culowdragger72 Posted January 29, 2008 Report Share Posted January 29, 2008 i need one bad, if any has one just tell how much for it plus shipping. my zip is 92240 Link to comment
Pacific coast Datsun Posted January 29, 2008 Report Share Posted January 29, 2008 Sal you building a L 20? Hey call Guy he may have one for you. Link to comment
datzenmike Posted January 29, 2008 Report Share Posted January 29, 2008 Maybe an LZ22? Link to comment
culowdragger72 Posted January 31, 2008 Author Report Share Posted January 31, 2008 i'm havin the l20b thats in my 521 rebuilt and need a timing cover. its cracked by the dist. mounting holes so its no good. i need one bad. i want to drive it to forbidden fastacy show. i Hate trailoring cars to the show Link to comment
Pacific coast Datsun Posted January 31, 2008 Report Share Posted January 31, 2008 Ok gotcha Sal...may be ghetto but will JB weld fix the cracks? Link to comment
datzenmike Posted January 31, 2008 Report Share Posted January 31, 2008 For the cost of a used one have it TIG welded.??? Link to comment
phatdave Posted January 31, 2008 Report Share Posted January 31, 2008 http://cgi.ebay.com/ebaymotors/DATSUN-240Z-TIMING-COVER-260Z-280Z_W0QQcmdZViewItemQQcategoryZ33625QQihZ009QQitemZ190193853578QQrdZ1QQsspagenameZWDVW Don't the Z car covers fit? Link to comment
datzenmike Posted January 31, 2008 Report Share Posted January 31, 2008 I checked... the L24 and L28 were the same height as the L16 and L18 so both are about 20mm too short. Bleach would knoe the L26 deck. Link to comment
Datsun4u Posted January 31, 2008 Report Share Posted January 31, 2008 I have one for you. Just call me at the number on the e-mail I sent You. Best of all no S+H. Just pick it up. By the way, bring the 521. I would love to see it. Link to comment
banzai510(hainz) Posted January 31, 2008 Report Share Posted January 31, 2008 all the L series front covers are the same size(interchangeable) execpt the L20b(taller) L20 front Cover http://www.nissanparts.cc/cart/?pn=13501-u6000&submit.x=15&submit.y=3 Took a while to get also Link to comment
datzenmike Posted February 1, 2008 Report Share Posted February 1, 2008 Thanks Hainz, good to know. I did some calculating using the L26 piston and rod with the 207.85 deck and was close but not totally sure. Link to comment
culowdragger72 Posted February 1, 2008 Author Report Share Posted February 1, 2008 thanx guys for the info. i'm gonna go up to indio p/u the one Datsun4u has and have my neighbor Powder coat it along with other pieces in the engine bay. Link to comment
Recommended Posts