JesseR Posted September 23, 2017 Report Share Posted September 23, 2017 I finally got around to removing the stock exhaust and upgrade to something a little more unique. I went all new from the manifold flange, 2.25 pipe routed high and tight to a Magnaflow 14210 muffler. The downpipe was routed away from the engine and located between the torsion bar and frame. This muffler is for the Mustang with the side exit and is unique because the inlet and the outlet are on the same end. This allowed the outlet from the muffler to be routed over the frame rail and dump out in front of the back tire. It has a great sound and unique look. Just wanted to share. https://www.amazon.com/photos/share/qYIwJguP3Nv7FOvC4DIgcNy2B6dpW8W5nQZjWADM1tS https://www.amazon.com/photos/share/sPTTG7xcBlGJ5WuyY4ZhDMM81aQsi8ndJiHvOZxiM3v https://www.amazon.com/photos/share/IvlkJqCemj3hdXpbNNQLdQgWfKq2BiazCZZIREiCgog https://www.amazon.com/photos/share/HqJZrNQTl2NwFxoJ8eKfcP5wstLH7bNV8OKBeTAAWAK https://www.amazon.com/photos/share/ih35z8vlC5RM426E1UbWUpcy9dx9HcNZWmaWUSGRFmr The work was done by Rich's Performance Exhaust. Rich did a youtube video of the install that can be seen here: https://youtu.be/viBULWKUw1s 2 Quote Link to comment
G-Duax Posted September 23, 2017 Report Share Posted September 23, 2017 Really ? Did you notice that none of your pictures work ? Try imgur, or someone else besides the ass holes a photobucket. PS. had side exhaust on my 521. Short & sweet. Exited out the right side just in front of the rear wheel. Last strait section angled up, and would blow exhaust right in the face of anyone I was passing. Great fun when picking on pissy ass Honda owners who wanted to street race. 1 Quote Link to comment
JesseR Posted September 23, 2017 Author Report Share Posted September 23, 2017 The photos worked when posted.... Photobucket account has been deleted.... Images have been moved to Amazon but their links do not embed in the forum, I guess if you are interested, click on the link. Would rather be working on the truck than trying to figure out how to get pictures to work. 1 Quote Link to comment
datzenmike Posted September 23, 2017 Report Share Posted September 23, 2017 Really ? Did you notice that none of your pictures work ? Try imgur, or someone else besides the ass holes a photobucket. I won't click on links either because I like working on my Datsuns more. imgur is no more work than Amazon but the difference is they are visible. The system looks nice and best of all it doesn't sound like a honderp. The Can Am Challenger and 'Cuda had mufflers and side exit just like that from the factory. 1 Quote Link to comment
G-Duax Posted September 23, 2017 Report Share Posted September 23, 2017 Not bad. Does it touch the chassis or cab anywhere? Looks kind of close. Also, you are probably going to end up putting a tip on that, as any exhaust I've seen that exits right at the edge of the body will at minimum, soot the paint up, and at worst, actually burn the paint. What was the bill for that job? 1 Quote Link to comment
JesseR Posted September 24, 2017 Author Report Share Posted September 24, 2017 It does not touch anywhere even though it is close. It is, no pun intended, well hung. It does not sound like a rice burner for sure with a nice rich truck tone and a little gurgle on idle down. No tip for me, ruins the look i was going for, the angle everything is cut at should be good on the paint. if it becomes a problem i will add a small patch of protective film above the exit. Muffler was not cheap but it was one of the only options available that allowed the plumbing to go over the rail. it was worth it for a little fun, and a little personality. all said and done it was around 400. I did not have to mess with it and the old muffler had leaks and had to go anyway. 3 Quote Link to comment
Spawn Posted September 25, 2017 Report Share Posted September 25, 2017 JesseR, did you buy all of the parts from Amazon and have Rich's shop install everything, or was this all purchased directly in-house from Rich's Performance Exhaust Quote Link to comment
JesseR Posted September 25, 2017 Author Report Share Posted September 25, 2017 I let Rich do it all in house. Quote Link to comment
G-Duax Posted September 25, 2017 Report Share Posted September 25, 2017 You might ask him if he can duplicate it, without having someone's truck there. I'm sure he could sell a few. Quote Link to comment
2wheel-lee Posted September 26, 2017 Report Share Posted September 26, 2017 I saw the pics on facebook. While the setup looked pretty cool, it was good that the truck wasn't lowered, as the exhaust hung really low. If you're going to tuck an exhaust, tuck it, don't let it hand 3" below the bottom of the truck. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.