bonvo Posted September 3, 2008 Report Share Posted September 3, 2008 im keeping my eyes pealed for a good square port 4cyl L series head im looking for this so i can build a performance head setup for the time when i dont have smog (easier to swap heads the motors) closed chamber is nice but not needed if it has a performance cam in it already thats a big plus i want to make it clear right now im just trying to see whats out there if its really somthing i cant pass up ill get it but this if for a side project and isnt manditory so if you guys have a good head that would give me good power i might be interested Link to comment
motavated Posted September 3, 2008 Report Share Posted September 3, 2008 I got one... I was about to junk it today... But I want to sell it as a set if you like. Headers, A87 "closed" head, l16 intake and a weber... The carb and head need a rebuild... Price? Let me know.... Link to comment
hang_510 Posted September 3, 2008 Report Share Posted September 3, 2008 i also have an A87 peanut that has been ported. needs a trip to a machine shop(looks like it was dropped on something and damaged the #3 CC), no cam/valves. $125 shipped Link to comment
mofoSTI Posted September 3, 2008 Report Share Posted September 3, 2008 im keeping my eyes pealed for a good square port 4cyl L series head im looking for this so i can build a performance head setup for the time when i dont have smog (easier to swap heads the motors) closed chamber is nice but not needed if it has a performance cam in it already thats a big plus i want to make it clear right now im just trying to see whats out there if its really somthing i cant pass up ill get it but this if for a side project and isnt manditory so if you guys have a good head that would give me good power i might be interested I have an A87 as well. It has been decked and is flat. It does have a cam that I recall was a regrind on a stock sss cam. Has all valves a rockers. 75$ plus shipping Link to comment
Phlebmaster Posted September 3, 2008 Report Share Posted September 3, 2008 I have one too. It is a 210 head that has been ported and has had some work done, and it is complete. You can have it for $25.00 plus shipping. You might have seen it on my 210 head and l-16 block for sale post. :D Link to comment
zerow Posted September 3, 2008 Report Share Posted September 3, 2008 What head are you running right now? W58 or U67? The round port W58 is undesirable for two reasons: round port exhaust and steel liners. The U67 is actually a better flowing head as it is square port and has the larger valves and is stock to the L20B. I have a W53 (READ: NFS!:fu:) that is going to get the machine shop trip, first class. New cam, new valves, a bit of some porting on the intake. But, for now I will run the W58 that I've got. Love the one you're with... Link to comment
Moisabamf Posted September 3, 2008 Report Share Posted September 3, 2008 i can give you some phone numbers if you need head......:D sorry couldnt resist Link to comment
Recommended Posts