five10freak Posted March 3, 2012 Report Share Posted March 3, 2012 this one is more of a repair but also some fab work this is my best friends 240sx, very clean inside and out, we dropped a RB30 in it and had decided after we did all the work, to have a PRO SHOP fab up his custom intercooler, here are the results, LOL the patient prognosis, current radiator too small, getting heat soak, must go more bigger. to the pros it goes then on the way home were like,WTF???? what the hell is all that noise up front, and why are ur fog lights dancing around,etc,etc,etc this is what i found these ass hats totally cut up my boys bumper support, frame rail, fog light brackets, etc,etc. then zip tied it all back like we wouldn't notice this. so that was the fail, her i come to save his ass this is has bumper support, or whats left of it some cuttin, grindin, drillin and weldin frame plates and test fit finished product, all free of charge for my bestie,LOL Quote Link to comment
flatcat19 Posted March 3, 2012 Report Share Posted March 3, 2012 All super work! :thumbup: Quote Link to comment
KELMO Posted November 5, 2012 Report Share Posted November 5, 2012 This aint half as cool as some of the stuff on here but I'm gonna post it anyway. I needed to store some motors in the garage and out of the way....had some 2x6's layin at the side of the house....next thing you know, I got a roll around crate that will hold 2 A motors and slides under the wire shelves I have on either side of the garage. Thinking I will put some wire basket type stuff on the bottom to hold the oil cans and drain pan. Quote Link to comment
0.C. Posted November 6, 2012 Author Report Share Posted November 6, 2012 Been doing a lot of sheet metal recently. Here's a patch I made a few weeks ago. Ran it thru the slip roll Trace the bead Ran it thru the bead roller Cut, Fit, Weld Done Quote Link to comment
0.C. Posted November 6, 2012 Author Report Share Posted November 6, 2012 2eDeYe' timestamp='1324567438' post='597714']...and manufacturers are having a hard time finding good machinists. O.C., any pics of that installed? Quote Link to comment
Kramer1981 Posted November 6, 2012 Report Share Posted November 6, 2012 One of my old trucks, 4x2 to 4x4 conversion, obviously nowhere close to being a finished truck, got 7 inches of lift on this 73 Roadrunner, PA car, new floors, new-ish 1/4s, first time hangin a 1/4 go easy on me on that 1/4, making one out of 4 pieces being my first 1/4 wasnt easy...in all fairness, somebody else did the other side and the bodywork is cracking like hell, but he didnt warp the metal as much....putz I ran outta 75/25 just after tacking, I oxyacetylene welded this Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.