MicroMachinery Posted April 28, 2010 Report Share Posted April 28, 2010 Hey, so I'm pokin' around, curious if there are any SU carb setups out there that people are not using, or wanting to get rid of. Anyone have a decent set that they'd let go of for a ratsun price? I'd need the carbs, manifold, and cleaner(s) if you got em. PM me with whatcha got. Thanks! Link to comment
MicroMachinery Posted April 29, 2010 Author Report Share Posted April 29, 2010 Hey, so I'm pokin' around, curious if there are any SU carb setups out there that people are not using, or wanting to get rid of. Anyone have a decent set that they'd let go of for a ratsun price? I'd need the carbs, manifold, and cleaner(s) if you got em. PM me with whatcha got. Thanks! Apparently, the fine print was too fine for some, so I enlarged and underlined the parts that weren't read. <_< Link to comment
dgi Posted May 1, 2010 Report Share Posted May 1, 2010 Hey, so I'm pokin' around, curious if there are any SU carb setups out there that people are not using, or wanting to get rid of. Anyone have a decent set that they'd let go of for a ratsun price? I'd need the carbs, manifold, and cleaner(s) if you got em. PM me with whatcha got. Thanks! I've got a K14 manifold, isolators, heat shield, and 2 45mm round top Z carbs with the necessary linkage setup for a throttle cable, and 2 round 3" filters with chromed covers. This is a 38mm manifold slightly (and poorly) ported to match the carbs. Don't know how good they are, I've never used them and don't plan to. Will definitely need gaskets on both sides of the isolators. What do you think the Ratsun price should be? Link to comment
MicroMachinery Posted May 2, 2010 Author Report Share Posted May 2, 2010 Guess I'm not sure what a K14 manifold is.. that setup seems pretty experimental. I'm looking for something I can bolt on. If it were a setup that needed to be cleaned or rebuilt, that'd be one thing. This sounds like a gamble. I may be interested in the manifold if it's not too butchered. Link to comment
ppeters914 Posted May 3, 2010 Report Share Posted May 3, 2010 There were two SU manifolds for L-motors; K14 and 220. Here's a pic of the 220: Dunno what the differences are, other than the K14 has 'K14' cast into the manifold....duh. Link to comment
Datson 200B GX Posted May 4, 2010 Report Share Posted May 4, 2010 There were two SU manifolds for L-motors; K14 and 220. Here's a pic of the 220: Dunno what the differences are, other than the K14 has 'K14' cast into the manifold....duh. ppeters914 how much do you want for the manifold? Link to comment
dgi Posted May 4, 2010 Report Share Posted May 4, 2010 that setup seems pretty experimental. I'm looking for something I can bolt on. If it were a setup that needed to be cleaned or rebuilt, that'd be one thing. It is a bolt-on... use Z carbs on a 4 cyl. Probably best used with an L20B, might be too much for an L16 on the street. However, we used to run them on our race L16s back in the day. In fact, I believe these were last used on a "vintage" race car. I have them only because I bought a pickup truck load of 510 parts from an old SCCA friend. Link to comment
zerow Posted May 4, 2010 Report Share Posted May 4, 2010 There were two SU manifolds for L-motors; K14 and 220. Here's a pic of the 220: Dunno what the differences are, other than the K14 has 'K14' cast into the manifold....duh. The 220 manifold is more desireable. It does not have any smog ports on it. The K14 manifold has smog ports on it, namely the big needle screw thing in the center to adjust for air into the manifold. I had some pic posted a while back on how to "desmog" the manifold. I will have to find it... Ahhh, here we go... Good luck with the hunt. It seems that they are showing up more and more lately. The air cleaners are an easy fab, too... http://community.ratsun.net/topic/5294-su-air-cleaners-for-a-ratsun-price/ Link to comment
ppeters914 Posted May 4, 2010 Report Share Posted May 4, 2010 ppeters914 how much do you want for the manifold? I just knew where that pic was. I don't have one for sale. Link to comment
CorAce Posted May 5, 2010 Report Share Posted May 5, 2010 I got a full set of 38mm flat tops, untested but complete. pm me if your interested. I'll send pics. Link to comment
MicroMachinery Posted May 5, 2010 Author Report Share Posted May 5, 2010 Thanks man, but I'm looking for some round tops. Link to comment
banzai510(hainz) Posted May 5, 2010 Report Share Posted May 5, 2010 datson200 BGX look on OZdat forums and classifieds. Be closer to you. olddatsuns.com Link to comment
zerow Posted May 5, 2010 Report Share Posted May 5, 2010 I got a full set of 38mm flat tops, untested but complete. pm me if your interested. I'll send pics. Thanks man, but I'm looking for some round tops. Flat tops can be converted... http://www.jetlink.net/~okayfine/SU/tunacan.html Link to comment
mazdat Posted May 5, 2010 Report Share Posted May 5, 2010 Hey, so I'm pokin' around, curious if there are any SU carb setups out there that people are not using, or wanting to get rid of. Anyone have a decent set that they'd let go of for a ratsun price? I'd need the carbs, manifold, and cleaner(s) if you got em. PM me with whatcha got. Thanks! Call Mario, he has a complete set except the air cleaner I believe, call him @ 3235594181 Link to comment
mazdat Posted May 5, 2010 Report Share Posted May 5, 2010 Hey, so I'm pokin' around, curious if there are any SU carb setups out there that people are not using, or wanting to get rid of. Anyone have a decent set that they'd let go of for a ratsun price? I'd need the carbs, manifold, and cleaner(s) if you got em. PM me with whatcha got. Thanks! Call Mario, he has a complete set except the air cleaner I believe, call him @ 3235594181 Link to comment
MicroMachinery Posted May 9, 2010 Author Report Share Posted May 9, 2010 He sold them :( Link to comment
MicroMachinery Posted August 10, 2010 Author Report Share Posted August 10, 2010 Still lookin'... Link to comment
I'm BLUE Posted August 10, 2010 Report Share Posted August 10, 2010 Still lookin'... PM'd ya :D I only have the 240z Round Top carbs ( 2 sets ) , no 4cyl manifold ( one set comes with s30 manifold ), I have 240z air cleaner Link to comment
Recommended Posts