powderfinger Posted February 22, 2023 Report Share Posted February 22, 2023 Vintage Rubber now carries these although they are expensive. Shows out of stock though. These are nearly impossible to find in good condition and this is the first company I have seen that is reproducing them. https://vintagerubber.com/datsun-720-king-cab-side-window-seal-kit/ Quote Link to comment
Thomas Perkins Posted February 23, 2023 Report Share Posted February 23, 2023 I am a member of this Nissan site and this guy has a pair for sale.I asked him about them and I think he said 140 bucks plus shipping,He is in Oregon,he has a lot of 720 parts for sale.https://www.facebook.com/photo/?fbid=737098897784214&set=pcb.1440109820064738 Quote Link to comment
Thomas Perkins Posted February 23, 2023 Report Share Posted February 23, 2023 Here is his Facebook page.https://www.facebook.com/groups/190225185053214/user/100044523315904/ Quote Link to comment
powderfinger Posted April 27, 2023 Author Report Share Posted April 27, 2023 (edited) FYI, I just saw where these are back in stock. Only place I am aware of that carries them. I really want to get some because mine are in really bad shape but $170 is steep. https://vintagerubber.com/datsun-720-king-cab-side-window-seal-kit/ Edited April 27, 2023 by powderfinger Quote Link to comment
bottomwatcher Posted April 28, 2023 Report Share Posted April 28, 2023 That is probably close to oem quality seals. It would depend on the condition of the rest of the truck though whether they are worth it. Quote Link to comment
Thomas Perkins Posted May 16, 2023 Report Share Posted May 16, 2023 (edited) I like to get them from Vintage Rubber.They would cost me 208.75 with taxes and shipping.But they are new.I am going to think on it.I do have a new rubber seal on my back slider.Has anyone here ever bought the side window gaskets from them before.I just tried to sign up with them and it won't let me.I just seen there Facebook page and it says they have these gaskets now,plus I looked at one of Mike's old pages here and someone bought a front windshield gasket and it didn't fit,they said it was made in Thailand,it had there sticker over Thailand's.As you know there rubber doesn't last long.Don't but there windshield washer pump and tank,I did,and it didn't last a year.What is everyone's take on Vintage rubber.Check this out.https://www.facebook.com/search/top?q=vintagerubber.com Edited May 16, 2023 by Thomas Perkins Quote Link to comment
powderfinger Posted May 17, 2023 Author Report Share Posted May 17, 2023 I have a rear sliding window seal from them that seems fine. I installed it last year. 1 Quote Link to comment
Thomas Perkins Posted May 17, 2023 Report Share Posted May 17, 2023 (edited) I got my new slider seal free cause the guy at the paint shop cut the one on their off,and it took awhile before they found a new one.I still have the one that was cut off.Also have a extra back slider if any one needs it.My side seals are cracked but it is not leaking..They were about 85 bucks when Nissan had them. Edited May 17, 2023 by Thomas Perkins Quote Link to comment
Thomas Perkins Posted May 17, 2023 Report Share Posted May 17, 2023 (edited) Here are my window seals.The front is good.It was replaced long ago at a glass shop.Since Powder finger says they will be good.I am ordering them now.So Powder Finger,I hope you are right,they look to be about to fall out of the frame.As I tell my wife.It's only money and no where else to get them.I will be the test dummy for this site and let everyone know how they fit.I am the type that will take a chance. Edited May 17, 2023 by Thomas Perkins Quote Link to comment
butter fingers Posted May 17, 2023 Report Share Posted May 17, 2023 Tommy , you are living on the edge alright ! Nice truck you have sir . butter fingers Quote Link to comment
Thomas Perkins Posted May 17, 2023 Report Share Posted May 17, 2023 My order is in.I paid by Pay Pal and the total is 193.45.They charged 175.00 for the seals and 18.45 for the shipping.It is coming from Riverside California and says 3 day shipping.So Hope it goes good. Quote Link to comment
Thomas Perkins Posted May 17, 2023 Report Share Posted May 17, 2023 Just now, butter fingers said: Tommy , you are living on the edge alright ! Nice truck you have sir . butter fingers 1 minute ago, butter fingers said: Tommy , you are living on the edge alright ! Nice truck you have sir . butter fingers Just now, Thomas Perkins said: My order is in.I paid by Pay Pal and the total is 193.45.They charged 175.00 for the seals and 18.45 for the shipping.It is coming from Riverside California and says 3 day shipping.So Hope it goes good. Just now, Thomas Perkins said: My order is in.I paid by Pay Pal and the total is 193.45.They charged 175.00 for the seals and 18.45 for the shipping.It is coming from Riverside California and says 3 day shipping.So Hope it goes good. 1 minute ago, butter fingers said: Tommy , you are living on the edge alright ! Nice truck you have sir . butter fingers Quote Link to comment
Thomas Perkins Posted May 17, 2023 Report Share Posted May 17, 2023 My Truck just had a Anniversary,I bought it in May 1,1994 and It wanted some seals..Thanks Powderfinger for the link.Thanks Butter fingers...I did call them before I ordered but they said they couldn't get to the phone,leave a message,I did. Quote Link to comment
Thomas Perkins Posted May 17, 2023 Report Share Posted May 17, 2023 I am not sure but this is what I think.You can create a account with Vintage Rubber after you bought something.I tried before I bought something and it would not let me and as I was ordering,it would let me as I paid.So I now have a account with them and they sent me a order number with receipt and a Pay Pal receipt. Quote Link to comment
six2ohyea Posted May 18, 2023 Report Share Posted May 18, 2023 3 hours ago, Thomas Perkins said: My order is in.I paid by Pay Pal and the total is 193.45.They charged 175.00 for the seals and 18.45 for the shipping.It is coming from Riverside California and says 3 day shipping.So Hope it goes good. Are you installing yourself? Quote Link to comment
Thomas Perkins Posted May 18, 2023 Report Share Posted May 18, 2023 Yeah,I am installing them,I did take the side windows out long ago when I remodeled the inside.I took the black carpet out and put dynamite on the floor board then put gray carpet in when I put a new heater core in.The carpet goes under the heater core.I took the back and side panels out and bought new clips from clips and fasteners and painted them .Also got the new clips to hold the long bar that you use to jack the truck up.The door panels and seat belts and stick shift box was changed from black to gray.I have gray carpet on dash.I wanted all the black gone.Got gray seat covers over the black seats.I hate them seats.The jump seats are now gray.I have pics of this but it is on my computer and maybe on my page here.I also have a lap top full of pics but I haven't used it since my dad passed in 10 years.I may go get on it ,it has my pics when I redid the inside.I had the dash apart cause I was putting a new heater core in it Quote Link to comment
powderfinger Posted May 18, 2023 Author Report Share Posted May 18, 2023 Tommy, since you like gray it should be pretty easy to find gray seats out of an older Passport or Rodeo that will fit. That's what I have in mine, I can take a picture if you'd like. I don't remember the year range though but that can easily be found with a search. The key, if you do this, is to swap the seat bases. The passport seats will bolt right in but the back of the seat will be too high which I am sure you have read people on forums complain about. The factory Nissan seat bases will swap onto the passport seats which will correct the angle and almost all of the height issue. They are not the best seats but way better than the factory seats especially if yours isn't an ST. Quote Link to comment
powderfinger Posted May 18, 2023 Author Report Share Posted May 18, 2023 Also, I am real curious how the seals work out. I almost feel bad for not buying them because I emailed them several times around two years ago asking them to start making these lol. I am sure plenty others also inquired about them too, otherwise they never would have made them. My seals are in worse condition than yours. Quote Link to comment
Thomas Perkins Posted May 18, 2023 Report Share Posted May 18, 2023 Yes Powderfinger,send some pics of your seats.Thanks. Quote Link to comment
Thomas Perkins Posted May 18, 2023 Report Share Posted May 18, 2023 I just check the status on the seals and they are on the way here.Your order has shipped via USPS Priority (1-3 Days). Quote Link to comment
720_Jeff Posted May 19, 2023 Report Share Posted May 19, 2023 18 hours ago, powderfinger said: Tommy, since you like gray it should be pretty easy to find gray seats out of an older Passport or Rodeo that will fit. That's what I have in mine, I can take a picture if you'd like. I don't remember the year range though but that can easily be found with a search. The key, if you do this, is to swap the seat bases. The passport seats will bolt right in but the back of the seat will be too high which I am sure you have read people on forums complain about. The factory Nissan seat bases will swap onto the passport seats which will correct the angle and almost all of the height issue. They are not the best seats but way better than the factory seats especially if yours isn't an ST. I did Rodeo seats, think it was 99? It's been a while. They were very comfortable. Near perfect fit. When you both them up, put in rear bolts first, then front. You'll need some washers, especially on the front, as the holes are too large. Once the rear bolts are threaded in, you can put the front bolts in. The front flange? of the seat rail isn't bent for the 720's, but close enough. Thread, and tighten down, that will bend the front flange of the seat rail in and should be fine enough. Quote Link to comment
powderfinger Posted May 19, 2023 Author Report Share Posted May 19, 2023 5 hours ago, 720_Jeff said: The front flange? of the seat rail isn't bent for the 720's, but close enough. If you still have your factory 720 seat rails I highly recommend you swapping those onto your Rodeo seats, You will thank me afterwards. They almost directly bolt up, I think I had to drill either the front or the back holes in the rails just a tad bigger for fitment but it wasn't much at all. Quote Link to comment
720_Jeff Posted May 19, 2023 Report Share Posted May 19, 2023 6 hours ago, powderfinger said: If you still have your factory 720 seat rails I highly recommend you swapping those onto your Rodeo seats, You will thank me afterwards. They almost directly bolt up, I think I had to drill either the front or the back holes in the rails just a tad bigger for fitment but it wasn't much at all. That truck got sold. How does the 720 seat rails help? Just curious, if I do this again. Quote Link to comment
powderfinger Posted May 20, 2023 Author Report Share Posted May 20, 2023 The stock Rodeo rails make the back half of the seat sit quite a bit higher than the factory 720 rails. Causes head to be closer to top of truck and also in my opinion makes the seating angle uncomfortable. Once I put the 720 rails on, the back of the seats sat lower and closer to how the factory 720 seats were angled. Quote Link to comment
Thomas Perkins Posted May 20, 2023 Report Share Posted May 20, 2023 (edited) They say the seals will be here Monday.I will call a few junk yards and see if they have some Gray Rodeo seats and if they do can they send a picture.The bad thing is.The location of the junk yards.They are located in the bad part of Columbus.Gangs run that part of town.Crime is high in that area.Does anyone know what price I should pay for these seats? Edited May 20, 2023 by Thomas Perkins Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.