rollinsrods Posted July 7, 2014 Report Share Posted July 7, 2014 I currently have a 1976 620 that I'm building up. I plan on it being a 4 wheel disc, KA24de 5spd. Would it be best to get a later model 620 with discs up front and a factory 5 speed and build up that frame and swap my cab and bed over after I've done the swaps or should I just build up what I have now? Quote Link to comment
bonvo Posted July 7, 2014 Report Share Posted July 7, 2014 really doesnt matter much but ball joints over kingpins Quote Link to comment
datzenmike Posted July 7, 2014 Report Share Posted July 7, 2014 No sense getting a later 5 speed as you'll be replacing it with the KA 5 speed anyway. The later disc brake 620s are easier to upgrade the front brakes on. I wouldn't worry about the rears. Drums are more than enough and discs are just for show. I don't care for king pins is all. Quote Link to comment
Z-train Posted July 7, 2014 Report Share Posted July 7, 2014 Rear disc' are point-less over drum un-less you are going to "track" the vehicle. Quote Link to comment
heretic Posted July 7, 2014 Report Share Posted July 7, 2014 Jeff did this very thing with his 620. You should PM him & ask his advice/opinion on things he'd do different the second time around. http://community.ratsun.net/topic/55161-throwback-lilhustler/ I currently have a 1976 620 that I'm building up. I plan on it being a 4 wheel disc, KA24de 5spd. Would it be best to get a later model 620 with discs up front and a factory 5 speed and build up that frame and swap my cab and bed over after I've done the swaps or should I just build up what I have now? Quote Link to comment
rollinsrods Posted July 7, 2014 Author Report Share Posted July 7, 2014 Thanks for the link! The rear discs are more for ease in upkeep. Pad swapping and cleaning is a quarter of the effort that shoe swapping, hardware swapping, and cleaning requires. Quote Link to comment
Willdatsun Posted July 7, 2014 Report Share Posted July 7, 2014 Handbrake is usually better and more reliable on drums and drums are better protected from the weather. Shoes also take longer to wear as there is far more surface area than pads have. Main advantage of discs is that they auto adjust for wear, but a few clicks on the starwheels every 6 or 12 months is not hard. I have found however that some alloy wheels do not like the shape of the drums on Datsun trucks, the drums prevent the centre of the wheel contacting the area where the wheel nuts are, which can mean the wheel bends and does not tighten correctly and is potentially dangerous. A thin spacer can help if its only slightly out but you run out of wheel stud and arch clearance if you have to space out too much. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.