motavated

PENDING?

Cool story bro!

Still looking.

I have a w58 peanut...... I will sell it what it cost me 65 plus ship. Or trade for a open chamber head...

This is what I found on the accel motor oil on walmart... http://www.chevelles.com/forums/archive/index.php/t-156621.html "This is old news,i did later test that walmart accell oil approx 3yr back and it had 800ppm zddp when stock mild cams need a minimum of 1200-1300ppm zddp for a normal /longer srv'c life and 800ppm doesnt cut it,esp when perf cams need a little more zddp (depending on cam's perf lvl-lobe design & spring rate being run) for proper/longest srv'c life. Here ya go again,pick your poison/LOL!!!! Scott ================================================== ======== ----------------------------------------------------------------------------------------------------------------------------------------- 4) OIL THAT'S GREAT FOR HIGH PERFORMANCE FLAT TAPPET CAM PROTECTION POST BREAKIN . THIS OIL IS ALSO GOOD FOR BREAKIN OF HIGH PERF FLAT TAPPET CAM'S WHEN USED WITH PROPER OIL ADDITIVE LIKE GM EOS OR LUCAS TB ZINC MENTIONED ABOVE. SUMMIT'S NEW (SPECTRO RE-PKG) CONVENTIONAL HIGH PERF FLAT TAPPET CAM OIL WITH 1,800PPM ZDDP LINK TO SPECTRO MOTORGUARD OIL FOR FT CAM/LIFTERS http://goldenmotorguard.com/cart/index.php?main_page=products_all * SUM-MGSAE30 (USE WITH OIL ADDITIVE LISTED ABOVE FOR BREAKIN BUT POST BREAKIN THIS OIL CAN BE USED ALONE WITH NO ADDITIVE TO PROTECT ANY HIGH PERF FLAT TAPPET CAM ) * SUM-MG10W40 (USE WITH OIL ADDITIVE LISTED ABOVE FOR BREAKIN BUT POST BREAKIN THIS OIL CAN BE USED ALONE WITH NO ADDITIVE TO PROTECT ANY HIGH PERF FLAT TAPPET CAM) * SUM-MG20W50 (USE WITH OIL ADDITIVE LISTED ABOVE FOR BREAKIN BUT POST BREAKIN THIS OIL CAN BE USED ALONE WITH NO ADDITIVE TO PROTECT ANY HIGH PERF FLAT TAPPET CAM) NOTE,THE ABOVE OIL IS ALSO AVAIL IN SEMI BLEND ,SEE SUMMITS SITE FOR DETAILS/PT#'S. ================================================== =========================== 5) ADDITIONAL OIL WITH PROPER ZDDP LVLS FOR FT CAM PROTECTION SOME AVAIL AT STORES WHERE NOTED BUT OTHERS ARE AVAIL ON PERSPECTIVE WEBSITES * SPECTRO MOTORGUARD SERIES OIL SPECIFICALLY MFG'D FOR FT CAM'D MOTORS,SAME AS SUMMITS NEW HI PERF OIL FOR FT CAM'D MOTORS. * CEN-PE-CO * JOE GIBBS HOT ROD OIL * MOTOR HEAD HI " Z " OIL * CLASSIC CAR OIL * VALVOLINES VR1 RACE OIL (AVAIL AT MOST AUTOZONE-AUTO STORES IN GENERAL) (HAS PROPER DETERGENT LVL FOR STREET) * CHEVRON DELO LE 15W-40 (AVAIL AT MOST STORES/HAS ENOUGH ZINC/PHOS/ZDDP FOR STOCK TO MODERATE LVL PERF CAMS) * CAM2 RACE OIL * REDLINE RACE OIL (HAS LOWER DET LVL SO NEEDS MORE FREQUENT OIL CHANGE FOR STREET USE) * ROYAL PURPLE RACE OIL (CK ZDDP LVL BEFORE BUYING,NOT ALL GRADES HAVE AMPLE ZDDP) * BRAD PENN RACE OIL * PENNZOIL 25W-50 GT RACE OIL ============================================= 6)OIL ADDITIVES TO BE USED WITH SM RATED MOTORS OIL NOT HAVING ENOUGH ZDDP WHEN RUNNING FT CAMS. THEY AVAIL ON THIER PERSPECTIVE SITES AND SOME STORES LIKE SUMMIT/JEGS/EASTWOOD * ZDDPLUS * CAMSHIELD * MOTOR HI " Z " ZINC ADDITIVE ============================================= (7)THESE BELOW MENTIONED CAM/LIFTER BREAKIN ADDITIVES CAN BE USED IN A PINCH ALONG WITH SM RATED OIL WITH LOW ZDDP LVL,PT #'S ARE LISTED ABOVE IN THIS NOTE UNDER #2 OIL ADDITIVES FOR FT CAM BREAKIN * GM EOS * CRANE SUPERLUBE BREAKIN CONCENTRATE * LUCAS TB ZINC BREAKIN LUBE"

I saw some oil in Walmart for cars older than 1986 I remember..... would this be a good oil for a datsun? Next time I take some pics...

I got one but I am in Los Angeles. 74 short bed...

Build sheet on them motor mounts!!!! I bought a copy!

Reminds me of a dude in our caravan who almost flipped over his truck over a bee and a noise. It was pretty funny! Lucky he and his 620 survived.

FIA HEAD

Its the one all the way in the right. I NEVER KNEW! Thanks for letting us know about this head.

This is a bad ass L series head.... FIA head

My pops was next to me... He just told me... "OK YOU WON! YOU DON'T WANT TO GET A TICKET AT THAT SPEED!" 120mph

I just high speed raced a 2008 Toyota 4runner. I won only because his governor kicked in. LOL!

What about them 1600 emblems... I want those too!

Still have the truck?

You need some thread locker man... And maybe some open lug nuts. Maybe the bolts be to long and the closed nuts dont make it seat all the way making them come lose????

You going to the moreno valley meet man?

Its going into a 1962 for falcon squire wagon. LOL! Nah one of these...

Yes... yes I do... :)

Pic be comming sooner that later.

Awww man, You should of told me. I WOULD OF TAKEN THEM!

I am going... then off I go to moreno valley. Going to make a day out of this shit. :)