Rhino Posted December 16, 2021 Report Share Posted December 16, 2021 Hey all I am new to this forum but hoping someone might have some help. I am restoring a 74 620 and am in dire need of a few rubber parts. I need the dust cover boots that go over the torsion bars at the crossmember. I want new ones perferably NOS but aftermarket would be my second choice. Also I need some of the grease and dust seals for the front suspension. If anyone has anything please let me know. Thanks Jaydee 818-314-5066 Quote Link to comment
Bleach Posted December 17, 2021 Report Share Posted December 17, 2021 hey, welcome to the forum. Instead of replying to an old conversation, I created a new thread for you. New Nissan OEM parts are hard to find and getting very expensive now. Have you tried searching on eBay to see what is available there? Quote Link to comment
Crashtd420 Posted December 17, 2021 Report Share Posted December 17, 2021 21 hours ago, Rhino said: Hey all I am new to this forum but hoping someone might have some help. I am restoring a 74 620 and am in dire need of a few rubber parts. I need the dust cover boots that go over the torsion bars at the crossmember. I want new ones perferably NOS but aftermarket would be my second choice. Also I need some of the grease and dust seals for the front suspension. If anyone has anything please let me know. Thanks Jaydee 818-314-5066 Those might be tough.. . I'd look for the part numbers see if nissan has them.... Try using this to find a part number... https://www.carpartsmanual.com/datsun/pickup-1972-1979 Make sure you look for the newer part number that might supersede the old.... Then search for it here.... https://www.nissanpartsdeal.com/ You might find the torsion bar boot but I think the front suspension rubber would just be part of new tie rods.... Or are you talking the hub seals? Quote Link to comment
EDM620 Posted December 18, 2021 Report Share Posted December 18, 2021 I'm thinking along the lines of unobtainium for those. I used some large commercial heat shring tubing, worked great. Quote Link to comment
FrankRizzo Posted December 18, 2021 Report Share Posted December 18, 2021 818 in da house!!!! . Quote Link to comment
EDM620 Posted December 22, 2021 Report Share Posted December 22, 2021 Found my pic of the "boots" I made - I think this is what you're wanting There is virtually no twisting movement at this end, this stuff also has a sealant so no worries about them leaking. 1 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.