crazytimme Posted August 23, 2012 Report Share Posted August 23, 2012 Location is Tacoma WA,I sold my 510 wagon some time ago, and now am also selling all my parts.Parts have come from all over, some are 510 stuff, some 620, some 200sx, and the rest who knows.most of the 620 stuff is from a 78 or 79 620 I parted out that had bad front end damage.the 200sx stuff is from a 81 200sx I temporarily saved from some scrapers to get parts off of, Wiring was gone when I got it so I wasn't able to see if it ran, I suspect the head gasket went because I carefully took apart the engine, and now the #4 cylinder has light surface rust, but the other 3 dont have any rust.Some of the parts I picked up while buying actual parts I was needing at the time, or I decide to use something else.Here is a link to my Photo buck album so see the pictures of what I have.http://s1210.photobu...sunparts008.jpg(note: NOS head at the end will have its own add)Prices are firm, unless you you think I am just asking to much let me know. (would consider trade for Suzuki Samurai related stuff)And if you buy all of it at once I will give you a package price at $800 and my wife will buy you a 6 pack.I didn't price all the small stuff, if their is something you see you want let me know and we can figure out a price, if you are buying stuff I will probably just let you have it.I also have a "mobile parts shed" aka 4x6 enclosed trailer I will also be selling, but first need to sell about half of what I have as that is where it is stored. The trailer is not a looker, but doesn't leak, and tires are great shape.620 drive shaft short$10620 drive shaft long$10200sx drive shaft$10510 Wagon rear axle, H190 3.90, with new break stuff, and bearings$100Truck H190 3rd member with 4.375 gears$40510 front struts (one strute taken apart)$5510 front break calipers$10510 front break rotors and pads, New.$20200sx rear break calibers (from an '81 these are not the ones used for the disc conversions)$104 speed tranny(short shaft), synchros are will need to be replaced trade pending$305 speed tranny (long shaft) came out of a 620, but I don’t no if it was originally from that truck, unsure of condition. trade pending$80620 Intake and carb. intake emissions stuff removed or plugged. $20 Carb needs to be rebuilt badly, and missing choke$25Matchbox Dizzy (unsure of condtion, looks good, never put it to use) Sold$30 620 non-Matchbox electronic dizzy Sold$30 38mm SU, for parts. One carb body has a crack at the flange, and one of the needles is in bad shape, other then that they are complete sale pending$40 soldZ20E short block disassemble(can be used for L20b block with some work), main caps are in the correct position and so are the connecting rod caps. Long Connecting Rods are N8500 @ 152.45mm with the corresponding short pistons.$100Head W58, round port, Open chamber, ran when replaced with a 219 head$403 L20b connecting rods$5 (free with other stuff)4 L20b Rods and pistons$40L18 short block with Fly wheel. Ran when pulled. Pending sale$100 L16 rod, pistons, crank, front cover$20L20b short block, front cover cracked from me dropping it, U67 head(sold). Condition is uncertain, The Guy I bought it from was told that it ran.$40L20b Fly wheel, 6 bolt 225mm Sold$20 Z20 (same as L20b) Flywheel with clutch, 6 bolt 200mm Sold$30 Valve cover with thick textured black coating$20z20e starter$20Starter from L20b$20Alternator #1 ???$10Alternator #2 ???$10Z20E (nap-Z) Exhaust manifold$15L20b Round Port, Exhaust Manifold$10Exhaust Header, square Port$50620 head light frame set$5 Free stuff for pick up only (I will charge a premium for handaling if you want it shipped) Head 210 casting, not all the valve train pieces their, condition unknown, rough shape valve heads are rusty, but not burnt.2 - 280 Z seat no rails300zx seat with rails Link to comment
Silky_Johnson Posted August 23, 2012 Report Share Posted August 23, 2012 Dibs on a 200mm flywheel if there is one. PM sent. Link to comment
chester Posted August 23, 2012 Report Share Posted August 23, 2012 I want the matchbox dizzy Link to comment
Rustina 510 Posted August 23, 2012 Report Share Posted August 23, 2012 I'll take the front brake caliper for 15$ if you can ship it to 97230 area code and if it's in usable condition. Pm me Link to comment
darc510 Posted August 24, 2012 Report Share Posted August 24, 2012 Your inbox must be full... I'm really interested in a few of your parts for sale: Flywheel with clutch setup (Z20 $30) didn't see pricing for the following but seen them on the cardboard: Trans cover plate (middle of pic 4/44, in the middle) Alternator bottom mount (same pic) Let me know what you looking for on those last two items... Shipping would be to 21225 Thanks, Ross Link to comment
crazytimme Posted August 24, 2012 Author Report Share Posted August 24, 2012 Inbox is cleared out, sorry about that. Sending PM's Link to comment
David.P Posted August 24, 2012 Report Share Posted August 24, 2012 pmed about the z20e engine hope we can work something out david Link to comment
MantisX620 Posted August 24, 2012 Report Share Posted August 24, 2012 Is that a radiator overflow tank in the 2nd pic? If so, how much shipped to 27712? Thanks MantisX Link to comment
olderdat620 Posted August 25, 2012 Report Share Posted August 25, 2012 in picture 29 you have a block with the lower inlet where the lower radiator hose connects to the block how much to send to 92281- thanx Link to comment
datzenmike Posted August 25, 2012 Report Share Posted August 25, 2012 I have found that Z series starters won't fit the L series because of the tilt. The solenoid hits the oil dip stick tube. L series will easily clear the Z series though. Link to comment
crazytimme Posted August 25, 2012 Author Report Share Posted August 25, 2012 I PM'ed everyone, and thank you for the info on the starter, I learned something new, and changed the ad. Link to comment
crazytimme Posted September 6, 2012 Author Report Share Posted September 6, 2012 Add has been updated Link to comment
crazytimme Posted March 3, 2013 Author Report Share Posted March 3, 2013 Bump Items are still for sale, I have just been to busy to sale the last of the stuff from my datsun life. Would consider trade for Suzuki Samurai stuff. Link to comment
smoke'sDat's Posted March 3, 2013 Report Share Posted March 3, 2013 In one of your pictures I seen the thermostat housing set both top and bottom do you still have it cause I'm in need of one badly, let me know and the price if you still have it. Thanks Link to comment
Camtron Posted March 3, 2013 Report Share Posted March 3, 2013 I'll take the rear 200sx brake calipers. Shipping will be to 74578! These will work for the rear disk conversion using the EDP brackets, right? Link to comment
crazytimme Posted March 3, 2013 Author Report Share Posted March 3, 2013 In one of your pictures I seen the thermostat housing set both top and bottom do you still have it cause I'm in need of one badly, let me know and the price if you still have it. Thanks Maybe, I sold one but may still have another one, Let me check this after noon. 1 Link to comment
crazytimme Posted March 3, 2013 Author Report Share Posted March 3, 2013 I'll take the rear 200sx brake calipers. Shipping will be to 74578!These will work for the rear disk conversion using the EDP brackets, right? They should fit in the medium flate rate box so $12 for shipping. as far as the EDP brackets i have no clue as I havent heard of them, the 81 200sx they came off of had a H165 in case that helps. Link to comment
Camtron Posted March 3, 2013 Report Share Posted March 3, 2013 Well crap. It looks like I'd need to use 82/83 calipers. Sorry man. GLWS! Link to comment
crazytimme Posted March 3, 2013 Author Report Share Posted March 3, 2013 Sorry I couldn't help Link to comment
Camtron Posted March 4, 2013 Report Share Posted March 4, 2013 Hey, no problem. Sorry I couldn't lighten your load. Link to comment
Fmt 510 Posted March 4, 2013 Report Share Posted March 4, 2013 Hi could u tell me how much for the l20 motor shipped to 94536 u can call me at (209)968-5010 thanks Andy Link to comment
crazytimme Posted March 4, 2013 Author Report Share Posted March 4, 2013 I just looked up a quick estimate for shipping and it looks like it would be at least $450 (shipping UPS freight). An actual freight company might be cheaper, but I dought by that much as I don't have access to a shipping dock, And last time I did a quick search I didnt find any main terminals near me, they are closer to seattle. On top of shipping will will also add a small fee for my time and expenses to make a create and if need be delivered. So total cost for you to get a used L20b (which I have never seen running) would be approx $600 - $700. If you want can find a cheaper method of shipping let me know my zip is 98445. Wrong pricing because I just found an error in my quoting. Link to comment
crazytimme Posted March 4, 2013 Author Report Share Posted March 4, 2013 Sorry I went back to double check the quote, and because i will need you use a lift gate on my end the price is much higher. If you have a Loading dock or fork lift the shipping would be about $580, abut if you also need the use of a lift gate the price would be about $715. So by the time I create up the Motor, paypa fees, shipping, and the motor itself you will be looking at close to $850 for an engine that needs a rebuild. Link to comment
Rustina 510 Posted March 4, 2013 Report Share Posted March 4, 2013 Starter l20b shipped to 97206 Portland price quite please. Send me a pm or text 503.510.7921 Link to comment
72goon Posted March 6, 2013 Report Share Posted March 6, 2013 on your drive shaft for the 620 does it have a carrier bearing on it and would it fit a 76?? Link to comment
Recommended Posts