q-tip Posted June 20, 2013 Report Share Posted June 20, 2013 I've been helping pumpkn Dave with the motor swap on the maxima and we hit a snag last night. We are using the L28 from a zx to replace the L24 that is sun blowed up. The zx is rear sump and the maxima is front, just change the pick ups right....nope, there are 2 spots for the oil pick up tube to bolt to. The question is can we take the front cross member and steering rack from a zx and bolt it into the maxima to use the rear sump pan? Quote Link to comment
Z-train Posted June 20, 2013 Report Share Posted June 20, 2013 No.The right way is fab a pick-up tube that will work with the front sump pan. 2 Quote Link to comment
blue72 Posted June 20, 2013 Report Share Posted June 20, 2013 Or... drill the front oil pickup through to the oil galley, tap the pickup mounting holes and plug the (now unused) rear oil pickup. Quote Link to comment
Z-train Posted June 20, 2013 Report Share Posted June 20, 2013 Or... drill the front oil pickup through to the oil galley, tap the pickup mounting holes and plug the (now unused) rear oil pickup.While this is an alternative,it will only work if the motor is apart for a rebuild. Quote Link to comment
q-tip Posted June 20, 2013 Author Report Share Posted June 20, 2013 Well, the pan is off but that's all the more torn down we are going to go with it, thus the possibility of making it rear sump with a different cross memeber Quote Link to comment
Tristin Posted June 20, 2013 Report Share Posted June 20, 2013 Well, the pan is off but that's all the more torn down we are going to go with it, thus the possibility of making it rear sump with a different cross memeber Can the cross member not be cut and flipped? Ive never seen a Maxi version. Quote Link to comment
q-tip Posted June 20, 2013 Author Report Share Posted June 20, 2013 It has a power rack and pinion that would be in the way aswell Quote Link to comment
Tristin Posted June 20, 2013 Report Share Posted June 20, 2013 Oh shit... yeah, I thought it was manual. Quote Link to comment
RedBanner Posted June 20, 2013 Report Share Posted June 20, 2013 Stainless hose to remote pickup? Quote Link to comment
blue72 Posted June 20, 2013 Report Share Posted June 20, 2013 I had the opposite problem when I first bought my Z. Previous owner had swapped in a Maxima L24E and kept the rear sump Z car pan. Their kludged together solution was to hacksaw the oil pickup tube in half and extend it with some rubber hose & two hose clamps so that it reached the rear of the pan. I think they even went so far as to make a tiny little bracket to help hold up the middle of the rubber hose. I actually drove it for a few thousand mile like that without knowing a thing about it. Quote Link to comment
q-tip Posted June 20, 2013 Author Report Share Posted June 20, 2013 To make it the right way it is almost the exact opposite bend that it already is Quote Link to comment
q-tip Posted June 21, 2013 Author Report Share Posted June 21, 2013 So back the question..... Can a 280zx front crossmemeber be put into a 1st gen maxima? Quote Link to comment
Z-train Posted June 21, 2013 Report Share Posted June 21, 2013 ANything can be done with time & money.The easiest is to cut & splice the existing pick-up. Quote Link to comment
q-tip Posted June 21, 2013 Author Report Share Posted June 21, 2013 That's what we are going to end up doing, but it would save some fan time to just swap some parts Quote Link to comment
BJW's FiveTen's Posted June 22, 2013 Report Share Posted June 22, 2013 I have a 280zx front x member here at the house if you guys want it. IIRC the zzz were not r&p tho. Quote Link to comment
q-tip Posted June 23, 2013 Author Report Share Posted June 23, 2013 That's what I thought, Dave got a pick up tube made so we can just do that 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.