mklotz70 Posted June 3, 2009 Report Share Posted June 3, 2009 (edited) I wouldn't mind selling some of this stuff before Canby so I don't have to haul it down there. Some of the smaller stuff, I might be willing to ship....but I'd rather sell it at Canby than have to mess with shipping. I'm pretty much clearing out anything that's not for my projects. I've got a lot of stuff that I was going to cleanup/modify to sell (like shortening the stock 510 struts), but I'm planning on focusing on just my stuff for awhile(maybe years) and want/need my space back :) Shipping, holding until Canby....all will be on a case by case basis....so pm me to work out details. 13" '64? Roadster rims $5/pr front two...one behind them is an oddball. Tires come with them, but I would consider them unuseable except for rolling around a parts car. One holds air, the other has a screw in it. Wagon exh $40. I actually drove to Vanc to get this....was supposed to be all new pipe...blah, blah....had extra $'s at the time...was feeling generous....paid the $50, still can't figure out why....especially since I don't like glass packs! :( The best thing it has going for it is the down pipe which still has the lips on it. These lips are what keeps it from blowing out gaskets all the time. Down pipe alone....still same price...but much easier to carry :) '72 510 struts $20/pr I've never taken them apart and I don't remember if they passed the bounce test in the car. I was going to shorten them and sell them, but not now. Fender lip off a wgn, pass side $20 '72 air vent $10 Wgn rocker panels $60/pr Wgn Rocker panels...different set $60/pr Edited June 3, 2009 by mklotz70 Link to comment
mklotz70 Posted June 3, 2009 Author Report Share Posted June 3, 2009 '72ish wgn doors $20 hatch, $10 rear(no glass), $15 front(w/glass) Wagon back seat $10 521 tailgate $10(if only for the handles) if no interest in this one, I'll probably pull the handles...I'm not hauling it to Canby unless it's sold. '72 battery tray $5 Wagon rear valence $20 I'm sure I'm gonna regret getting rid of this one if/when I get rearended! Link to comment
sssr20det510 Posted June 3, 2009 Report Share Posted June 3, 2009 if you bring the crossmember to canby ill buy it need a couple to make sr ones out of so i can just swap people out or if your coming to the meet and greet this saturday i can buy it than Link to comment
mklotz70 Posted June 3, 2009 Author Report Share Posted June 3, 2009 Wagon rear tail/fender $50 I started to separate the inside and outside, then figured why bother. Wagon vaper canister. $5 These didn't come on the '68's(or '69's?) Not many guys are looking to put emissions stuff back into their rigs. This is another tank, separate from the one in the pics above. Link to comment
mklotz70 Posted June 3, 2009 Author Report Share Posted June 3, 2009 521 door skins $10/ea I've been saving these to cut out patch panels for shaved doors.....but the two 521's we have will not be getting that done to them. I'll probably only sell two. 520/521 sway bar $5 320 volt reg $5 No clue if it works. I was going to run it for looks along with the internally reg'd alt....just tape wires into the harness for looks :) '64 E1 carb/mani $50 came off the original motor in my NL. Appears to be complete. I've never run gas through it, just starting fluid down it :) Link to comment
mklotz70 Posted June 3, 2009 Author Report Share Posted June 3, 2009 '70ish radio bezel, uncut $40 I hear these are getting really hard to find so I'm tempted to ebay it(read "won't budge on price") :) Link to comment
hang_510 Posted June 3, 2009 Report Share Posted June 3, 2009 '72ish wgn ... $20 hatch interested in the hatch (AFTER i can view the pix)- assuming ill have the 4runner to haul it home... is it clean? (no rot/rust?) Link to comment
mklotz70 Posted June 3, 2009 Author Report Share Posted June 3, 2009 let me know after you view it. It's got some dents in it. I don't recall any rot, but I didn't look too closely. I figured someone would get it for the glass/molding/latch/door pull. It came off A100addict's driver, so I don't think the window seal was leaking. And if somebody wants just that stuff, they can come pull it and leave the door. I'm guessing you can check the pics after work? PM me ya or nay when you do. I'm trying to be a lot less hardcore selling stuff this time.....but I don't plan on holding stuff without it being paypal'd. Sorry, but I've had too many promises from guys to buy stuff and then they don't follow through and I have to start over again. The trap for me is that if I take a paypal or hold something and they don't show up at Canby.....I miss out on being able to sell it face to face. On something like the hatch.....if I do the work of hauling it down there for you to pick up and you don't....and I have to haul it home.....I'm keeping the $20 just for the grief! :) So...let's make sure you want it and that you have a rig to haul it. I think it's already behind a pile of stuff outside....but if not, I'll try to get a pic of the bottom side for you. :) Link to comment
hang_510 Posted June 3, 2009 Report Share Posted June 3, 2009 deal. i can also send a check-save 3% (after checking the pix) that should clear by the time im there. its for a friend w/a rotted hatch Link to comment
mklotz70 Posted June 5, 2009 Author Report Share Posted June 5, 2009 struts are sold. Weather has this on hold for a day or so. I also have a set of '87 200sx 5 lug struts that will be going up. Link to comment
mklotz70 Posted June 7, 2009 Author Report Share Posted June 7, 2009 here's that odd ball roadster rim. 13' not sure if the tire holds air $5 Link to comment
mklotz70 Posted June 12, 2009 Author Report Share Posted June 12, 2009 While digging through the boxes......I came across a complete...including the relays, fuse box....wiring harness. It looks like there's a couple of minor mods to it, but it's not hacked up. This is the entire truck!! Eng bay, Dash, and wires to the tail lights. I posted it here since it is something I'll ship. I'm thinking I can squeeze it into the $15 flat rate box....if not and it's more, I'll eat the difference. I will be taking this to Canby and if any one has a serious interest in this, I can post pics a bit later. Link to comment
pl521sss Posted June 12, 2009 Report Share Posted June 12, 2009 Can you ship the volt regulator? Link to comment
mklotz70 Posted June 12, 2009 Author Report Share Posted June 12, 2009 I have another one....but I'm not separating that harness. Link to comment
AZhitman Posted June 12, 2009 Report Share Posted June 12, 2009 Mike - When you get back, I think I'd be interested in the 320 carb. Link to comment
mklotz70 Posted June 12, 2009 Author Report Share Posted June 12, 2009 It's going up at Canby for $50 w/ or w/o the mani......speak now or take your chance it sells :) Link to comment
mklotz70 Posted June 18, 2009 Author Report Share Posted June 18, 2009 Thanks to the guys that bought stuff! Everyone showed up and bought what they said they would!! Thank you!! I still have the wiring harness, rocker panels, radio bezel. A lot of it is gone. I may try to post more pics of smaller stuff that came home, but it may just go back in boxes and get stored for several more years :) Link to comment
bonvo Posted June 18, 2009 Report Share Posted June 18, 2009 still got the battery tray or did that sell Link to comment
mklotz70 Posted June 18, 2009 Author Report Share Posted June 18, 2009 It's still here today. $5 plus shipping Link to comment
mklotz70 Posted June 18, 2009 Author Report Share Posted June 18, 2009 wow....I'm gonna start selling via text msg! Put one out to about 7 guys for a KA 5spd for $20....sold in less than 30 seconds!!!! :) Link to comment
Recommended Posts