The datsun kid Posted November 11, 2010 Report Share Posted November 11, 2010 sooo.. i bought a 32/36 dgv conversion kit from webercarbsdirect.com for my 521 and i get it pretty quick and im super pumped and me and my cousin take the hitachi off and go to put the weber on and da fook!?!?! one of the holes on the base was drilled way off! i paid 270 bucks for this thing and one of the holes is drilled way off what the hell just thought id give you guys a heads up! argh now i have to send this dam thing back :angry: Quote Link to comment
UDunGooned2 Posted November 11, 2010 Report Share Posted November 11, 2010 Im thinking the way the carbs are machined its nearly impossible for the holes to have been drilled wrong.... Maybe you have a bent stud? Just sayin. 2 Quote Link to comment
elmerfudpucker Posted November 11, 2010 Report Share Posted November 11, 2010 bought mine from a redline dealer, $306 other than the vacuum leaks (jb weld on the adapter plates fixed it!) no problems here. Quote Link to comment
The datsun kid Posted November 11, 2010 Author Report Share Posted November 11, 2010 it came with the new studs it was definately off the gasket didnt even match up Quote Link to comment
UDunGooned2 Posted November 11, 2010 Report Share Posted November 11, 2010 it came with the new studs it was definately off the gasket didnt even match up Well maybe if the gasket didn't line up one of the new studs is messed up.... Just.... Sayin......... 2 Quote Link to comment
GERMS Posted November 11, 2010 Report Share Posted November 11, 2010 I just received my kit from an ebay vendor...came in one redline box really fast shipping...anyhow...the adapter is a two plate piece...I'll check mine tonight and see if everything fits right before I get too excited too XD Quote Link to comment
The datsun kid Posted November 11, 2010 Author Report Share Posted November 11, 2010 theyres no studs ON the carb! just sayin Quote Link to comment
nismo dr Posted November 11, 2010 Report Share Posted November 11, 2010 I smell a troll Quote Link to comment
banzai510(hainz) Posted November 11, 2010 Report Share Posted November 11, 2010 got a photo of the adapter plate? Quote Link to comment
FoxyRoadster Posted November 11, 2010 Report Share Posted November 11, 2010 try contacting the seller to make sure there wasnt a mistake? Quote Link to comment
Shonuff Posted November 11, 2010 Report Share Posted November 11, 2010 i dont see how there is room to have the hole that far off. 32/36 the 2 piece adapters are crap. you should sand down both sides of both pieces to be level, then sacrifice something and put it together and hope you dont break one of the pieces, and it doesnt leak and whistle. i also have had the threads not be straight or the studs fit loose and needed some convincing. i also demand pics Quote Link to comment
The datsun kid Posted November 12, 2010 Author Report Share Posted November 12, 2010 il show a pic tomorrow the carb still at my cousins and im not a troll or wat ever the hell that is im just not retarted! i know wats wrong with it. if you put the gasket to the carb and line everything up the one hole is covered almost halfway by the gasket oh and its a one piece adapter Quote Link to comment
Braden Posted November 13, 2010 Report Share Posted November 13, 2010 throw it in the gutter, go buy some dual mikunis, ask hainz how to tune them, then your set!!! Quote Link to comment
Duncan Posted November 13, 2010 Report Share Posted November 13, 2010 I'm thinking you have a 2pc adapter and it's assembled wrong, or you got the wrong kit for your car.. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.