Dat620guy Posted August 31, 2009 Author Report Share Posted August 31, 2009 :lol::lol::lol::lol: Quote Link to comment
Ricky116 Posted September 1, 2009 Report Share Posted September 1, 2009 Well I know its not what you guys want but its free.... I go that rear slider if you want to take it out you can have it and the seal Quote Link to comment
fattodatto Posted September 1, 2009 Report Share Posted September 1, 2009 take i out and put it in the TRASH we will get you some kevin Quote Link to comment
78kingcab Posted September 1, 2009 Report Share Posted September 1, 2009 (edited) well i was thinking my truck isnt going out side any more this year, i could loan ya my rear windows till you get some ..there comming out anyway to paint...let me know:fu::fu::fu: its raining out Edited September 1, 2009 by 78kingcab Quote Link to comment
Dat620guy Posted September 2, 2009 Author Report Share Posted September 2, 2009 I might do that then. Thanks for the help guys.:) Quote Link to comment
Dat620guy Posted January 13, 2010 Author Report Share Posted January 13, 2010 Well it's about time to bring this up to date. Motors in pretty much all hooked up. The front clip is coming together. Still have a ways to go on her but i'm hoping to have her on the road for Canby. I just need to hunt down some more parts. Quote Link to comment
lynchfourtwenty Posted January 13, 2010 Report Share Posted January 13, 2010 damn, i thought you sold your engine? or is that a different one? do you still have the xterra wheels? or whatever they were? i moved to washougal, an now have my own gayrage Quote Link to comment
Dat620guy Posted January 13, 2010 Author Report Share Posted January 13, 2010 damn, i thought you sold your engine? or is that a different one? do you still have the xterra wheels? or whatever they were? i moved to washougal, an now have my own gayrage Its the same engine minus the carb. It needs a carb now. I do have those Xterra wheels still. Just no tires for them. Now that you have your own garage no more working out in the rain or whatever. I know you had that carport but it wasn't enough. Quote Link to comment
lynchfourtwenty Posted January 13, 2010 Report Share Posted January 13, 2010 ya its not a huge garage but big enough to do what i need Quote Link to comment
Dat620guy Posted January 29, 2010 Author Report Share Posted January 29, 2010 Went to the wrecking yard yesterday and today. Found some parts I needed and some I couldn't help but buy. So I picked up a Weber carb, 2 72-77 grills (one has the rings the other doesn't), 2 grill emblems, fuel pump block off, a straight front bumper, 2 radiator overflow tanks, a valve cover that says Datsun on it instead of Nissan, dome light assy for my KC, hood hinges, 2 wiper arm sets, and 2 front sway bars one for the older 620s and one for the 78-79 models. Good finds in my opinion. Quote Link to comment
lynchfourtwenty Posted January 29, 2010 Report Share Posted January 29, 2010 i need some of those bumper bolts .. u know the round topped ones.. u gotz extraz? Quote Link to comment
Dat620guy Posted January 29, 2010 Author Report Share Posted January 29, 2010 i need some of those bumper bolts .. u know the round topped ones.. u gotz extraz? I'll look at my bolt collection. Quote Link to comment
lynchfourtwenty Posted January 29, 2010 Report Share Posted January 29, 2010 cool, im missin all 4 front ones, dont tell no one tho. lol :P believe it or not i had all 4 when i got the truck, those sumbitches rattled out over time, just lost my last one recently.. Quote Link to comment
Dat620guy Posted January 29, 2010 Author Report Share Posted January 29, 2010 cool, im missin all 4 front ones, dont tell no one tho. lol :P believe it or not i had all 4 when i got the truck, those sumbitches rattled out over time, just lost my last one recently.. oh! well if I don't have any extra I know where 4 more bumpers are. :lol: :lol: Quote Link to comment
lynchfourtwenty Posted January 29, 2010 Report Share Posted January 29, 2010 nice! Quote Link to comment
TrevDaddy Posted January 29, 2010 Report Share Posted January 29, 2010 I recently had some trouble with those bolts you speak of. They are metric (m6) carriage bolts made of unobtainium. I simply switched over to standard, should do the trick. They are about an inch long, I'll show you updates in this thread pretty soon: http://community.ratsun.net/topic/18639-bumper-and-grille-restoration/page__p__259345__fromsearch__1&?do=findComment&comment=259345 Quote Link to comment
Dat620guy Posted January 29, 2010 Author Report Share Posted January 29, 2010 I recently had some trouble with those bolts you speak of. They are metric (m6) carriage bolts made of unobtainium. I simply switched over to standard, should do the trick. They are about an inch long, I'll show you updates in this thread pretty soon: http://community.ratsun.net/topic/18639-bumper-and-grille-restoration/page__p__259345__fromsearch__1&?do=findComment&comment=259345 Yeah i've seen some bad ones. The four i've collected are in really nice shape. the bumper I just picked up has had them replaced with the raw metal ones. Quote Link to comment
Dat620guy Posted February 26, 2010 Author Report Share Posted February 26, 2010 Just a quick update so DatsuNoob can see his old wheels on my truck now. Quote Link to comment
Guest DatsuNoob Posted February 26, 2010 Report Share Posted February 26, 2010 Lookin classy :cool:, I've looked at my truck with no bed on it for so long they almost look strange to me when there all put together :lol:. Thanks again for helping me set mine on. Hoping to see ya and your truck at Canby(hope I'll get there too with mine :unsure: ) Quote Link to comment
lynchfourtwenty Posted February 26, 2010 Report Share Posted February 26, 2010 ya, thanks for sendin him w/ that stuff :P Quote Link to comment
Dat620guy Posted February 26, 2010 Author Report Share Posted February 26, 2010 Lookin classy :cool:, I've looked at my truck with no bed on it for so long they almost look strange to me when there all put together :lol:. Thanks again for helping me set mine on. Hoping to see ya and your truck at Canby(hope I'll get there too with mine :unsure: ) She should be ready for Canby. That's my goal right now. I know what you mean about the bed thing. Mine has been that way for a bit too and now i'm used to it that way. Hey I think you'll have that truck goin by then. It didn't look to far off from running in my opinion. :cool: Quote Link to comment
Guest DatsuNoob Posted February 26, 2010 Report Share Posted February 26, 2010 Yeah, we'll see. I know I'll get a buncha shit if it doesnt make it, but I dont want to rush things and not go into the depth I want of the build just to meet a deadline. All the stuff I want/am doing costs a pretty good chunka coin Quote Link to comment
Dat620guy Posted February 27, 2010 Author Report Share Posted February 27, 2010 Yeah, we'll see. I know I'll get a buncha shit if it doesnt make it, but I dont want to rush things and not go into the depth I want of the build just to meet a deadline. All the stuff I want/am doing costs a pretty good chunka coin I totally understand. I'm starting the body work so I can get it painted. I keep finding more and more to fix, but the end result should be how I want it or close to. :lol: Plus the money bit. It's spent as soon as I get it in hand on this beast. Quote Link to comment
Dat620guy Posted March 2, 2010 Author Report Share Posted March 2, 2010 Well just came in from the garage to take a break for a few. Been trying to get the sanding and bodywork done. Funny how when you get into it you keep finding more and more to fix. :lol: But i'm not complaining. I just want it to turn out good. Went to Bob's Paintland and bought some supplies and had the paint color mixed that i'm going to use for one of the colors on it. Picked up a long board as well, so i can get the doors and cab straight. Also here is some progress pics of the truck. I know all of us ratsuners love the pics. :lol: Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.