Master-O-Turbonics Posted October 28, 2010 Report Share Posted October 28, 2010 actually that lever is identical to the one in my 74 260Z. Thats the only Z that had that particular lever. The that lever is:HERE 18415-N3601 Quote Link to comment
Farmer Posted October 29, 2010 Author Report Share Posted October 29, 2010 Does anyone know how much oil goes into the towers? Larry Quote Link to comment
Farmer Posted October 29, 2010 Author Report Share Posted October 29, 2010 Nevermind. I found the info that I needed, offsite Larry Quote Link to comment
Farmer Posted October 30, 2010 Author Report Share Posted October 30, 2010 Got the choke cables ran. Now for the throttle Larry Quote Link to comment
Skib Posted November 2, 2010 Report Share Posted November 2, 2010 didnt bother to pretty any of it up yet but it works and cost me nothing. Quote Link to comment
Pacific coast Datsun Posted November 2, 2010 Report Share Posted November 2, 2010 Get-r-done Skib ! Larry heres a better shot of my throttle setup,,low budget but it works....... Quote Link to comment
Skib Posted November 2, 2010 Report Share Posted November 2, 2010 Ill get around to smoothing the welds and painting it all one day :rofl: but it works great :cool: Quote Link to comment
Skib Posted November 2, 2010 Report Share Posted November 2, 2010 where did you find those super thin filters PCD? Quote Link to comment
hooliganPL620 Posted November 3, 2010 Report Share Posted November 3, 2010 i have k&n's just like those Quote Link to comment
zerow Posted November 3, 2010 Report Share Posted November 3, 2010 where did you find those super thin filters PCD? You can use the Empi 8957s instead of the Empi 8970s, and my writeup for the SU Air Cleaners... Quote Link to comment
Skib Posted November 3, 2010 Report Share Posted November 3, 2010 You can use the Empi 8957s instead of the Empi 8970s, and my writeup for the SU Air Cleaners... I did use your write up :lol: it worked great but they didnt have the smaller filters and I have ram mine back in there to get it on lol do you have a part number for the just air filter itself? Quote Link to comment
Pacific coast Datsun Posted November 3, 2010 Report Share Posted November 3, 2010 where did you find those super thin filters PCD? Those filters were put on by the PO. He told me they are for a lawnmower & i think hes right. The holes on the inner housing have been drilled out to accept bigger bolts. I ditched them & made some short stacks instead :D Quote Link to comment
zerow Posted November 3, 2010 Report Share Posted November 3, 2010 I did use your write up :lol: it worked great but they didnt have the smaller filters and I have ram mine back in there to get it on lol do you have a part number for the just air filter itself? The filter comes with the metal housing, so no separate P/N... But... If you are feeling adventureous, go and see if the Wix 42032 =OR= the Wix 42375 will work. These are ones that I have researched, but not gotten around to testing. If they do work, I will amend my writeup using any pics that you have showing that they work in a 620 truck. :) Quote Link to comment
Skib Posted November 4, 2010 Report Share Posted November 4, 2010 Ill go check that tomorrow :lol: Quote Link to comment
zerow Posted November 4, 2010 Report Share Posted November 4, 2010 Ill go check that tomorrow :lol: Let me know :) Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.