chopperkeith Posted January 18, 2009 Report Share Posted January 18, 2009 (edited) anyone have one for sale? u 67 Edited January 19, 2009 by chopperkeith Link to comment
chopperkeith Posted January 18, 2009 Author Report Share Posted January 18, 2009 no love? Link to comment
datzenmike Posted January 18, 2009 Report Share Posted January 18, 2009 For the '76? You'll want a U-67 head. Someone should have one near you. That's in Washington? Link to comment
Jason Posted January 18, 2009 Report Share Posted January 18, 2009 Try for an open or closed chamber A87/W53 head, it'll give you a useful bump in compression to 8.8 or so, little more pep if you're going to swap heads. Link to comment
datsunfish Posted January 19, 2009 Report Share Posted January 19, 2009 (edited) You posted about a 210 head. Did someone offer you one? I have a really nice 210 head I would give you for free if you want to take a trip up this way. Not ideal but free is free and it is in great shape.Also is it a L16 or L20b that you have? Edited January 19, 2009 by datsunfish Link to comment
Jason Posted January 19, 2009 Report Share Posted January 19, 2009 The stock 210 head on the stock L20b bottom will give you about 9.4:1 compression. Good bottom end, less good on the top end because of the smaller valves. Link to comment
fastdadd Posted January 19, 2009 Report Share Posted January 19, 2009 have you seen the thead where 808da6 has a closed chamber for sale http://forum.ratsun.net/showthread.php?t=8791 Link to comment
ppeters914 Posted January 20, 2009 Report Share Posted January 20, 2009 Or this thread? Seller may be close to you: http://forum.ratsun.net/showthread.php?t=9157 Link to comment
510er Posted January 21, 2009 Report Share Posted January 21, 2009 vancouver washington right? I have one that i can bring you when i head that way in a couple weeks PM me if you want it Link to comment
Recommended Posts