nickel&dime Posted July 1, 2014 Report Share Posted July 1, 2014 I recently contacted Kelvin Dietz about starting another group buy for his traction bars and he agreed if I can get enough people he can make another run. These are known to be high quality traction bars at a great price.Information can be found here:http://community.ratsun.net/topic/54478-510-wagon-traction-bars-group-buy-gauging-interest/Purchase Info - $280 ShippedIn order to be a confirmed buyer, you will have to pay Kelvin 50% of the cost via PayPal up front. No money will be collected until we have the confirmed list of buyers. Once we get 6 buyers, I'll reach out to them via private message on the respective forum with Kelvin's PayPal address and they can pay him the 50% down payment. Kelvin will get to work on putting together the sets. Once the sets are complete, I'll again contact buyers and they can pay Kelvin the remaining amount. Once final payment is received, your parts will be shipped by Kelvin.Disclaimer/LegalThe buyer assumes all risk as to quality, performance and use of these products and agrees to hold Kelvin Dietz, Ryan Ash, and this forum harmless for any injury, loss, or damage; including any and all incidental or consequential damages arising from the sale, installation, or use of the products in this thread. It is suggested that State and Federal regulations be checked before using these parts on your vehicle.The List:1) Andrew (me)2) Fern1 (510realm)3) Kyushakai (510realm)4) Krakkaplease (510realm)5) Qwik510 (510realm)6) Nathan M. Quote Link to comment
datzenmike Posted July 1, 2014 Report Share Posted July 1, 2014 Looks good. (free ttt) Quote Link to comment
Son_of_a_Datsun_Guy Posted July 2, 2014 Report Share Posted July 2, 2014 They work, well. You can see them in my signature :lol: Quote Link to comment
nickel&dime Posted July 4, 2014 Author Report Share Posted July 4, 2014 Updated the list. We need four more goons Quote Link to comment
nickel&dime Posted July 5, 2014 Author Report Share Posted July 5, 2014 Half way there we need 3 more goons Quote Link to comment
nickel&dime Posted July 7, 2014 Author Report Share Posted July 7, 2014 Two more goons and we are good to go Quote Link to comment
nickel&dime Posted July 7, 2014 Author Report Share Posted July 7, 2014 Uno mas! Who's it gonna be.... Quote Link to comment
datrod Posted July 7, 2014 Report Share Posted July 7, 2014 Mr Big Tanker needs a set of these. Quote Link to comment
qwik510 Posted July 7, 2014 Report Share Posted July 7, 2014 I recently contacted Kelvin Dietz about starting another group buy for his traction bars and he agreed if I can get enough people he can make another run. These are known to be high quality traction bars at a great price. Information can be found here:http://community.ratsun.net/topic/54478-510-wagon-traction-bars-group-buy-gauging-interest/ Purchase Info - $280 Shipped In order to be a confirmed buyer, you will have to pay Kelvin 50% of the cost via PayPal up front. No money will be collected until we have the confirmed list of buyers. Once we get 6 buyers, I'll reach out to them via private message on the respective forum with Kelvin's PayPal address and they can pay him the 50% down payment. Kelvin will get to work on putting together the sets. Once the sets are complete, I'll again contact buyers and they can pay Kelvin the remaining amount. Once final payment is received, your parts will be shipped by Kelvin. Disclaimer/Legal The buyer assumes all risk as to quality, performance and use of these products and agrees to hold Kelvin Dietz, Ryan Ash, and this forum harmless for any injury, loss, or damage; including any and all incidental or consequential damages arising from the sale, installation, or use of the products in this thread. It is suggested that State and Federal regulations be checked before using these parts on your vehicle. The List: 1) Andrew (me) 2) Fern1 (510realm) 3) Kyushakai (510realm) 4) Krakkaplease (510realm) 5) Quik510 (510realm) 6) 5) qwik510 (510realm and Ratsun) Quote Link to comment
nickel&dime Posted July 8, 2014 Author Report Share Posted July 8, 2014 5) qwik510 (510realm and Ratsun) Quik510 I already got you down as #5 on the list ^^^ Quote Link to comment
qwik510 Posted July 8, 2014 Report Share Posted July 8, 2014 Quik510 I already got you down as #5 on the list ^^^ Yes. It's Qwik510 Not quik510 Quote Link to comment
crewy Posted July 8, 2014 Report Share Posted July 8, 2014 They make a shock that is shortened that's sits on top of the leaf that does the same factor. It dampens the ride with out forcing the leaf to bend as much. I added some on a mini truck that I searched the leafs on a 2in block it works great. That setup looks great as well. When I get my goon I'm gonna experiment. With both and make a tread out if and hope to have a battling out come. Not trying to knock just letting there's other stuff on the market out there Quote Link to comment
nickel&dime Posted July 8, 2014 Author Report Share Posted July 8, 2014 Yes. It's Qwik510 Not quik510 Fixed it we need one more goon Quote Link to comment
nickel&dime Posted July 8, 2014 Author Report Share Posted July 8, 2014 They make a shock that is shortened that's sits on top of the leaf that does the same factor. It dampens the ride with out forcing the leaf to bend as much. I added some on a mini truck that I searched the leafs on a 2in block it works great. That setup looks great as well. When I get my goon I'm gonna experiment. With both and make a tread out if and hope to have a battling out come. Not trying to knock just letting there's other stuff on the market out there Who's they? Are you talking about this: http://www.jcwhitney.com/hellwig-performance-traction-control-springs/p2005971.jcwx?filterid=c11307d1668y1972g2u0j1 Would they fit our wagons? A while I asked about them here: http://community.ratsun.net/topic/58601-traction-control-springs/ Quote Link to comment
nickel&dime Posted July 9, 2014 Author Report Share Posted July 9, 2014 ALRIGHT! The list is full. Everyone on the list please PM your email. Thanks Quote Link to comment
nickel&dime Posted July 10, 2014 Author Report Share Posted July 10, 2014 I added one more person to the list. This is the last call before weekend if you would like a set let me know. Quote Link to comment
Just Joel Posted July 10, 2014 Report Share Posted July 10, 2014 They make a shock that is shortened that's sits on top of the leaf that does the same factor. It dampens the ride with out forcing the leaf to bend as much. I added some on a mini truck that I searched the leafs on a 2in block it works great. That setup looks great as well. When I get my goon I'm gonna experiment. With both and make a tread out if and hope to have a battling out come. Not trying to knock just letting there's other stuff on the market out there No room above the leaf... Unless stock height maybe. Quote Link to comment
jim bob hex Posted July 13, 2014 Report Share Posted July 13, 2014 Room for one more order? Quote Link to comment
TENDRIL Posted August 29, 2014 Report Share Posted August 29, 2014 Or two? KA Ftw Quote Link to comment
carterb Posted March 6, 2015 Report Share Posted March 6, 2015 Sent you a PM with Kelvin's contact info. Quote Link to comment
TENDRIL Posted March 7, 2015 Report Share Posted March 7, 2015 is the raw metal just another piece of tube, or is it solid metal does anybody know? Quote Link to comment
TENDRIL Posted March 7, 2015 Report Share Posted March 7, 2015 and thank you carter Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.