budsaipan Posted April 5, 2011 Report Share Posted April 5, 2011 Wow that looks great. Can I join in on that too?? lol Link to comment
banzai510(hainz) Posted April 5, 2011 Report Share Posted April 5, 2011 Rob are those 1/4 in so the washers fit with the intake evenly? also you make the stock exhaust manifold flange also for a Y pipe? also you make a flywheel /stop holder so one can torq the flywheel down with out it turning? Link to comment
510rob Posted April 5, 2011 Report Share Posted April 5, 2011 Aaron! Good to see you here! I asked Aaron to post here; his website has been "hacked" and is still screwed up - maybe someone here knows how to help him out with that?!? Might be worth a flange or two?!? As of a few months ago, Aaron has been making U67 flanges from my drawing. (same drawing as the ones Jeff had made by "Jesusno2") Aaron makes a whole bunch of other flanges as well. Turbo, KA24, SR20, etc... Perfect solution Link to comment
Logical1 Posted April 5, 2011 Report Share Posted April 5, 2011 Aaron! Good to see you here! I asked Aaron to post here; his website has been "hacked" and is still screwed up - maybe someone here knows how to help him out with that?!? Might be worth a flange or two?!? As of a few months ago, Aaron has been making U67 flanges from my drawing. (same drawing as the ones Jeff had made by "Jesusno2") Aaron makes a whole bunch of other flanges as well. Turbo, KA24, SR20, etc... Perfect solution I'm a Site Engineer would be very happy to take a look at whats going on, PM me for contact information :) I most definitely want a couple of those flanges regardless! Link to comment
Bre620 Posted April 5, 2011 Report Share Posted April 5, 2011 also you make the stock exhaust manifold flange also for a Y pipe? http://community.ratsun.net/topic/30308-l-series-downpipe-flange-38-steel-20-shipped/page__gopid__455187?do=findComment&comment=455187 Link to comment
weirtech Posted April 6, 2011 Report Share Posted April 6, 2011 yeah, my site got hacked and is basically empty now... so i'm having to start from scratch again. no biggie. hopefully it will be back up in a couple weeks, i'm having someone different host it this time. in the mean time, since there is a bit of interest in these, i will get 10 cut (laser cut 3/8" mild steel) and put them on the shelf as stock. i can do them in different thickness and in 304ss as well, but the cost is about 4-5 times more. for 1/2" mild it would probably be closer to $40. does anyone have a pic of the oval port pattern or can clarify if it is much different than the one i posted the pic of? i can do any pattern, all i need is a cad drawing or a gasket if you have one you can mail. it would go back with your flange as well. currently we have about 150 different patterns ranging from turbo inlet and outlet flanges, to head flanges for honda's, nissan's, bmw's, vw's, audi's, subie's, toyota's, kia's, hyundai's, ford's, chevy's, mitsubishi's, chrysler's and everything in between. aaron Link to comment
Llittle_Llama Posted April 6, 2011 Author Report Share Posted April 6, 2011 How about I send you 50 for it and you can get the gasket from vatozone ;) since it will take 4-5 bucks to ship it to you and its like 7 dollars new might be much faster :) Link to comment
Llittle_Llama Posted April 6, 2011 Author Report Share Posted April 6, 2011 Oh, and personally I would prefer oval port. Link to comment
Llittle_Llama Posted April 19, 2011 Author Report Share Posted April 19, 2011 any updates guys? Link to comment
weirtech Posted May 17, 2011 Report Share Posted May 17, 2011 i've got 10 of these on the shelf ready to go... Link to comment
budsaipan Posted May 17, 2011 Report Share Posted May 17, 2011 Will you need to change the bolt/washers or anything if you use the 3/8" exhaust flanges with stock intake? Link to comment
weirtech Posted May 17, 2011 Report Share Posted May 17, 2011 i'm not sure, sorry i don't know these engines that well. can someone else chime in? aaron Link to comment
Llittle_Llama Posted May 18, 2011 Author Report Share Posted May 18, 2011 Well I no longer need one, I bought a long tube header on here and cut it up for what I needed. Link to comment
Recommended Posts