dat521gatherer

Welcome. very nice.

I got my door card redone finally. It came out soso with a bubble here and a tear there and with a 6inch repair at the bottom from a donor panel. The first stuff I bought was too thick so i found some white board that worked although I still had to thin out the holes for the clips to fit.

Thanks B2Fresh but I'm not sure my color is on there. I'll post some other b210 pics with my color so I can get an eye for the repaints and non repaints.

Sweet.; Make sure to post some pics of your work. I started to redo mine and got side tracked for a long time with a huge hole in my trunk.

If you still need them I might be able to help. I need to find a big enough piece of paper though. Maybe some christmas wrapping paper.

The valve cover was powder coated thanks to Jrock and I got lucky finding the radiator sitting on the shelf at performance radiator that someone never paid for. Then I sprayed it with some rattle can vht gloss black from O'rielly's.

My summer shades mini bungied to the door handles. Works way better than anything you stick on the inside of the glass.

Thanks Hainz and Osoi. Nothing new at the moment. Just renewed my tabs and waiting for them to come in the mail. Actually I did do a radiator swap putting a original one back in.

Damn. Soon all of the old guard will be gone. Lemmy toured with Randy Rhoads!!!!!!!

Great job. Now I wish I would have saved my cracked up dash.

For reference there are actually two different springs with two different part numbers. If you look at the pic I posted the only difference is the orientation of the end hooks. The used one on the top has the correct orientation. In the future try part number 30533-76001 which replaces 30533-10600. http://community.ratsun.net/topic/68208-521-clutch-slave-adjustmentspring-replacement/page-2

you can still get them at the dealer. I'll get some numbers for you.

got new bumper lights too.

My 210 at Canby 2015. I hope to take the b210 next year.

A bump with pics before the year ends considering I haven't posted since may. Here are some proper before and after pics. I now have 2800 miles on it.

Does anyone know what the color code for this 75 b210 is? My sticker is gone.

I can't see the pics....

Damn. Very nice.

There are way too many.

Nice

The whole assembly pops out with four screws and the two heater hoses removed. Vent hoses and vent lever and a couple wires.

The best way is to remove the core and stick a wooden dowel in through the inlet/outlet and tap it out. The brass will break very easy if your prying with pliers. Yeah don't forget to remove the very tiny screw.