sick620 Posted September 1, 2009 Report Share Posted September 1, 2009 how do u remove the dash piece that gos around the gauges and radio. or does it even come off? i just got some carbon fiber film to make it carbon fiber but it doesn't look like it comes off. Quote Link to comment
BEEBANI Posted September 1, 2009 Report Share Posted September 1, 2009 In case you didn't search, make sure you give it a try next time, this has been answered a few times. You have to remove the cigarette lighter, it holds this piece to the dash frame. Then there are a couple screws that go upward inside of the gauge areas. I believe that's all there is to it. Remember, if it doesn't feel like it's coming easily; don't force it. I broke mine the first time because I didn't know about the lighter. Quote Link to comment
sick620 Posted September 1, 2009 Author Report Share Posted September 1, 2009 thanks. ya ill search next time.... i will post pics when its all carbon fibered.:) Quote Link to comment
Orange620 Posted September 1, 2009 Report Share Posted September 1, 2009 (edited) There is one screw in the top of each instrument bezel (3). There is also a screw right below/behind the gas gauge. The cigarette lighter is usually a bitch. To remove the knobs on the switches, you push in on them then make a quarter turn(counterclockwise I think). The heater control lever knobs are held on by a small phillips screw underneath. Edited September 1, 2009 by Orange620 Quote Link to comment
Jester Posted September 1, 2009 Report Share Posted September 1, 2009 There are also two small screws under the dash on mine. One behind the fuse box and one that holds the Light for the fiber optics can. These go through a bracket that comes off the dash to keep it from rattling. Quote Link to comment
sick620 Posted September 2, 2009 Author Report Share Posted September 2, 2009 how do u remove the cigg lighter?????????? it is a bitch Quote Link to comment
datsunaholic Posted September 2, 2009 Report Share Posted September 2, 2009 Through the radio hole, with medium channel locks or really small, strong fingers. Quote Link to comment
sick620 Posted September 3, 2009 Author Report Share Posted September 3, 2009 god removing the ciggerrete lighter is a fucking bitch. it pushes out from the back into the cab right? and what about the window wiper knob?:( Quote Link to comment
420n620 Posted September 3, 2009 Report Share Posted September 3, 2009 for the window wiper knob you pull it out then take a pair on needle nose plyers to hold the shaft and then push in the knob and turn 1/4 turn. Quote Link to comment
Braden Posted September 3, 2009 Report Share Posted September 3, 2009 dont give up man it can be done, i got some small pliers through the radio hole and twisted my cig lighter right off, be sure to put something on the threads of it when your done, i used anti sieze so next time i can do it by hand :) yes the cig lighter you remove the wire and then unscrew it and the it pushes out towards the cab, like they all said dont force it, 30 year old plastic isnt too sturdy and if you live somewhere like me you cant just go down to the yard and get a new one, good luck Quote Link to comment
sick620 Posted September 14, 2009 Author Report Share Posted September 14, 2009 i finally got the bastard off. there is 1 bolt for each gauge hole. there is 1 on the fuse box. there are 2 behind the dash that hold the gauges in place. you cant reall see them unless you know where the are. theres the cig lighter, window wiper, and heater knobs. i cracked it a little while taking it off but i dont care cuz im putting that carbon fiber stuff on it. ill get pics up soon Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.