tdaaj Posted November 11, 2008 Report Share Posted November 11, 2008 any interest. have a full set with center caps. Link to comment
Phlebmaster Posted November 11, 2008 Report Share Posted November 11, 2008 What do they look like?? Link to comment
RandyinRenton Posted November 11, 2008 Report Share Posted November 11, 2008 I'm not up on the wheel specs on the newer vehicles... what size are they and what's the backspace? I'm going to be raising my 620 rather than lowering it so I would rather have less back space than most of the newer rims I've seen Link to comment
tdaaj Posted November 13, 2008 Author Report Share Posted November 13, 2008 I'm not up on the wheel specs on the newer vehicles... what size are they and what's the backspace? I'm going to be raising my 620 rather than lowering it so I would rather have less back space than most of the newer rims I've seen they are 17" by i believe 7.5". i'm trying to get pictures up. Link to comment
ariascarlos1990 Posted November 13, 2008 Report Share Posted November 13, 2008 Five spoke or six? or..... Link to comment
bagged_datsun Posted November 13, 2008 Report Share Posted November 13, 2008 do they look like this Link to comment
ariascarlos1990 Posted November 14, 2008 Report Share Posted November 14, 2008 That would be sick! Link to comment
tdaaj Posted November 14, 2008 Author Report Share Posted November 14, 2008 they do, just silver instead of black. Link to comment
tdaaj Posted February 17, 2009 Author Report Share Posted February 17, 2009 ok got pictures $100 for wheels only, or $175 for wheels and tires. Link to comment
PtheDude Posted February 17, 2009 Report Share Posted February 17, 2009 Will those bolt right up? Or do I need spacers, etc? Do they rub when you turn? Link to comment
Llittle_Llama Posted February 17, 2009 Report Share Posted February 17, 2009 Will those bolt right up? Or do I need spacers, etc? Do they rub when you turn? bolt up yes, same pattern, you will need to bore them or machine your hubs, and they might rub at full lock due to the tire size. Link to comment
tdaaj Posted February 17, 2009 Author Report Share Posted February 17, 2009 don't rub at all on a titan Link to comment
Llittle_Llama Posted February 17, 2009 Report Share Posted February 17, 2009 don't rub at all on a titan touche' :lol: Link to comment
72240z Posted February 17, 2009 Report Share Posted February 17, 2009 They look pretty nice actually. Noted..... lol Link to comment
tdaaj Posted March 15, 2009 Author Report Share Posted March 15, 2009 ok $125for wheels and tires, all hold air 245/75r17 bridgestones Link to comment
Jester Posted March 15, 2009 Report Share Posted March 15, 2009 Not to say you couldn't machine the centers of these wheels, BUT, it would be easier and safer to just machine the hubs or get spacers for stock steel wheels. Not the same configuration at the centers as thier aluminum counter part. Good luck Ted. Link to comment
ariascarlos1990 Posted March 15, 2009 Report Share Posted March 15, 2009 you don't need to spend the money machining the hubs. just pound the lugs through the hub and take an old fashion grinder to them aligners until they fit. :D p.s. Thats if you have disk brakes up front. but, if you have drums you don't have to worry about it. Straight bolt on. Link to comment
tdaaj Posted April 26, 2009 Author Report Share Posted April 26, 2009 $100 located in tenino wa 98589 Link to comment
Recommended Posts