gmartin Posted December 28, 2011 Report Share Posted December 28, 2011 I'm selling my red Datsun B210 race car (1975) I have been running in Group 2 in ICSCC (NW US) for the last 11 years. Car runs in either IP or HP production class. Comes with complete running 1977 B210 parts car, extra engine and trans, extra wheels and tires, extra suspension and rear axel. 1.4 L A14 engine built by Dan Hall in 99. Has a four year old Webber DGV modified for racing at Loynings. Great beginner car for Novice racer or use for a Track day car. Inexpensive and reliable. Two races on new Hoosier race tires. $1500. Pictures avaialble on request. Car is located in Portland Oregon. Gary. gmartin@easystreet dot net. Link to comment
RedBanner Posted December 29, 2011 Report Share Posted December 29, 2011 "It is caged, and it is a 4 speed. Cage it built to SCCA/ICSCC IT specs. It has a race seat and 5 point harness, Wink rearview mirror, Main Cutoff switch, fire extinguisher, spare seat for passenger driver training days. It does not have a fuel cell. Has a tach and oil pressure and temp guages. It is a production car, so engine is stock, but professionally built. It does not have a header, but has the Weber DGV race carb. Three sets of wheels, main set are Panasports with almost new Hoosier R1 race tires, spare set with older Hoosier race tires, and a set of chrome street wheels with street tires (this is the rain set) . Body is not too bad, the front lip of the hood has some rust, and there is slight damage to the right rocker panel behind RF wheel. Other than that it is straght. Has all the stock glass in it at the moment. Paint is not all that bad, it polishes up. all the stock glass in it at the moment. Paint is not all that bad, it polishes up." "I have raced it since 1999. I have about 30 race weekends/track days on it since I bought it. I don't know the full history of the car, but it goes back into the 80's. It is a local Portland Oregon car it's whole life The parts car is a little worse, has some rust and body damage, but it is al there. That one is an automatic. But I have two spare 4 speeds (one in pieces, and one good one), a spare A14 short block, front struts and rear axel and leaf springs. Car is in SW Portland, Tigard area if you want to setup a time to look it over." Gary Martin Link to comment
RedBanner Posted December 29, 2011 Report Share Posted December 29, 2011 I hope that^ wasnt out of line gary, I see its an awsome car, not going to lowball you Thanks for the info. Glws! DO WANT THO!! Link to comment
RedBanner Posted December 30, 2011 Report Share Posted December 30, 2011 Gary was kind enuff to send me some more oics for the masses Link to comment
DISLEXICDIME Posted December 30, 2011 Report Share Posted December 30, 2011 that thing is buy my house . actual it is closer to nismodoctor's house. its a cool looking car Link to comment
]2eDeYe Posted December 30, 2011 Report Share Posted December 30, 2011 Wow, nice. GLWS Link to comment
fisch Posted December 30, 2011 Report Share Posted December 30, 2011 This is a cool thing! GLWS Link to comment
Rotary510 Posted December 30, 2011 Report Share Posted December 30, 2011 I love roll cages...with padding that is :) Link to comment
RedBanner Posted December 30, 2011 Report Share Posted December 30, 2011 For shure a good deal with all the extras and the wheels, I would daily that thing in a second! Link to comment
king bee66 Posted December 30, 2011 Report Share Posted December 30, 2011 that things begging for a larger motor Link to comment
RedBanner Posted December 30, 2011 Report Share Posted December 30, 2011 that things begging for a larger motor But with a 5speed it would pobly still get 35mpg Link to comment
king bee66 Posted December 30, 2011 Report Share Posted December 30, 2011 you could still just daily it with a larger motor, and get use of the rollcage on the weekends Link to comment
datsun mom Posted December 31, 2011 Report Share Posted December 31, 2011 nice car hope it goes quickly for you. "datsun Dan" built it? hes been around the track a few times:) Link to comment
Zfighter76 Posted January 18, 2012 Report Share Posted January 18, 2012 wanna trade fer a 73' 620 with a z20 and side drafts??? i'm in cali but i would love to take a trip. it'll make it all the way there! Link to comment
Recommended Posts