68Datsun510 Posted June 7, 2011 Report Share Posted June 7, 2011 Hey guys, im trying to figure out a way to space out my ZX wheels on the front of my 510, i have ZX struts, and i dont like how the wheels look "sucked in" because of the narrowed track width. I thought a bolt on 12mm spacer would bring things back to zero offset and punch the wheels out, but i cant find any 12mm bolt on spacers. Its probably too thin of aluminum to support the weight. Anyone else solve this or try it??? Quote Link to comment
jesusno2 Posted June 7, 2011 Report Share Posted June 7, 2011 lotta guys swap hubs or use +15 and higher wheels. I have zx struts also and im not a fan of the wheels being sucked in either. I'm running a +20 wheel with a 5/16 spacer. I shoulda just shotened a set of 510 struts and put wilwood brakes on it. trying to find +15 or higher is hard to do anymore. Quote Link to comment
philcas1987 Posted June 7, 2011 Report Share Posted June 7, 2011 300zx hubs =wilwoods! Quote Link to comment
banzai510(hainz) Posted June 7, 2011 Report Share Posted June 7, 2011 +15mm TE37s will take care of thise or some cheap +15 ROTA RBs try ichiba for the spacers. but dont go to big and you need I say half the threads http://www.workwheelsusa.com/product.php?category=29&wheel=143 Quote Link to comment
68Datsun510 Posted June 7, 2011 Author Report Share Posted June 7, 2011 Changnig my whole suspension around to punch out wheels is excessive, i think ill just install extended studs and use a 1/2" slip on spacer Quote Link to comment
Laecaon Posted June 7, 2011 Report Share Posted June 7, 2011 wanted to switch to zx struts, because 510 struts with zx wheels I had some poke which looked odd when the rear was easily recessed. Now it looks uniform. Quote Link to comment
INDY510 Posted June 7, 2011 Report Share Posted June 7, 2011 . I got something 1000ths(???) spacers from Troy ....... . . I said I wanted 1/2" spacers and matching longer studs for the front ........ it was like $75??? ... I don't remember Then I also have two cheapo looking ~3/8" alum. spacers that hardly get any thread bite on stock lugs,,,, but you can borrow them at Canby .... :lol: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.