tiny Posted August 17, 2021 Report Share Posted August 17, 2021 Body roll is crazy, found a front sway bar from an 87 D21. Compatible? 1 Quote Link to comment
weldingrod Posted August 17, 2021 Report Share Posted August 17, 2021 Scrapping an 81 720 4x4, going to scrappers soon, still has sway bar, in Nanaimo. 1 Quote Link to comment
datzenmike Posted August 17, 2021 Report Share Posted August 17, 2021 The 2wd are the same all years but the 4x4 is a totally different part number. The 4x4 LCA is very different from the 2wd but the bar does look the same. Because its so close to you I would definitely give it a try. 2 Quote Link to comment
tiny Posted August 18, 2021 Author Report Share Posted August 18, 2021 6 hours ago, weldingrod said: Scrapping an 81 720 4x4, going to scrappers soon, still has sway bar, in Nanaimo. Front sway? I'd be happy to pick it up on my way to Tofino this weekend. Message me details 1 Quote Link to comment
tiny Posted August 18, 2021 Author Report Share Posted August 18, 2021 Also looking for a rear diff 1 Quote Link to comment
datzenmike Posted August 18, 2021 Report Share Posted August 18, 2021 2wd 720 and D21s with 4 cylinder were H-190. What ratio? Probably 3.889 Look on the passenger dise inner fender under the hood hinge for the engine plate. Bottom line TRANS/AXLE............. FS5W71B............. HF38 38 is 3889, 41 is 4.11 and so on 1 Quote Link to comment
Charlie69 Posted August 18, 2021 Report Share Posted August 18, 2021 Your ratio like Mike said would be 3.889. To be sure check on the passenger side inner fender. Quote Link to comment
tiny Posted August 18, 2021 Author Report Share Posted August 18, 2021 Thanks guys! 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.