Dirttrack510 Posted January 19, 2012 Author Report Share Posted January 19, 2012 I will probably wanna use my own spider gears if possible, because they are welded up to make my rear end a posi. if that matters :confused: Quote Link to comment
Ratty260z Posted January 19, 2012 Report Share Posted January 19, 2012 Ehh if your spider gears are welded you probably can't use them to swap in a different diff. Quote Link to comment
wayno Posted January 19, 2012 Report Share Posted January 19, 2012 If the spyders are welded together, they are useless, they are in that pumpkin forever. Now you need two rearends, one 510 rearend that is not welded and one H190 set of 488 gears not welded either. Quote Link to comment
Dirttrack510 Posted January 19, 2012 Author Report Share Posted January 19, 2012 Oh, The quest continues... lol :D I have one unwelded 510 rear end, so at least I can get the current race wagon done. Quote Link to comment
datzenmike Posted January 19, 2012 Report Share Posted January 19, 2012 Have you been able to get ahold of Andyinc about that gearset he has? I live near him, but he is hard to get ahold of, I can go over there and check the gearset and see what it is. Datzenmike, are the axle teeth the same in the 510 as the L320? How many teeth do the 510s have, the 320s with 488 gearsets have 13 teeth. Roadster, 510, early 610 and 810/Maxima goons......... 23 spline 520/521/620/720/late S110................................... 29 spline 320.................................................................... 13 spline Quote Link to comment
wayno Posted January 19, 2012 Report Share Posted January 19, 2012 Roadster, 510, early 610 and Maxima goons......... 23 spline 520/521/620/720................................................. 29 spline 320.................................................................... 13 spline Thanks datzenmike, there not the same, ya learn something new everyday, I have a goon rear axle out back, just have been to lazy to pull it apart and look. Thanks again Quote Link to comment
Z-train Posted January 19, 2012 Report Share Posted January 19, 2012 Roadster, 510, early 610 and Maxima goons......... 23 spline 520/521/620/720/late S110................................... 29 spline 320.................................................................... 13 spline What about 810 goons?Swap with 620 chunks? Quote Link to comment
datzenmike Posted January 20, 2012 Report Share Posted January 20, 2012 810/Maxima goons are 23 spline, same as the 510 goon. 810s were all 3.70 but only the later Maximas were 3.70s on the LD28 and gas automatics. The other maximas were 3.364 and 3.545 Quote Link to comment
Dirttrack510 Posted January 20, 2012 Author Report Share Posted January 20, 2012 Lots of good info here. Datzenmike is a Datto God... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.