Home Built by Jeff Posted October 14, 2017 Author Report Share Posted October 14, 2017 great ideal about the totes Such a simple thing, but makes it sooooo much easier! Quote Link to comment
Home Built by Jeff Posted October 20, 2017 Author Report Share Posted October 20, 2017 This week I stripped down my P90a head to see what I am working with. I also tackled my most difficult rust repairs to date. https://youtu.be/tl9fe8yd1z8 2 Quote Link to comment
Home Built by Jeff Posted October 27, 2017 Author Report Share Posted October 27, 2017 Are my 240Z's doors completely rusted out and junk? They have been covered up with a mountain of bog and paint, so this week I strip them down and see if I can save them. Quote Link to comment
Home Built by Jeff Posted November 4, 2017 Author Report Share Posted November 4, 2017 This week I work away at finishing that terrible door. It is a lot of rust and a lot of work, but I am stubborn enough to keep at it. Quote Link to comment
frank88 Posted November 4, 2017 Report Share Posted November 4, 2017 That dent puller is genius. Really enjoying your datsun videos and looking forward to seeing the Porsche finished 1 Quote Link to comment
Home Built by Jeff Posted November 4, 2017 Author Report Share Posted November 4, 2017 That dent puller is genius. Really enjoying your datsun videos and looking forward to seeing the Porsche finished Thanks mate. Sometimes simple things are the best. I have had a couple of guys who have already shown me the ones they made. One of them, which I posted on my Facebook page, used a hook on the slider. He then welded washers onto the dent and pulled them with the hook. Quote Link to comment
Aaron Datsun Posted November 5, 2017 Report Share Posted November 5, 2017 Subscribed. Look forward to watching. I have some videos of my car (1975 280z) on the YouTube's, and am hopefully picking up a 510 that I will start a video series on that as well. 2 Quote Link to comment
Home Built by Jeff Posted November 10, 2017 Author Report Share Posted November 10, 2017 This week I have been back at it, cutting rust out of these doors. I am quite happy with how the repairs are coming along, but it is so time consuming. 1 Quote Link to comment
Home Built by Jeff Posted November 17, 2017 Author Report Share Posted November 17, 2017 This week I finally finish repairing all of the rust damage on my doors. Getting there slowly. https://youtu.be/fymqcDQDGxI Quote Link to comment
Home Built by Jeff Posted November 24, 2017 Author Report Share Posted November 24, 2017 This week I gave paint stripper another go, and it works much better if it there are not 20 layers of paint and bog. The whole car is almost rust free now, just a couple of small bits to go. Quote Link to comment
mrbigtanker Posted November 24, 2017 Report Share Posted November 24, 2017 Jeff, welcome aboard watched some of your videos and there pretty dam good. You have a beautiful wife who is a keeper, if she tolarates you in the garage and the funny faces she makes while your talking. Keep up the good work and keep it coming. Cheers Mate 1 Quote Link to comment
Home Built by Jeff Posted November 24, 2017 Author Report Share Posted November 24, 2017 Jeff, welcome aboard watched some of your videos and there pretty dam good. You have a beautiful wife who is a keeper, if she tolarates you in the garage and the funny faces she makes while your talking. Keep up the good work and keep it coming. Cheers Mate Thanks mate. I am very lucky having a tolerant wife who puts up with all this, that is for sure. 2 Quote Link to comment
Home Built by Jeff Posted December 1, 2017 Author Report Share Posted December 1, 2017 Back into it after having my 911 build video go viral with over 11 million views in the first 5 days. This week it is time to fit some wheel arch flares to my Z. https://youtu.be/wUU_RbKB0B8 Jeff 1 Quote Link to comment
Aaron Datsun Posted December 2, 2017 Report Share Posted December 2, 2017 I think I am going to steal your format, and bring my wife in, she is way better to look at than me for sure! I have been doing timelapses for a while, but I really like the amount of time you spend explaining and then showing. Keep up the good work! 1 Quote Link to comment
Home Built by Jeff Posted December 2, 2017 Author Report Share Posted December 2, 2017 I think I am going to steal your format, and bring my wife in, she is way better to look at than me for sure! I have been doing timelapses for a while, but I really like the amount of time you spend explaining and then showing. Keep up the good work! That was my same theory. What is your channel? I am always looking for new build channels to watch. Quote Link to comment
Aaron Datsun Posted December 2, 2017 Report Share Posted December 2, 2017 Most of my videos are of me building a Boba Fett costume. However with work over the past couple years I haven't done much on that. I have Datsun videos sprinkled in there as well. https://www.youtube.com/channel/UCwQDvd-3-xoIm43kkpGAS0w 1 Quote Link to comment
Home Built by Jeff Posted December 2, 2017 Author Report Share Posted December 2, 2017 Looks good. It looks like your Z has plenty of go. Nice stuff. Quote Link to comment
Home Built by Jeff Posted December 8, 2017 Author Report Share Posted December 8, 2017 This week I have been fighting with the front end, trying to get all of the parts to fit neatly. Quote Link to comment
Home Built by Jeff Posted December 15, 2017 Author Report Share Posted December 15, 2017 This week I have started to build the roll cage for the Z, but of course in the process I discover more rust.... AAAAaaaarrrghhh!!! https://youtu.be/T0Je59bdHec Quote Link to comment
Home Built by Jeff Posted January 5, 2018 Author Report Share Posted January 5, 2018 Happy New year guys. I have finally got stuck back into the Z. Continuing to work on the roll cage this week. Quote Link to comment
Home Built by Jeff Posted January 12, 2018 Author Report Share Posted January 12, 2018 I am back into the roll cage this week and I finally get it all together. Quote Link to comment
Home Built by Jeff Posted January 19, 2018 Author Report Share Posted January 19, 2018 This week I finally finish the roll cage. I also start aligning all of the panels on the Z getting it ready for paint. https://www.youtube.com/watch?v=Rs8r-OfKO7c&feature=youtu.be Quote Link to comment
Home Built by Jeff Posted January 26, 2018 Author Report Share Posted January 26, 2018 This week I get stuck back into repairing the bonnet and then spend a heap of time trying to get the front bar lined up. 1 Quote Link to comment
frank88 Posted January 27, 2018 Report Share Posted January 27, 2018 The roll cage episodes were great. Haven't seen the latest one but looking forward to it :) 1 Quote Link to comment
Home Built by Jeff Posted February 2, 2018 Author Report Share Posted February 2, 2018 This week I manage to do some home built frame pulling and then I rebuild the spray booth. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.