As many of u know I made it to Canby in with the ka running, idling, nd no problems. But u better post some past due updates on how I got it to idle n wat not so here it is
Here are the lil adapter tubes I made after cutting the intake to make it fit.
And the reason y it wouldn't idle is cuz of a vacuum leak, actually a few. I replaced some skinny hose towards the back by the idle control valve and replaced the sensor on there too and finally it was also leaking from one of the injectors I just replaced the rubber grommet for it, tried it fired right up like usual but this time it idled! After that I only had bout 3 days to install new electric temp gauge n to get ready for canby.