kurt appley Posted July 12, 2010 Report Share Posted July 12, 2010 I have come up with 2 transmissions that will bolt up to a L serie's engine. First is supposed to be out of a mid 70's Z car. Second is a mystery to me. It has a pan on it like a auto trans has. What have I got and is one better than the other? Tnx, Kurt. Quote Link to comment
Skib Posted July 12, 2010 Report Share Posted July 12, 2010 quick! to the Datzenmike signal! douchbag! Quote Link to comment
datzenmike Posted July 12, 2010 Report Share Posted July 12, 2010 I'm here, I'm here. You should post a picture of them. The one with the pan is very likely an F4W63. If it's 26" long it's from a 510 or early 620. If longer it could be from a 610/710. The one from the mid 70s is likely an F4W71B and is the stronger of the two. Again this is a best guess without pictures. Posting pictures on line Quote Link to comment
I'm BLUE Posted July 12, 2010 Report Share Posted July 12, 2010 quick! to the Datzenmike signal! douchbag! :rofl: it worked :w00t: Quote Link to comment
kurt appley Posted July 12, 2010 Author Report Share Posted July 12, 2010 I was told that both were 5 speed's. The one with the pan is bolted to a L20 in a truck so pics would be a little difficult. I will measure best as I can. I have the worlds slowest dial-up and picture's are a pain. Thanks, Kurt. Quote Link to comment
LenRobertson Posted July 12, 2010 Report Share Posted July 12, 2010 datzenmike - If it has a bottom pan and will bolt up to an L engine, isn't it a 4-speed? Or is there a 5-speed-with-a-pan I haven't run across? Len Quote Link to comment
datsunaholic Posted July 12, 2010 Report Share Posted July 12, 2010 There aren't any 5-speeds with pans. 2 different 4-speeds had pans- F4W63 (used in all 521s, 68-73 510s, 73-75 610s, and '73 620s) and F4W63L (used in '74-77 710s and 78-81 510s). Anyone want to take a bet that BOTH transmissions are 4-speeds? "Mid 70s Z-car" trans could easily be a 4-speed as all 74-76 Zs had 4-speeds as the only manual, and 4-speeds were standard on the rest of the years (70-78). Quote Link to comment
Skib Posted July 12, 2010 Report Share Posted July 12, 2010 on the Z car one look at the top right infront of the shifter. if theres a 6 bolt plate there its a 4 speed but if its smooth with a ridge than its a 5 speed. Quote Link to comment
datzenmike Posted July 12, 2010 Report Share Posted July 12, 2010 He doesn't mention that they are different lengths so I assume they are both longs (31.5") This makes it a later F4W63(L?) Probably like this: F4W71B used after '74 and at least till '83 on the 720. Note the 6 bolt rectangular cover plate with round breather just forward of the shifter as skib mentioned. The FS5W71B 5speed didn't come out until '77 model year 280z and 620. . Quote Link to comment
kurt appley Posted July 13, 2010 Author Report Share Posted July 13, 2010 Well Lots of good info from you guys and, yes, I got screwed!! The trans with the pan is a 4 speed but the other is a 5. The 4 speed trans came from a e-bay screw up that involved the guy begging for his money and me caving. When I went to get it he was long gone and a friend who knew little helped me. I knew it was a scew job at the time and, he got me good. In the future I'll ask here first!! Thanks, Kurt. Quote Link to comment
datzenmike Posted July 13, 2010 Report Share Posted July 13, 2010 This is an F4W71B 4 speed: These are FS5W71B 5 speeds: Check carefully. If not exactly like the pictures it could be another 5 speed. A picture could really help as there is a 5 speed that is from a Z series motor and although it will bolt up to an L series it will sit leaning to the right side with the shifter in the passenger seat. Quote Link to comment
LenRobertson Posted July 13, 2010 Report Share Posted July 13, 2010 Okay, so I'm in the shower tonight, where I do my best thinking - maybe water falling on my head stimulates brain cells or something. Anyway, I'm thinking of "Real World" situation trans ID - you are at Pull n Save and find an L engined something (620, 720, Z, later 510, whatever). No way of knowing if the PO may have swapped trannys, and the shift lever is gone (those seem to disappear pretty fast at P&S for some reason), so you can't even run through the shift pattern. Is it 4-speed or 5-speed? You look under and it has a pan, it's a 4, and you don't care if it is long or short. Or, you look under and see no pan, and start getting excited. Reach up on top ahead of the shifter and feel the dreaded flat plate and six bolts. Curses, foiled again, another 4-speed. If you don't feel plate/6 bolts, oh joy, it's a 5-speed? Is it really this simple, or are there some other style 4-speeds lurking out there? Len Quote Link to comment
datzenmike Posted July 13, 2010 Report Share Posted July 13, 2010 Okay, so I'm in the shower tonight, where I do my best thinking - maybe water falling on my head stimulates brain cells or something. Anyway, I'm thinking of "Real World" situation trans ID - you are at Pull n Save and find an L engined something (620, 720, Z, later 510, whatever). No way of knowing if the PO may have swapped trannys, and the shift lever is gone (those seem to disappear pretty fast at P&S for some reason), so you can't even run through the shift pattern. Is it 4-speed or 5-speed? You look under and it has a pan, it's a 4, and you don't care if it is long or short. Or, you look under and see no pan, and start getting excited. Reach up on top ahead of the shifter and feel the dreaded flat plate and six bolts. Curses, foiled again, another 4-speed. If you don't feel plate/6 bolts, oh joy, it's a 5-speed? Is it really this simple, or are there some other style 4-speeds lurking out there? Len Len, you see this picture? ...one is an L and one is a Z series. Can you feel the difference????? Seriously, you're right, a 5 speed could be on any L motor so you have to check them all. To answer your question there is another 4 speed out there called an F4W71A used on the early Z car. There is also a 3 speed standard. There are 2 different early Z car competition 5 speeds, and 3 production 5 speeds that will bolt to the L series. Add to that the KA 5 speed can be 'converted' with a bell swap to fit the L series. Nismo makes at least 4 competition direct drive 5 speeds with 5th gear straight through one to one ratio like the 4 speed. Quote Link to comment
LenRobertson Posted July 13, 2010 Report Share Posted July 13, 2010 ...one is an L and one is a Z series. Seriously, you're right, a 5 speed could be on any L motor so you have to check them all. To answer your question there is another 4 speed out there called an F4W71A used on the early Z car. There is also a 3 speed standard. Yeah, in my fantasy trip to Pull n Save, I was hoping I didn't run into something like a late '70s 510 with the engine gone and have to figure out if it had an L or Z20 in it. There is probably a way to look at something like the level of the top bolt holes (with the trans in the vehicle and no engine) and tell if it has an L or Z bell housing. I'll have to pay attention to that at P&S. So how do you ID this F4W71A box? Again, the game is the tranny is in the car and the shift lever is long gone. And what on earth did the 3-speed come in? Did it have a pan? Len Quote Link to comment
datzenmike Posted July 13, 2010 Report Share Posted July 13, 2010 FS5W71B top and F4W71A from early 240z. I think they are a Roadster tranny with an special L bell for use on the L series motor. The 510/520 had a 3 speed column shift. You don't see too many. . Quote Link to comment
kurt appley Posted July 13, 2010 Author Report Share Posted July 13, 2010 datzenmike: My 5 speed looks like the top one in your first photo. Nothing too weird- came with a short shift lever that had a sort of pistol grip knob but shift gate location was missing on it. The 4 speed did'nt have a lever. Sloppy shift mechanism--almost glad I can't use it. Thanks again, Kurt. Quote Link to comment
datzenmike Posted July 13, 2010 Report Share Posted July 13, 2010 Just curious... was the 4 speed about the same length? Quote Link to comment
kurt appley Posted July 15, 2010 Author Report Share Posted July 15, 2010 Datzenmike, did you get my post on the 4sp being about 5" shorter than the 5sp. Thanks for the bearing fix info as well. Kurt. Quote Link to comment
datzenmike Posted July 15, 2010 Report Share Posted July 15, 2010 Guess not. The F4W63 4spd is likely 26.3" long so likely from a 510 or earliest 620. If it had a flange output and the drive shaft bolts to it, it's from a 521. Quote Link to comment
kurt appley Posted July 18, 2010 Author Report Share Posted July 18, 2010 Looked like the trans had always been attached to the L20 so must have been from a 510. Standard slide drive shaft output. Kurt. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.