My 5 Yr Project Datsun 510

[fo0manchu]

Dont use the starter wire. That shows 12v when cranking only. Do you have a volt meter? If not, this would be a great time to learn how to use one. That way if you have to trouble shoot anything electrical in the future, you will know how to do it. You can pick one up for not much. According to this: http://community.rat...res#entry770838 you will use the black/white wire that will trigger the relay.

[ztommyx510]

sorry been busy for a little while..

just had a baby a week ago and then just finish some of the wirings.

 

i wish i can just grab icehouse's can/am box, but i'm just about finish wiring up my own can/am box lol

actually, the wires are everywhere!

 

here's where i got stuck:

-the 4th wire BLUE/RED, i cannot find it. is it used?

plus, i have yet to get to the ignition switch and ign switch "on". what wire are that off of?

[ztommyx510]

just a small update

just finishing up the wirings. cross my fingers i did it right

 

 

 

 

i am stumped on the 3 relay i just wired up... as the wire harness i sent out to DGR had the fuel pump wirings and relay already on it (see above pic w/ green relay).

now do i just eliminate the 3rd relay on the diagram? i did eventually re-wire the 3rd relay just in case?

[ztommyx510]

this is just an exterior shot of what my dime would look like

new look front end mock-up. painted satin black.

 

before headlight and center grille

 

the new look

 

eventually the car will be painted in a different color (still undecided)

but the front will likely remain satin black.

[mattyhacks71]

That front end looks super clean :thumbup:

[ztommyx510]

^^ thanks.

recently i've move the "datsun" badge down and polished and painted the headlight bezels.

 

 

still waiting for others to chime in on my questions above (about the wirings).

[Dlip]

Hey i'm using that front end picture as my wallpaper!!!

Looks sooo CLEAN!!

[Silver04rs]

Keep with it

 

Lots of hard things to do but in time you will be glad you did

[ztommyx510]

hmm.. i guess i'm on my own now...

 

here is the 99% finish front look:

 

although it did not start, the car cranks! whohoo!!

 

will be finalizing the wirings, put in fuel and coolant on the weekend, hopefully.

[mrbigtanker]

Wow very very clean.Start up video please.

[ztommyx510]

^^ almost there.

i actually cranked it... just not fired up since there was no gas or coolant.

 

just bought this for cheap. a little dirty but should clean up real nice. :)

 

[ztommyx510]

my corbeau seat, finally cleaned up a little.


bought new wheels

hint: 16x7 +6 (3" lip)

test fitted and they fit perfect


 

[ztommyx510]

fast foward almost a year...

 

start up video!

 

[Dirttrack510]

Video no worky... :(

[ztommyx510]

hmm...

 

http://s663.photobucket.com/user/KOUKI_S14/media/1211531_10152012365472835_866119814_n_zps47cee723.mp4.html