Yellow Posted May 21, 2018 Report Share Posted May 21, 2018 So I recently replaced my blown front shocks with oem shocks, which then blew out within a week. I have cut the bump stops and cranked the tortion bars down in the front. Its maybe 3 1/2" to 4" lower total, not quite resting on whats left of the bump stops. Does anyone have any idea what size shock I need to stop blowing them out? 1 Quote Link to comment
hobospyder Posted May 21, 2018 Report Share Posted May 21, 2018 Pinto shocks. People have used them for the lowered trucks 2 Quote Link to comment
datzenmike Posted May 21, 2018 Report Share Posted May 21, 2018 Or modify the top shock mount higher by an inch. Then you can run good truck shocks. 1 Quote Link to comment
banzai510(hainz) Posted May 21, 2018 Report Share Posted May 21, 2018 I bought KYB Gas A Just and have the bump stop out and lowered close to the end of the threads on the torsion adjustment. they are still good over 10yrs now there is also a another KYB red ones that are more expensive Mono Max maybe raise fron up a 1/2 inch might help 1 Quote Link to comment
G-Duax Posted May 21, 2018 Report Share Posted May 21, 2018 I have a new set of KYB GR-2 gas shocks that I bought, but then found a Bilstein set... Make you a hell of a deal on them... Never used, or even bolted on. 2 Quote Link to comment
Yellow Posted May 21, 2018 Author Report Share Posted May 21, 2018 Thanks guys I'll try out some pinto shocks. 1 Quote Link to comment
Yellow Posted May 21, 2018 Author Report Share Posted May 21, 2018 I have a new set of KYB GR-2 gas shocks that I bought, but then found a Bilstein set... Make you a hell of a deal on them... Never used, or even bolted on. Are they shorter than stock replacments? Might take that offer. 1 Quote Link to comment
G-Duax Posted May 21, 2018 Report Share Posted May 21, 2018 Don't think so....Stock 620 Sorry 1 Quote Link to comment
Yellow Posted May 21, 2018 Author Report Share Posted May 21, 2018 Ah okay thanks anyway 1 Quote Link to comment
Yellow Posted May 25, 2018 Author Report Share Posted May 25, 2018 Pinto shocks. People have used them for the lowered trucks Just installed a set today. They work great! 2 Quote Link to comment
hobospyder Posted May 25, 2018 Report Share Posted May 25, 2018 My memory proved useful than Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.