jesusno2 Posted February 7, 2018 Author Report Share Posted February 7, 2018 I'm a hardcore lurker on this project. I'm jealous because I have a 79 210 that I'm trying to get running again. Needs brake solutions badly but not rich enough to go wilwood. Plus no one has been able to give suspension advice since it's pretty shot. What suspension advice do you need? 1 Quote Link to comment
d3rdsin Posted February 9, 2018 Report Share Posted February 9, 2018 So the suspension is shot, it need a replaced. I'd like to lower it in the rear as well as front but not sure what parts to use or source them. Quote Link to comment
jesusno2 Posted February 10, 2018 Author Report Share Posted February 10, 2018 Well you can buy new bushings. For the front end balljoints and tierod ends eveything you can get from ROCKAUTO.COM as far as lowering it you can cut the springs some. Or 510 struts or 280zx struts bolt in Quote Link to comment
JDOM310 Posted February 10, 2018 Report Share Posted February 10, 2018 Jesusno2 is right rockauto had everything I needed for front and rear buildup suspension wise. Jealous of your build too! I have 1980 210 running soso working Rust removal and panel replacement Quote Link to comment
jesusno2 Posted March 4, 2018 Author Report Share Posted March 4, 2018 gauge cluster is finally complete 1 Quote Link to comment
]2eDeYe Posted March 4, 2018 Report Share Posted March 4, 2018 Looks good. Are you putting the stock clear plastic back over the cluster? Quote Link to comment
jesusno2 Posted March 8, 2018 Author Report Share Posted March 8, 2018 It has a trim peice that goes around it and then the plastic will go back on Quote Link to comment
jesusno2 Posted May 23, 2018 Author Report Share Posted May 23, 2018 For sale. Trade for a sport quad 450cc with electric start Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.