junctionproduce Posted May 8, 2014 Report Share Posted May 8, 2014 Hi all, I have a 32/36 weber dgv. Is the red circle vacuum port a full manifold vac or ported vac? I already installed it and down want to take it off just to see if the vacuum port tracks to above or below the throttle plate. Quote Link to comment
datzenmike Posted May 8, 2014 Report Share Posted May 8, 2014 Should be ported or they wouldn't bother having that. You could just connect directly to the intake. Quote Link to comment
ggzilla Posted May 8, 2014 Report Share Posted May 8, 2014 And is doesn't matter anyways. Your engine will run good with ported vacuum, or will run good with manifold vacuum. Quote Link to comment
Sealik Posted May 8, 2014 Report Share Posted May 8, 2014 Ported...typical connection to dizzy. There is another to the far left which can't be seen in pic....tis capped. Just looked at my 32/36 DGEV Quote Link to comment
smoke Posted May 8, 2014 Report Share Posted May 8, 2014 With the engine running, put your finger over it to see if it's pulling at idle, if it's not, blip the throttle and you should feel it, that's ported. 1 Quote Link to comment
Driftease Posted May 8, 2014 Report Share Posted May 8, 2014 Are you going to be running your vac advance off of it or just curious? Quote Link to comment
banzai510(hainz) Posted May 8, 2014 Report Share Posted May 8, 2014 the red circle goes to the disstributor. blue circle is nothing!!!!!!!!!!! Quote Link to comment
junctionproduce Posted May 9, 2014 Author Report Share Posted May 9, 2014 thanks everyone for the good info- to answer some questions yes im running vac advance off it and was just curious. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.