Skib Posted March 23, 2009 Report Share Posted March 23, 2009 its worth a try. if you sand blast it then you will need to resurface it for sure :eek: that will just gouge a machined surface it dosent NEED to be done, I would just do it personally. It was working perfectly fine in my daily driver 240 Link to comment
ariascarlos1990 Posted March 23, 2009 Author Report Share Posted March 23, 2009 how much does napa charge? Link to comment
Skib Posted March 23, 2009 Report Share Posted March 23, 2009 how much does napa charge? not to much, I dropped mine off and left a $34 down on it, itl prob come out to 60-70 when I pick it up. not sure yet tho, depends on how much work it needs. Link to comment
motavated Posted March 23, 2009 Report Share Posted March 23, 2009 WTF are they serious? I bought my clutch Thursday for 112. Exedy and a resurfaced flywheel. Link to comment
Skib Posted March 23, 2009 Report Share Posted March 23, 2009 WTF are they serious? I bought my clutch Thursday for 112. Exedy and a resurfaced flywheel. thats just a guess, Im not sure what itl come out too till I get it. I didnt bother asking Link to comment
ariascarlos1990 Posted March 23, 2009 Author Report Share Posted March 23, 2009 we'll when I get the flywheel ill go down there and get a quote. Link to comment
Skib Posted March 23, 2009 Report Share Posted March 23, 2009 we'll when I get the flywheel ill go down there and get a quote. good idea, cuz it dosent have to be done, I just like to put things in fresh when I can. Link to comment
ariascarlos1990 Posted March 23, 2009 Author Report Share Posted March 23, 2009 yeah same here. You go to the portland meets right? maybe I could get it from yah there. Link to comment
Skib Posted March 23, 2009 Report Share Posted March 23, 2009 yeah same here. You go to the portland meets right? maybe I could get it from yah there. I usually do, Im hoping to have the turbo up and going for next weeks meet Link to comment
ariascarlos1990 Posted March 24, 2009 Author Report Share Posted March 24, 2009 maybe I can pick it up from you then. or when you go to PIR. Link to comment
ariascarlos1990 Posted March 24, 2009 Author Report Share Posted March 24, 2009 all right ill keep you posted. thanks again. Link to comment
freaky510 Posted March 24, 2009 Report Share Posted March 24, 2009 get a hold of Otts friction there in Portland they redid my clutch and flywheel for me i went with a kevlar re-pucked clutch and they reworked my pressure plate and resurfaced my flywheel all for a 150......... its what they do, i guarantee a way better job than any napa shop Link to comment
ariascarlos1990 Posted March 24, 2009 Author Report Share Posted March 24, 2009 I already have a clutch I just need a flywheel. ill look into those guys though. How much was it to resurface your flywheel? Link to comment
athoose Posted March 24, 2009 Report Share Posted March 24, 2009 I would really recommend resurfacing when installing a new clutch unless your really trying to keep it cheap. Especially if you want to avoid pulling a trans down the road. Resurfacing a flywheel cost me 50. 5 years ago. A dealership quoted me 35. the other day but you know how that goes. Link to comment
Recommended Posts