squatches Posted September 27, 2012 Report Share Posted September 27, 2012 No sir... They just now opened a "pick-n-pull" in greenville and they dun hav any where are you located besides skyrim lols, i may be able to bring you one if i have it Quote Link to comment
metalmonkey47 Posted September 27, 2012 Report Share Posted September 27, 2012 Squatches don't get him too excited bro :thumbup: Quote Link to comment
squatches Posted September 27, 2012 Report Share Posted September 27, 2012 Squatches don't get him too excited bro :thumbup: haha if all else fails i can pull one out of my l20s i have stashed Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 too late Excited Quote Link to comment
Sealik Posted September 27, 2012 Report Share Posted September 27, 2012 Warped head The bottom of the head was only shaved ?....correct? Well....if you have a banana and the bottom is shaved to straighten it out....what about the top where the cam towers sit? Needs to be shaved also or the towers shimmed Correct? Quote Link to comment
Eagle_Adam Posted September 27, 2012 Report Share Posted September 27, 2012 if theres someone in portland with one they will donate ill ship it. Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 Warped head The bottom of the head was only shaved ?....correct? Well....if you have a banana and the bottom is shaved to straighten it out....what about the top where the cam towers sit? Needs to be shaved also or the towers shimmed Correct? If it was that bad then I should have had problems before I took it off. Shop said everything was straight. I think squatches has me covered. He's right up the road. I found a fuckup. #3 cam tower dowel seemsto be the wrong one. It was on the back and I couldn't see it. Probably that half a milimeter difference it takes to snap a cam :blush: I shaved it down and it's nice and snug now. Just like dropping the tensioner I won't do it again. Quote Link to comment
Sealik Posted September 27, 2012 Report Share Posted September 27, 2012 If it was that bad then I should have had problems before I took it off. Shop said everything was straight. I think squatches has me covered. He's right up the road. I found a fuckup. #3 cam tower dowel seemsto be the wrong one. It was on the back and I couldn't see it. Probably that half a milimeter difference it takes to snap a cam :blush: I shaved it down and it's nice and snug now. Just like dropping the tensioner I won't do it again. Not what you said yesterday.............. Dat Lurka Got my head back. The shop lady told me it wasen't a head but actually an aluminum banana. Shaved 10 thousandths. Had two burn valves. Apparently it's been off in the past. #2&3 intake valve seats are stainless steal. Yesterday, 05:06 PM Quote Link to comment
Dat Lurka Posted September 27, 2012 Author Report Share Posted September 27, 2012 They said it was straight when they were done with it :rofl: :poke: Quote Link to comment
Dat Lurka Posted September 28, 2012 Author Report Share Posted September 28, 2012 Squatch to the Rescue! Looks like it's gonna be ok. 1 Quote Link to comment
CFHdatsun77 Posted September 28, 2012 Report Share Posted September 28, 2012 I thought riften was in the southeastern province of skyrim... Ha i was Going to make a Skyrim Joke but didnt think anyone Would Get it. :rofl: Quote Link to comment
Phixius Posted September 28, 2012 Report Share Posted September 28, 2012 Ha i was Going to make a Skyrim Joke but didnt think anyone Would Get it. :rofl: Huh? ;) ....ive got parts datlurka, but im in the northwest. Hope your deal works out... How was the ride on horse back/carriage or travel by foot? Or you got dragons? ...Dont overload with shit, it makes it extreamly hard to move... Quote Link to comment
Dat Lurka Posted September 28, 2012 Author Report Share Posted September 28, 2012 It's all good. Cam is on the head. Still need a torque wrench. Quote Link to comment
mike Posted October 9, 2012 Report Share Posted October 9, 2012 Did you snap that during assembly/ prior to bolting on the head? How in the fuck??? Check this link... L series torque specs :) http://www.davidcmur...20tech4.htm#TS2 Roll the engine over by hand after you get it torqued down and the chain set to make sure nothing is binding. Quote Link to comment
Dat Lurka Posted October 10, 2012 Author Report Share Posted October 10, 2012 Did you snap that during assembly/ prior to bolting on the head? How in the fuck??? Check this link... L series torque specs :) http://www.davidcmur...20tech4.htm#TS2 Roll the engine over by hand after you get it torqued down and the chain set to make sure nothing is binding. Yeah I did it with the head off... pretty easy. All is well and it runs like a champ. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.