stevenzak Posted March 5, 2014 Report Share Posted March 5, 2014 Hello, would a 1981 Datsun pickup rear differential fit on a 1980 Datsun 210? Could I take the pick up trucks axels and third member and fit it on my datsun 210? Would it bolt on and fit without any issues? If not what year and models would fit? Thanks. Quote Link to comment
]2eDeYe Posted March 5, 2014 Report Share Posted March 5, 2014 I don't think the B210 has an H190 like the 720. the 720 rear is also 55ish" wide so it might not even fit under the B and it is 6 lug not 4 lug. :) Quote Link to comment
Lonestar Posted March 5, 2014 Report Share Posted March 5, 2014 It depends on the truck but I'm leaning towards no. The only rears that will bolt into an 1980 210 are the insanely rare H165 80-83 200sx and the beefier H190 which comes from a truck I think. What happen to yours? Quote Link to comment
datzenmike Posted March 5, 2014 Report Share Posted March 5, 2014 Nothing about the 720 rear end will work for the 210. Much too wide. Leaf spring mounts not coils and 4 linc like the 210. Six bolt rims. Forget it. It depends on the truck but I'm leaning towards no. The only rears that will bolt into an 1980 210 are the insanely rare H165 80-83 200sx and the beefier H190 which comes from a truck I think. What happen to yours? Only the '80-'81 S110 (200sx) had the H-165. The '82 and '83 S110 switched to the H-190. Either can be fitted to the 210 and is almost a drop in swap. Almost. 1 Quote Link to comment
CWhip Posted March 5, 2014 Report Share Posted March 5, 2014 I tried to drop a H-165 behind my A15 with a 5 speed and the drive line was too long. Fyi. Quote Link to comment
ggzilla Posted March 5, 2014 Report Share Posted March 5, 2014 That's right. H165 is not a bolt-in. B310 comes with H150. However the 1980-1981 200SX rear axle assembly is an almost bolt-in for a B310. Quote Link to comment
stevenzak Posted March 5, 2014 Author Report Share Posted March 5, 2014 ok thanks a lot guys. I was just thinking to upgrade the rear end. I was thinking of making a engine swap later on, but I guess ill keep it original. Quote Link to comment
datzenmike Posted March 5, 2014 Report Share Posted March 5, 2014 Only the '80-'81 S110 (200sx) had the H-165. The '82 and '83 S110 switched to the H-190. Either can be fitted to the 210 and is almost a drop in swap. Almost. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.