DMC Posted March 29, 2013 Report Share Posted March 29, 2013 No build, no teardown,,,make it go and stop, and.maybe some lights. someday ill figure out how to post pics. 1 Quote Link to comment
wayno Posted March 29, 2013 Report Share Posted March 29, 2013 It's photolame, can't do anything with that lame site anymore, otherwise I would post the photo for you. Welcome to Ratsun B) Quote Link to comment
Tristin Posted March 29, 2013 Report Share Posted March 29, 2013 Your picture is sideways, but here: Quote Link to comment
DMC Posted March 29, 2013 Author Report Share Posted March 29, 2013 oh Wayno :ninja: you know Tater! I have the starter installed, drained the old gas, changed the oil, pulled the plugs and cranked him over. Got sparky at the points ,,,so you know whats next. Quote Link to comment
DMC Posted March 29, 2013 Author Report Share Posted March 29, 2013 Thanks Tristin, You may remember this from ANM last year, I think you took some really great pics of my car. (the end item of course) Quote Link to comment
wayno Posted March 29, 2013 Report Share Posted March 29, 2013 oh Wayno :ninja: you know Tater! I have the starter installed, drained the old gas, changed the oil, pulled the plugs and cranked him over. Got sparky at the points ,,,so you know whats next. OK, I actually owned this for a while, hmmmm. Did you pour a little gas down the carb, did it try to hit? I never got that far, just to many things going on at the same time back then, plus I would have taken a bunch of shit if I would have done what I planned to it. That is a good plan, get it running and dependably driving, you know, it should start, stop, and be steerable, then figure out what way you want to go. There is a lot of NL320s up there in that area now, lets get them all to Canby some year and park them together. Quote Link to comment
DMC Posted March 29, 2013 Author Report Share Posted March 29, 2013 It's been inside since the day I brought it home. I have not tried to fire it yet,,,, I will soon. Thanks for letting it go. needs a little floor patch around the seat mount before it gets hard miles. A caravan to canby sounds like a blast! Quote Link to comment
]2eDeYe Posted March 29, 2013 Report Share Posted March 29, 2013 Great looking truck :cool: Quote Link to comment
wayno Posted March 29, 2013 Report Share Posted March 29, 2013 It's been inside since the day I brought it home. I have not tried to fire it yet,,,, I will soon. Thanks for letting it go. needs a little floor patch around the seat mount before it gets hard miles. A caravan to canby sounds like a blast! There was a rats nest under the seat, and it did not have the windshield in it, so everything was soaked, when it was delivered, the first thing I did was take the seat out and totally clean all the rat/mice turds out of it to let it dry out, they had used the foam in the seat to make the nest, water logged foam everywhere, in the end there were more holes than I was hoping there would be. The best thing about it was that most of it is there, you don't have to go searching for impossible to find parts, just try to find a taillight bezel for an NL320. Get it started and driveable, then go from there, that is what I would do. Quote Link to comment
DMC Posted March 30, 2013 Author Report Share Posted March 30, 2013 You did a good job cleaning up the mess Wayno, thanks. All I smell now is old gas and old 90 wt :sick:,,, I can deal with that. Im going to swap out the rubber fuel lines, and install a filter, pour in a gallon of fresh gas and crank it over. Carb amazingly squirts!! If I can get it to run well. hydraulics for clutch and brakes are next. I have read that the "throwout bearing" is a carbon disc, any truth to that? Quote Link to comment
Stoffregen Motorsports Posted March 30, 2013 Report Share Posted March 30, 2013 Be sure to blow back through the hard fuel lines with air while the soft lines are off. Down here, mud bees tend to nest inside the lines. Quote Link to comment
DMC Posted April 1, 2013 Author Report Share Posted April 1, 2013 Woo Hoo, Tater runs!! Time to add some coolant, check for leaks,, Quote Link to comment
wayno Posted April 1, 2013 Report Share Posted April 1, 2013 Tater has a heart, you gave it the juice, and it came to life. :lol: Is it drawing fuel from the tank? Does the fuel gauge work? Isn't positive ground weird. :hmm: Quote Link to comment
DMC Posted April 1, 2013 Author Report Share Posted April 1, 2013 It is drawing from the fuel tank. None of the gauges are registering. I will probably clean some connections later. Radiator is whacked, so I hope it doesnt leak. And I hope the exhaust doesnt steam!! I need to make a key as well :hairy: Quote Link to comment
Zeke- Aus- Li Posted April 1, 2013 Report Share Posted April 1, 2013 Wow, nice nl mate. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.