Rubberman Posted April 6, 2009 Report Share Posted April 6, 2009 Someone was looking for one of these a while back. NOT MINE. Here's a new one that's on ebay. Says it fits a small truck and gives the dimensions. http://cgi.ebay.com/ebaymotors/NORS-IMPORT-TRUCK-BED-COVER-TOYOTA-DATSUN-M941_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a10Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem300305932993QQitemZ300305932993QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Link to comment
Guest DatsuNoob Posted April 7, 2009 Report Share Posted April 7, 2009 I'd love a fiberglass one, probably just wishful thinking though. Link to comment
Rubberman Posted April 8, 2009 Author Report Share Posted April 8, 2009 I'd love a fiberglass one, probably just wishful thinking though. If you had the time and quite a bit of fiberglass, I don't think it would be that hard to make one. That's if you really wanted one that bad. Take your time to get it straight. Link to comment
datsunfish Posted April 8, 2009 Report Share Posted April 8, 2009 I have a big piece of a motor home rear cap that I had hopes to build a toneau but I kinda botched it up but might break it out this spring and try again.You could use the filon fiberglass skin they use over lightweight foam and aluminum side panels for rv's and glue it to a nice flat piece you build to fit. I dont work with rv's much anymore but I have some hookups if anyone need some ideas. Link to comment
Jekyl.Hyde.Kustoms Posted April 10, 2009 Report Share Posted April 10, 2009 Someone was looking for one of these a while back. NOT MINE. Here's a new one that's on ebay. Says it fits a small truck and gives the dimensions.http://cgi.ebay.com/ebaymotors/NORS-IMPORT-TRUCK-BED-COVER-TOYOTA-DATSUN-M941_W0QQcmdZViewItemQQ_trkparmsZ66Q3a2Q7c65Q3a10Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2ec0Q2em14QQhashZitem300305932993QQitemZ300305932993QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories Would this fit a 620? Link to comment
Rubberman Posted April 10, 2009 Author Report Share Posted April 10, 2009 Slammed, he says it measures 78 by 62, I'm too lazy to go out and measure my bed right now and I can't remember what the 620 measurments are. Link to comment
Guest DatsuNoob Posted April 10, 2009 Report Share Posted April 10, 2009 Std bed is roughly 76"L X 59 5/8"to 60 1/4"W (depending on the shape of your bed :D). Those are outside to outside bed rail measurements. Link to comment
Rubberman Posted April 10, 2009 Author Report Share Posted April 10, 2009 Std bed is roughly 76"L X 59 5/8"to 60 1/4"W (depending on the shape of your bed :D). Those are outside to outside bed rail measurements. Allowing for the over hang all the way around, it looks like it has loops to hook on the hooks on the bed, should fit. Link to comment
Guest DatsuNoob Posted April 11, 2009 Report Share Posted April 11, 2009 Should fit real nice, about 1" overhang all around the perimeter would be perfect. Link to comment
Jekyl.Hyde.Kustoms Posted April 20, 2009 Report Share Posted April 20, 2009 I ended up winning it. Hope it works alright. Link to comment
Javin Posted December 16, 2010 Report Share Posted December 16, 2010 I know this is an old post but how did the cover work out? Any oics? Link to comment
Bleach Posted December 16, 2010 Report Share Posted December 16, 2010 Well, as I'm giving up on ever getting another 620 I will be selling my 620 soft tonneau cover. I've had this thing (new in the box) for many years now. 1 Link to comment
ariascarlos1990 Posted December 16, 2010 Report Share Posted December 16, 2010 How much? Link to comment
pharouh Posted December 16, 2010 Report Share Posted December 16, 2010 Really? Let's see some pics! Link to comment
Bleach Posted December 16, 2010 Report Share Posted December 16, 2010 How much? a lot of $$$ Link to comment
]2eDeYe Posted December 17, 2010 Report Share Posted December 17, 2010 Well, as I'm giving up on ever getting another 620 Blasphemy! Link to comment
Bleach Posted December 17, 2010 Report Share Posted December 17, 2010 negative rep my ass! oh, and I'm selling my 280ZX turbo Link to comment
motavated Posted December 17, 2010 Report Share Posted December 17, 2010 I give you a hundred for it... Link to comment
]2eDeYe Posted December 17, 2010 Report Share Posted December 17, 2010 I don't wanna negative rep your ass...that's dirty... :lol: Link to comment
Bleach Posted January 21, 2011 Report Share Posted January 21, 2011 I give you a hundred for it... edit: (sold!) edit: (sold!) Link to comment
sanitys Posted January 21, 2011 Report Share Posted January 21, 2011 Hardbody ones fit without doing any modification. The ones like this: http://extang.com/docs/blackmax.html Link to comment
Radiant-Designer Posted September 20, 2011 Report Share Posted September 20, 2011 Hardbody ones fit without doing any modification. The ones like this: http://extang.com/docs/blackmax.html Is this true???? I can use any hardbody (6ft) cover. Link to comment
motavated Posted September 20, 2011 Report Share Posted September 20, 2011 Some one at the meet in torrance used a harbody one. He had to flip the hinges to make it work. But noting was modded. I emailed him but never got a response. I hope I see him again... Link to comment
Radiant-Designer Posted September 20, 2011 Report Share Posted September 20, 2011 flipping hinges isnt that bad, and I like the idea of having it not a perm addition to my truck. And its probably a bit cheaper than going full custom too Link to comment
Recommended Posts