Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 Got bored with cleaning and painting........ Decided to play around..........anyone see where this is going?? Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 How it's set up now is with 8mm spacers....... ....so I removed them to test fit these..... Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 Test fit the rear first....... Different offset....... 195 looks like it'll fit for sure.......I'd like to fit a 215.....but I think that's wishful thinking....... Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 There will be room up front when the 280zx struts suck it in a bit...... Lots of room on the inside..... Hope the bigger brakes clear.... Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 215 deffinily won't fit in here..... We're having some rubbage....... Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 Dropped the coilover and let the air out of the rear shocks........won't go no mo lo....... Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 Make compare........... Quote Link to comment
skyblue Posted January 31, 2014 Report Share Posted January 31, 2014 Nice. I'm bringing the truck Saturday. MAybe we can do a quick tire swap to see if the 215's fit 1 Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 NICE!!! Quote Link to comment
Ranman72 Posted January 31, 2014 Report Share Posted January 31, 2014 I hate slot mags on 510's but those dont look half bad on your car more lip for sure 2 Quote Link to comment
demo243 Posted January 31, 2014 Report Share Posted January 31, 2014 Those slots do look pretty good... 1 Quote Link to comment
TENDRIL Posted January 31, 2014 Report Share Posted January 31, 2014 i think they look better than the z rims... annnd i vote ORANGE 1 Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 i think they look better than the z rims... I agree....I've always liked these rims on 240s.......saw one Dime with them.....but it wasn't right on that dime..... If my dime had a clean paint job....I don't think they would look as good..... They are from the era and I'm gonna run'em when I do the strut swap..................oh god...... :w00t: Quote Link to comment
TENDRIL Posted January 31, 2014 Report Share Posted January 31, 2014 well i was with randy, untill i seen them on this and your car 1 Quote Link to comment
TENDRIL Posted January 31, 2014 Report Share Posted January 31, 2014 i think its all about the right amount of polish and tire 2 Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 ....agreed Quote Link to comment
Eagle_Adam Posted January 31, 2014 Report Share Posted January 31, 2014 X2 - polish that slot busta 1 Quote Link to comment
Busta Nut Posted January 31, 2014 Author Report Share Posted January 31, 2014 .....on it. Quote Link to comment
Busta Nut Posted February 1, 2014 Author Report Share Posted February 1, 2014 Damn exhaust hanger......... There's gotta be a better way..... 1 Quote Link to comment
Busta Nut Posted February 1, 2014 Author Report Share Posted February 1, 2014 Doty came by for a test fit...... Don't think 215s are gonna fit........ Good in the back......... Not so much up front.............. I guess we'll see........... Quote Link to comment
freetheoranges Posted February 1, 2014 Report Share Posted February 1, 2014 What are your thoughts on that flex pipe from summit? Would you install it through the crossmember or...? Quote Link to comment
Busta Nut Posted February 1, 2014 Author Report Share Posted February 1, 2014 Seems reasonable.....doesn't have an overall diameter..... If you could cram it the crossmember it would be cool.........my pipe is 2 1/4" I think.....maybe 2 1/2".....that would make the flex part bigger so I'm not sure...... Has anyone used this?? http://www.summitracing.com/parts/jex-flx2010b/overview/ Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.