S@nt0s Posted October 4, 2009 Report Share Posted October 4, 2009 (edited) got around to doing a few things this week and this section of ratsun needs some movement enough with the tits :P today i mocked up the motor in the bay, needs some minor things but looks like i will have to do a tranny tunnel so i will be cutting away here soon..... :lol: mounted my intake manifold my material for my turbo manifold, i will mock up and make it once the motor is sitting where it needs to be. and today as she sits Edited October 4, 2009 by datzenmike Quote Link to comment
mazdat Posted October 5, 2009 Report Share Posted October 5, 2009 whats up Santos, looking good, make sure you post pics of the progress of the engine....did you go to JCCS? Quote Link to comment
S@nt0s Posted October 5, 2009 Author Report Share Posted October 5, 2009 ya i was there, i was sick as a dog fri and dragged my ass out of bed to make it to JCCS and checked everything out thats about it. ill post pics later... Quote Link to comment
Nissan_Boy85 Posted October 5, 2009 Report Share Posted October 5, 2009 got around to doing a few things this week and this section of ratsun needs some movement enough with the tits :P But you know you like it. :D Lookin good! Can't wait to see progress. Quote Link to comment
S@nt0s Posted October 7, 2009 Author Report Share Posted October 7, 2009 today i installed the side rear glass back on, mounted the FMIC and radiator to check clearances. Quote Link to comment
fisch Posted October 7, 2009 Report Share Posted October 7, 2009 This will be one hell of a ride Santos! Super cool! (Heh, I know it prolly isn't staying, but like that spare tire on there! I dig skinny tires.) Quote Link to comment
S@nt0s Posted October 7, 2009 Author Report Share Posted October 7, 2009 thanx, i have no choice since no $ for the front wheels yet..... i just want to get the thing running and tuned and if need be i can borrow some front runners but i am looking to have it running by the new year... Quote Link to comment
S@nt0s Posted October 8, 2009 Author Report Share Posted October 8, 2009 began the mock up for the manifold today Quote Link to comment
S@nt0s Posted October 20, 2009 Author Report Share Posted October 20, 2009 here is a picture before the final mock up i finished last night. i will complete it this week and will update then... and a peak at whats to come for 2010... Quote Link to comment
808DA6 Posted October 20, 2009 Report Share Posted October 20, 2009 Wait a minute!!?!?!?! Was that pic taken at some "Area 51" neighborhood that your pop, Mr. Toyota, doesn't know about? hahaha! -Brian Quote Link to comment
S@nt0s Posted October 20, 2009 Author Report Share Posted October 20, 2009 LOL no..... actually my dad wanted to hang out the night before but we werent doing anything... these guys are all good friends of ours like family.... :P Quote Link to comment
S@nt0s Posted October 27, 2009 Author Report Share Posted October 27, 2009 started the tunnel today and swaping my bell housing manifold is complete, but need to clean up some welds as i was having a bad day, but for the most part is done just needs the wastegate elbow. and a little teaser for you.... :mrgreen: Quote Link to comment
NZDatsunchris Posted October 27, 2009 Report Share Posted October 27, 2009 Gutted have you ditched the CA18?? Quote Link to comment
motavated Posted October 27, 2009 Report Share Posted October 27, 2009 Geez! WHAAATTTT! How did I miss this? Nice work man! Quote Link to comment
S@nt0s Posted October 28, 2009 Author Report Share Posted October 28, 2009 ACT stage 5 mounted today... still playing with the tranny tunnel. hope to have it buttoned up by the weekend Quote Link to comment
S@nt0s Posted October 28, 2009 Author Report Share Posted October 28, 2009 as my dad would say " llego el Truck" ( " the truck has came " ) -8 fuel line 20ft 850cc injectors, Fuel rail Fuel Pump blow off valve power TB 75mm for a mustang ( flange made by my dad Santos Turbo ) Lug nuts front wheels as they will look rears came in Quote Link to comment
S@nt0s Posted October 29, 2009 Author Report Share Posted October 29, 2009 another stop by the truck today and left my front runners... Quote Link to comment
S@nt0s Posted October 31, 2009 Author Report Share Posted October 31, 2009 today i mounted the new rims and tires... here is the final of the manifold i made... just need to place the wastegate elbow... Quote Link to comment
S@nt0s Posted November 2, 2009 Author Report Share Posted November 2, 2009 today i attacked the intake manifold to weld the mustang flange for the 75mm TB.... went from this to this.. Quote Link to comment
S@nt0s Posted November 3, 2009 Author Report Share Posted November 3, 2009 finally finished the manifold , had to do the wastegate elbow... and another stop by the ups/fed ex truck... :lol: Hello Kevlar.... Quote Link to comment
mazdat Posted November 5, 2009 Report Share Posted November 5, 2009 its looking bad ass Santos!!!:D:D, nice weld beads!!, are you doing the fabs and welding yourself? Quote Link to comment
S@nt0s Posted November 7, 2009 Author Report Share Posted November 7, 2009 thx... and yes i am doing all the fab myself..... Quote Link to comment
S@nt0s Posted November 8, 2009 Author Report Share Posted November 8, 2009 today i modified the crossmember after having to move the motor foward and did the tranny crossmember.... started piecing the tranny tunnel back... Quote Link to comment
ggzilla Posted November 10, 2009 Report Share Posted November 10, 2009 ah the old Australia B210 front turn signal lights swap Santos those wheels look awesome! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.