spudly13 Posted April 14, 2012 Report Share Posted April 14, 2012 Love the car! i wish i would have done mine this way... Not to thread jack but why does everyone hate on rotas? Some car communitys could care less, and some are like ew rotas.... Just curious.. Quote Link to comment
that one guy Posted April 14, 2012 Report Share Posted April 14, 2012 I don't have a metal ring? :confused: And everyone hates on Honda's because every rich little momma's boy buys one with their parents money, pays to have someone vtec upgrade and turbo the damn thing, puts in a giant ass stero system, and then they drive around like they're the hottest piece of ass on the street, and they make fun of all the car's that have a worse paint job, or look like crap, and then cry to mommy for more money when said terrible looking cars take a giant steaming dump on them off the line and down the mountain. At least around here anyways, and that is why I hate honda's. :mad: /end/rant/ Quote Link to comment
Indey Posted April 14, 2012 Author Report Share Posted April 14, 2012 Love the car! i wish i would have done mine this way... Not to thread jack but why does everyone hate on rotas? Some car communitys could care less, and some are like ew rotas.... Just curious.. It's not really a matter of hating on Rota's. The issue is when people buy Rota's and knock them off as the real deal. IE Rota Grid's with TE37 decals on them. That doesn't happen so much in this community from what I've seen. Regardless my biggest issue with Rota is that they are not real wheels, and being knock offs they're not made as well as the real ones. Of course this is expected with the difference in price between real/fake wheels. I've had Rota's on a few of my cars including this one and I've never had an issue with them. However this does not mean that they're the end all be all wheel for my car, I will move over to custom sized Panasports when money is easier to come by. I don't have a metal ring? :confused: And everyone hates on Honda's because every rich little momma's boy buys one with their parents money, pays to have someone vtec upgrade and turbo the damn thing, puts in a giant ass stero system, and then they drive around like they're the hottest piece of ass on the street, and they make fun of all the car's that have a worse paint job, or look like crap, and then cry to mommy for more money when said terrible looking cars take a giant steaming dump on them off the line and down the mountain. At least around here anyways, and that is why I hate honda's. :mad: /end/rant/ That would explain it! Now go get yourself a metal ring :rofl: And he said why's everyone hate on Rota's not Honda's haha, I have a Honda as it is, but I assure you my parents did not pay for it, or the parts on it. Though the issue with Honda's currently is actually just the entire age bracket and mentality. Being that I'm a part of the Honda scene and I get to look at it up close, I hate it currently. It's filled with people who are overly cheap and won't spend money on quality parts, because the cheap parts are "just as good". The term JDM in the current scene is used everywhere to describe everything, which is overtly irritating, and really the people in the Honda scene are doing what they do to be "cool" to their peers, being that most of the people who have your average shit pile Honda are around 16-19 years old. So you end up seeing a lot of the same car left and right. Overly loud exhaust for a D15 single cam that puts out a whopping 105hp. Or at least when it was new it did. They buy replica type R and Mugen lips for 60 dollars, and then they slam their cars with some fake wheels, and think it's ready for a magazine shoot. It's absolutely terrible what they've done to the scene. Though on that note, I've been thinking of selling my del Sol and picking up a Z32 to daily, just because I no longer wish to be associated with the Honda world....and because I think Z32's are bad ass. Whenever I see a modified Honda on the streets all I ever think is "please go away, don't drive next to me, don't look at me, don't look at my del Sol and think that we're the same because we're not. You are a douche with a D series and fake parts everywhere that you bought off of eBay, and my car is full of real expensive parts that I worked long and hard for" /end current Honda scene rant :rofl: Quote Link to comment
that one guy Posted April 14, 2012 Report Share Posted April 14, 2012 Oh, sorry... I swore that said Honda... :blush: And that's exactly the reason I don't like the honda scene as of this century, no offense as I can tell you did everything the correct way and by yourself! Anyways, thanks for the ring info, I had no idea! Really liking how it's coming along! Quote Link to comment
Indey Posted April 14, 2012 Author Report Share Posted April 14, 2012 Oh, sorry... I swore that said Honda... :blush: And that's exactly the reason I don't like the honda scene as of this century, no offense as I can tell you did everything the correct way and by yourself! Anyways, thanks for the ring info, I had no idea! Really liking how it's coming along! No offense taken haha, I love my Honda but as for reasons stated above I think it's getting close to that time I let her go and focus only on the Z :w00t: Thanks I'm glad it's finally getting work done to it again it's been a while since I had done anything to it... I hate when I can't work on the Z haha Quote Link to comment
that one guy Posted April 14, 2012 Report Share Posted April 14, 2012 I know the feeling :geek: After I bought my 78, it sat for 6 monthes before I finally figured out that my distributor was 1800 off. Oh well. And then I drove her, and the wheel fell off. But now I has TEH MONIES!!! so new rims and registration now :) Keep updating cause I like how your's is going! Quote Link to comment
spudly13 Posted April 14, 2012 Report Share Posted April 14, 2012 haha alright well thats good to know! i guess you could say i was curious cause i have rotas for my current project Z, but like you, want something different in the long run. I cant wait to see how your car looks on some nice coils! (rotas or not ;) ) Quote Link to comment
Indey Posted April 24, 2012 Author Report Share Posted April 24, 2012 I know the feeling :geek: After I bought my 78, it sat for 6 monthes before I finally figured out that my distributor was 1800 off. Oh well. And then I drove her, and the wheel fell off. But now I has TEH MONIES!!! so new rims and registration now :) Keep updating cause I like how your's is going! Yeesh sounds like a pain like mine was! For a while stuff was constantly breaking, but it didn't look as though the car had been very well taken care of previously. I try to update as soon as I can all the time! Low funding never helps though haha. haha alright well thats good to know! i guess you could say i was curious cause i have rotas for my current project Z, but like you, want something different in the long run. I cant wait to see how your car looks on some nice coils! (rotas or not ;) ) They've served great as a temp wheel, no issues whatsoever, so hey if people want to hate them, that's fine. I don't mind haha. I want to see it on coils too! The closer it gets to summer the closer coils are, It's just a waiting game right now! My MSA 6-1 Coated header finally found its way home! Quote Link to comment
Indey Posted June 4, 2012 Author Report Share Posted June 4, 2012 So, since I'm currently poor I have to make do with what's laying around the garage. That being said I went into cleaning mode... I got tired of looking at the tops of the turns signals, since someone had...spray painted them? I'm not quite sure.. Either way I decided to take them apart and get to cleaning.. Ugly.... Who does that? Going to take the passanger side out turned out to be....eventful. Stripped screw. It's fine just cut a flat head into it Or.... not. You can see that my coolant bottle was also...very ugly..and had remnents of paint on it as well. Cleaned up the turn signal covers and resprayed them. And after sanding away most of the black paint (some spots were very hard to get to) I reassembled everything. Unfortunately the bottle didn't clean up as well as I had hoped.. Oh well. It's better than it was. After all this I went and fiddled around with my distributor timing, for some reason it was retarded as far as it could go. Quote Link to comment
Indey Posted July 10, 2012 Author Report Share Posted July 10, 2012 So my fuel system is leaking from a few spots, ie the rail and 2 injectors, so It's time to revamp the whole system. I started out with picking up a JSK Fuel Rail from a friend. Then I took it apart to run a tap through it and clear out all of the old teflon. and as of today most of the rail is back together, and I placed an order for a Aeromotive Fuel Pressure Gauge, and a Edlebrock Fuel Pressure Regulator. Quote Link to comment
Indey Posted July 13, 2012 Author Report Share Posted July 13, 2012 Fuel Rail coming back together. Car got a bath :) And my Aeromotive Fuel Pressure Gauge came in! Quote Link to comment
Indey Posted July 14, 2012 Author Report Share Posted July 14, 2012 Cleaning off a new piece! .... sure takes a lot out of you though :P especially in this damn heat Quote Link to comment
Indey Posted July 15, 2012 Author Report Share Posted July 15, 2012 Alright so I went to do my oil change yesterday, and after I was done I decided to do some poking around under the car, low and behold, I found this. Funny I always thought motor mounts were supposed to be bolted down properly :P Pass Side Driver Side Oh well, they're nice and tight now Today I took a drive and picked up a 5spd to replace my boring 4spd :) 5spd, meet your new home. 5spd, meet cleaning stuff. I'll get it a bit better later, it was just too hot to keep going with it. Quote Link to comment
Indey Posted July 25, 2012 Author Report Share Posted July 25, 2012 So my fuel pressure regulator finally came in, all that's left is some injectors, a manifold, some new hardware, and all the AN fittings i'll need for the fuel system! Quote Link to comment
Indey Posted July 28, 2012 Author Report Share Posted July 28, 2012 Picked up some fittings. Not sure how I feel about the super nickel finish one...but if I don't like it I'll just go get a black one to replace it Putting some fittings on...sort of...I need some AN wrenches Looks alright with the rail I also need standard sized allen keys Quote Link to comment
Indey Posted August 1, 2012 Author Report Share Posted August 1, 2012 Ohhhhh i gawt da bumpers four da two fawty! Or at least I finally got a rear one, to add to my front one :P Previous owner put up a pic of the car on bookface so I stole it Quote Link to comment
Indey Posted August 5, 2012 Author Report Share Posted August 5, 2012 So, I found out that my clutch slave is leaking, and my trans is leaking, and my mustache bar has a pretty crack in it :) SO! Monday I'm ordering the AZC Mustache Bar, new front and rear seals for the trans, new clutch slave, new speedo gear o ring, and then all the parts to replace everything on the 82 shifter my friend picked up for me today, SO, pin, clip, bushings, lower bushing, etc. More fittings to work on my fuel system will be on order as well :) in the mean time! here's the seat that I took from my del sol to put into the Z, I also have a works bell rapfix II, but i'll get pictures of that when I'm downstairs next :P It's a bit dirty, but whatever it's fine Quote Link to comment
Indey Posted August 15, 2012 Author Report Share Posted August 15, 2012 I have a shifter! and no picture! cause I'm useless! and my friend needed his 240 bumper back cause the one he ended up buying was worse! :P 1 Quote Link to comment
Indey Posted August 18, 2012 Author Report Share Posted August 18, 2012 ALRIGHT! Picture time! Shifter! More AN Fittings! Still need AN wrenches! So, I was looking at my exhaust manifold studs, and fearing them, because well...they look like they're all going to snap without annnnny trouble at all, and I really do hate drilling out old studs and what not....HOWEVER, I decided to test one of them, and my car is a fucking champion. Seriously I expected this shit to just snap instantly. Old with New As I've stated before... I'm a fan of buying things new. If I can get it new, then more than likely. I'll get it new. I soon realized my work bench is being overtaken by z car parts. Now as said I'd get a picture of my Works Bell Quick Release. For those of you that don't know, Works Bell is the original maker of the "NRG" quick release and the typical eBay ball bearing QR's you see everywhere. These things are absolutely beautiful, have no play whatsoever and are just top notch all around. The version I have is apparently some special edition one, I forgot what it was called though. The Broadway from my del Sol will be going in the Z when it's out of the sun. The piece on the left is a Omamori, again for those that don't know, and is a charm, there are many different types, and this one represents safe travel. AAAAND finally. One of my stupid fuel leaks :( That's all... I'm still waiting for other junk to arrive... I need to get all this crap finished up before the JCCS! Quote Link to comment
Indey Posted August 19, 2012 Author Report Share Posted August 19, 2012 More crap has been ordered! Quote Link to comment
Indey Posted September 2, 2012 Author Report Share Posted September 2, 2012 Junk arrived... I did a quick fix on my current injector leak... because I wanted to drive the Z again, and then the rear diff mount and mustache bar decided it was just time to be done working :P of course right before the JCCS....granted it MAY just have had something to do with me launching on it...but you never know. Fixed one of my ground wires, someone had crimped some ground ring to it, and done a terrible job doing so... so I did this More fittings, transmission seals, some random shifter parts, injectors, injector clips, mounting blocks, seals, and a clutch slave Quick mock up of the rail/pressure regulator set up. New stuff.....you should know by now...i like that shit. I'm still waiting on my Arizona Z Car Mustache Bar and Solid Diff Mount, if it doesn't get here by close to the 15th, I'm going to be borrowing a friends extra set, just to make it to the JCCS, however I'd prefer to just get the job done once... Quote Link to comment
Indey Posted September 11, 2012 Author Report Share Posted September 11, 2012 It's been a good day! My mustache bar and diff mount finally showed up :) and fortunately these parts are not waiting to go on the car! Unlike my whole other pile of junk :l SO! here we go! AZC Mustache Bar :) Solid Diff Mount I've been needing these for a while, but I had always managed to get by with regular allen keys and a wrench...but not this time :P Non-descript garage picture :P Where my mustache bar was ripped. It's too bad the gas tank blocks the view of this thing.. I need to swing by king bolt tomorrow....and pick up different bolts for the front diff mount, and then i'll clean off the cross member and repaint it, and then reassemble all of it! Quote Link to comment
Indey Posted October 18, 2012 Author Report Share Posted October 18, 2012 It's been a while.... The car was SUPPOSED to make it to the JCCS on sept 15th. However I ran into issues... It started out with the rear diff mount not quite fitting in, I'll have to put it in once the rear mustache bar is loose again, so the stock mount is back in currently, for the front diff mount. Regardless I started being able to drive the car again, and was still running into overheating issues. I flushed the cooling system, no luck, replaced the waterpump and t.stat, but again no luck. Unfortunately I was stuck with a overheating car and a broken phone the night before the JCCS, needless to say I was not very happy. I'm currently left with a radiator left to replace, which will happen as soon as I get back from spending some family time in Minnesota.. The radiator is a AZC cross flow, and is already waiting for me, for when I return home on the 19th of november. However...my painter decided he wanted to buy my del sol shell...and motor, and a bunch of other parts from it....so long story short, he's going to be painting and doing all the body work on the Z for me, and adding cash on top, which will be used to pay for the body parts for the car.... I'm hoping once this is all said and done, i'll have a significantly nicer car, that will still need damn coilovers :P but hopefully that'll get taken care of soon enough....anyways.. Sorry for the book! That's really all for now... I hope to have updates...eventually. Quote Link to comment
mattyhacks71 Posted October 18, 2012 Report Share Posted October 18, 2012 I like the look of those meaty tires B) Even though Rotas are less expensive versions of higher grade wheels out there, my understanding is that they're pretty good quality for their price. And it's also kind of harsh to label them as "knock offs". Lets face it majority of people don't need anything more for their daily drivers. Then again I do like me some deep dish Watanabes ;) Quote Link to comment
Indey Posted October 25, 2012 Author Report Share Posted October 25, 2012 I like the look of those meaty tires B) Even though Rotas are less expensive versions of higher grade wheels out there, my understanding is that they're pretty good quality for their price. And it's also kind of harsh to label them as "knock offs". Lets face it majority of people don't need anything more for their daily drivers. Then again I do like me some deep dish Watanabes ;) They are good quality for the price, and Rota actually makes the OEM wheels for many cars, regardless they are a knock off of a real wheel, so that doesn't sit all too well with me. They work wonderfully for now, but they are temporary. In other news my gf just bought me a N42 non-egr manifold for my birthday and it's being shipped to my house right now :D Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.