck currently has one but because of its length it blocks the post that the Ebrake uses. Would even consider it as a barter chip for a good condition y pipe with 2 inch collector. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.