Gery Posted April 28, 2020 Report Share Posted April 28, 2020 My glovebox insert was pretty rotten, and I got tired of stuff falling out from under the dash. My solution won’t apply to purists, but for those looking for function at low cost, this might help. I took a plastic ammo box from Harbor Freight (less than $5), cit the top and upper lid off, and it has a pretty good vertical fit in my 620. It is not as wide as the original insert but I used the extra space behind the glovebox door to mount a couple of charger outlets. It is much sturdier than the cardboard originals and fairly easy to pop in and out. Because it is abs plastic, I could even mount a light very easily. If anyone is interested I will take a photo. 1 Quote Link to comment
datzenmike Posted April 28, 2020 Report Share Posted April 28, 2020 Needs oics. Quote Link to comment
Gery Posted April 30, 2020 Author Report Share Posted April 30, 2020 https://imgur.com/gallery/lx3cxAp photos 2 Quote Link to comment
Dawa Posted May 1, 2020 Report Share Posted May 1, 2020 i cant wait to do a custom glove box set up and share it with all of you. Quote Link to comment
gene knight Posted May 1, 2020 Report Share Posted May 1, 2020 i wonder if this will work on a 521 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.