jluna94 Posted April 1, 2023 Report Share Posted April 1, 2023 Hi everyone, trying to figure out a salve cylinder for a 4spd Rl411. Is there a specific one that I need? Don’t know which one. Appreciate the help in advance 😁 1 Quote Link to comment
banzai510(hainz) Posted April 1, 2023 Report Share Posted April 1, 2023 those early Datsuns might be SAE threads. Maybe a 520/521 slave with the 411 rods might work. I am guessing Quote Link to comment
]2eDeYe Posted April 1, 2023 Report Share Posted April 1, 2023 A roadster one would likely work. Quote Link to comment
jluna94 Posted April 3, 2023 Author Report Share Posted April 3, 2023 Thanks for the response, will roadster clutch slave cylinder also work? Quote Link to comment
]2eDeYe Posted April 3, 2023 Report Share Posted April 3, 2023 They should, but I am not positive. Mine was an auto. 🙂 Quote Link to comment
bananahamuck Posted April 7, 2023 Report Share Posted April 7, 2023 (edited) for the slave cylinder try a 76-ish b210 it’s metric thread but it’s almost the right size . Might have to grind either slave or tranny for better fit , but I can’t remember,, it’s been awhile . and it’s very close size wise and best of all ,, cheap . Edited April 7, 2023 by bananahamuck Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.