Crazykidd9 Posted June 6, 2015 Report Share Posted June 6, 2015 This might be a really stupid question but I wanted to know if the 720 already comes with power steering equipped or not. Its my first Datsun, first truck and I'm trying to figure out whether it does or not.. Its a 1984 Nissan 720 Single Cab. 2 Quote Link to comment
harlow426@msn.com Posted June 6, 2015 Report Share Posted June 6, 2015 Many 4x4 came with power steering and tilt. I have only seen a few 2wd with powersteering. Tilt column even fewer. I have had 6+ 720's(80-86) and only 2(83std-83kc) had the factory front sway bar. If yours doesn't have power steering don't worry....easy to turn without. TILT in a std cab a must. Snag the swaybar and hardware off same truck if equipped. 1 Quote Link to comment
datzenmike Posted June 6, 2015 Report Share Posted June 6, 2015 It's an option. It may or may not.... lift the hood and look. The steering box will have two hoses going to it if it does. 1 Quote Link to comment
Crazykidd9 Posted June 16, 2015 Author Report Share Posted June 16, 2015 Thanks! I found out where it was, now the only problem I have is replacing the hose on it. 1 Quote Link to comment
Draker Posted June 16, 2015 Report Share Posted June 16, 2015 Hoses are available from Rockauto.com I had to replace mine, and it was fine. 2 Quote Link to comment
Charlie69 Posted June 17, 2015 Report Share Posted June 17, 2015 My 86 King cab 2wd has it. I see a lot of the 720s in AZ have power steering 2wd and 4x4. Quote Link to comment
datzenmike Posted June 18, 2015 Report Share Posted June 18, 2015 Limp wrists in Az??? 3 Quote Link to comment
Charlie69 Posted June 19, 2015 Report Share Posted June 19, 2015 Limp wrists in Az??? Just the way they were supplied form factory, there are a lot of Cal born trucks here. Quote Link to comment
datzenmike Posted June 19, 2015 Report Share Posted June 19, 2015 Cali limp wrists then? Quote Link to comment
Crazykidd9 Posted June 21, 2015 Author Report Share Posted June 21, 2015 Thanks for the info guys and the website Draker. I needed some help replacing the high pressure hose. It has a metal nut that I think holds it in place, do I just unscrew that and put in the new one? Will it mess up any of the pressure? Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.