athoose Posted April 11, 2010 Report Share Posted April 11, 2010 I need a stator (18 in pic) and magnet (20 in pic). My stator is chewed up and the magnet broke when I tried to separate them. I have paypal http://nissan4u.com/parts/200sx/us_s110/1980_6/type_1/engine_electrical/distributor/illustration_1/ Thanks Link to comment
motavated Posted April 11, 2010 Report Share Posted April 11, 2010 they still sell them at the dealer. Well at least you guy now have a good idea which part it is. Last time I asked was 30$ for #20. Link to comment
motavated Posted April 11, 2010 Report Share Posted April 11, 2010 I have #18 somewheres... I will have it ready by today maybe... Link to comment
banzai510(hainz) Posted April 12, 2010 Report Share Posted April 12, 2010 rockauto.com see what they list there standard motor products??????? Link to comment
banzai510(hainz) Posted April 12, 2010 Report Share Posted April 12, 2010 just get another whole dizzy!!!!!!!!! Link to comment
motavated Posted April 12, 2010 Report Share Posted April 12, 2010 sorry. I could not find it. Link to comment
datzenmike Posted April 12, 2010 Report Share Posted April 12, 2010 18 (stator '79 620) #22163 H9100 about $15 20 (magnet assy. '79 620) # 22158 S6700 about $17 These are the same numbers as used on the '79 S10, '79 A10, '80 720, '80 200sx, (4 plug) '79 B-210, and 310. Link to comment
athoose Posted April 12, 2010 Author Report Share Posted April 12, 2010 rockauto.com see what they list there standard motor products??????? nada just get another whole dizzy!!!!!!!!! I have 70. in my paypal ship me one and it's your's. sorry. I could not find it. Thanks for looking 18 (stator '79 620) #22163 H9100 about $15 20 (magnet assy. '79 620) # 22158 S6700 about $17 These are the same numbers as used on the '79 S10, '79 A10, '80 720, '80 200sx, (4 plug) '79 B-210, and 310. I ordered these online from NissanPartsCC. but was told, eventually, that they were no longer available. I'll try Courtesy. If I order locally the price goes a lot higher. Link to comment
jefe de jefes Posted April 12, 2010 Report Share Posted April 12, 2010 I may have that stuff. I'll check tomorrow Link to comment
ppeters914 Posted April 12, 2010 Report Share Posted April 12, 2010 I ordered these online from NissanPartsCC. but was told, eventually, that they were no longer available. I'll try Courtesy. If I order locally the price goes a lot higher. NissanParts.cc is a crapshoot. If the item isn't green on their website, odds are 50/50 they don't have/can't get it. Don't order until you call 'em first. I only use their website for part number checking/verification. You're better off checking with handful of Datsun-friendly Nissan parts folks: Riley at Lynchburg Nissan in Lynchburg, VA Chad at Chico Nissan Hyundai in Chico, CA B at Campbell-Nelson Nissan in Edmonds, WA There's a few more, but don't know their names locations. Link to comment
jefe de jefes Posted April 15, 2010 Report Share Posted April 15, 2010 I found those parts if you still need them. Check your pm's.... Link to comment
athoose Posted April 15, 2010 Author Report Share Posted April 15, 2010 I found those parts if you still need them. Check your pm's.... Tried to reply to your PM but my browser is having issues, not sure if it went out. Anyway, sweet! I'll take the stator as well if you have it. How much, Paypal address. Thanks Man! Link to comment
athoose Posted April 15, 2010 Author Report Share Posted April 15, 2010 my fault I'll take the signal rotor (14 in the pic) as well. not a big deal if you dont have it, I can buy that locally. so 18,20 and 14 if you have it Link to comment
jefe de jefes Posted April 15, 2010 Report Share Posted April 15, 2010 Is this what you need professor? Link to comment
athoose Posted April 15, 2010 Author Report Share Posted April 15, 2010 Yes, that is what I need! I can't really see from the photo. As long as 14 and 18 haven't been worn to much from hitting each other due to shaft wobble, I'll take em. Oh and 20, the magnet, should be stuck to 18 don't worry about seperating 18 and 20, I broke the magnet when I tried. To get 14 off just place two flatblades under each side and pry up using the dizzy body for leverage. (i apologize if you know this already). oh and I should change my occupation, I was an adjunct professor and the university I worked at had to make massive cutbacks. Now I am a parking lot attendant for them in a place that sees little traffic. I read and draw all day. I am painter. my website http://www.robertigoe.com/ Link to comment
jefe de jefes Posted April 16, 2010 Report Share Posted April 16, 2010 Sent a message to the email listed on your web site. Nice portraits. Link to comment
Recommended Posts